Search results

I would chop when you get back. Don't think a little extra time will hurt much. Better to go long than to cut early. IMO

I have similar. I plastidipped the yellow tops black, then top coated it white. Helps keep light out, while also reflecting it. Also, the bigger the return pipes the better to avoid roots clogging the pipes. 2-1/2 sch 80 is good, 3" sch 80 better.

I use Jacks 321. I like how I can adjust each part based a particular strain, whether that be more or less Calnit, more or less Epsom salt, etc. I can custom fertalize. Not to mention how cheap it is. I haven't used many other brands, so I may be biased. I will say I hardly ever go above 5/8...

Your fan shuts off more than it is on, and the environment inside the tent stabilizes. The exhaust acts as a cooling function and only turns on when Temps get too hot. The rest of the basement acts as a lung room, and should be kept cooler than the tent.

Do you have a tent? Keep heater in tent along with humidifier and dehumidifier. Run both at preset levels the do not counteract each other or based on relative humidity levels of time of year. Run heater and exhaust fan through a temp controller. Wallah, you have a controlled environment in a...

I too grow in a basement. Had to invest in oil filled heater, dehumidifier for summer, and humidifier for winter to help dial everything in.

Your VPD is in range, but I would shoot for higher Temps in the low 80s if using a LED. Then adjust your humidity to get your VPD where you want it.

Personally I think the EC is too high. I would drop, but I feed lower. I dont ever get over 5/8 of the manufacturers recommended strength.What is your Temps, humidity levels, and light source?

I know this thread is a bit old, but just ran the Collin OG again with a full koolatron cure this time. I can say it grew great, looks great, smokes great. Only caveat is that with the full koolatron cure, when I take it direct from the fridge, it smells of perfume. Never had that before. Only...

Gonna chime back in here say, damn this is the easiest and best way to cure some bud. Straight cut off the vine right into the cooler. Drop down 1% per day. Been chilling at 55f and 3 wks later 58% humidity, and damn everything fine. Might be best thing I've added to much arsenal. I'd never go...

Also, for those that want to guess when I found my fridge not leaning back far enough to drain, can you see it?

Alright, just pulled a sampler out of the fridge for wife, she was dieing to try, and it smelled, tasted, and felt sticky icky! I can't wait to try for myself in 2 wks, still get randomed can you believe that shit, anyway a much appreciated and huge thank you to @Hook Daddy . You the man!

A quick point of emphasis I would like to make is to make sure the fridge is level or slightly leaning back. I didn't catch it at first and was experiencing very high, sudden, and feequent humidity swings. Put my hand under the lowest rack and it was soaking wet, none of the moisture was...

Up and running. Was able to fit half of my harvest in the koolatron packed to the gillsfor 1 plant. I guess it will give me a chance to compare. Threw in the koolatron without hanging at rh 75 and walking down 1 degree a day. Anyone have spikes up to high 80's then come down and re-regulate?

Alright, y'all convinced me. I got my stuff on order and will be joining the koolatron club. If I have any questions I will be sure to ask on here.

Plastic threading doesn't strip too easy, but it is a 1 time tightening and done. Once tightened they cannot/should not be reused.

Grand scheme of things, your saving money. But I get it, $100 is $100. Especially in current market conditions when our dollar doesn't buy as much as it used too. Keep us posted either way you go. Others can learn, replicate, or improve based on all our posts here.

I did these for bulkheads. No too expensive, but depends on your budget.

I did this with the conduit with a 4 site tote system. About half ended up leaking and had to pull emergency silicone duty. After that run a tore it all down and spent the money for legit bulkheads at about $13 a PC from an online fish pond store. No issues since. Also agree with the square...

Thanks for the response @calvin.m16 Apreciate it. I have removed some lower growth, especially the stuff that looks bad. Lowered the EC a bit and been keeping a closer eye on things. May have gotten too lackadaisical with things for a while there. I don't doubt my mix could be the issue, but...