Search results

I'm looking at that thinking,damn that looks bigger than 2x4.......duh meters not feet.

What works even better for about $12 are the anti vibration clamps with the neoprene. I can't recall what they are called.They have the added bonus of dampening any vibration.

http://www.ebay.com/itm/190941352432?var=490201852833

I would run2 6s.just because of the size run them end to end down the 6 foot way. You'll get better coverage

Ok, big problem. They are junk. They are booster fans. any sort of air restricyion and your airflow is nonexistent. This is a can fan. http://www.roguehydro.com/can-fan-s-series-600/?ref=lexity&_vs=google&_vm=productsearch&gclid=CIq5sp35ncoCFYIaHwodEMoEjg You need a good fan with hps or it's...

what size is the room?You still want to trace out your power line. It may run 2 or 3 rooms. If that is the only thing on the circuit you are good to go.I believe it draws 8.4 amp constant but you want a 2 lee way for start up in a 1000.

Is it a fan that looks like a piece of stove pipe?

If your're having trouble with it willting. tie it of to screen. Get bees wax warm up a lttle in your hand,cover the wound and seal t.

Those 3 outlet didn't work because the 240 feed is coming from the attic.

What the guy did was split his 240 into 2 120s.I couldn't tell you why your heating element isn't working.I would assume you hooked something up wrong

I rigged a reducer with the poly end cap that comes with the cool tube (Cushioning that looks like Styrofoam). had an extra 4 inch fan,the 6 inch died after 12 years.I just used the end of the fan to mark it slid in the duct cut out the 4 inch hole. slid over fan,that was 6 months ag.

There is the prob. don't suck air from outside room through cool tub. you need to move air inside too.Just disconnect duct that is pulling air into tent. It will pull air from inside tent to filter.filter fan outside ducting on end that sucks to cool tube. leave other end with out duct open vent...

like this

It sounds as if you have fan hooked up backwards. You should have 1 of two ways1)filter hooked direct to fan blowing air threw cool tube to exhaust port,or duct hooked to cooltube out exhaust port to fan and filter mounted out side the ten. option 1 is best as air going through cool tube is...

Makes me wonder. We had an old water chiller for milk cans back on the farm.I wonder if that uses metals that are no good.I know it still worked 6 years ago. We used it at a party to keep the beer cold.

Strains are all diff. Some burn @ 700 ppm while others you can bump up to 1500 ppm.As a general rule of thumb. New veg I start out at 300 ppm. and bump up until I get no ppm. drift.3rd week of veg ,I can normally go between 5-600 ppm. and change out nutes again night before flower start at...

They are fused. The fuse is right under/part of were your 120/240 goes in it's a little plate that pops off. If you just run a cheap booster fan,about $20 from the top port,it should expel a majority of the hot air.

nope. Kosher bacon.

Don't forget the coffee and eggs.

One thing you may be able to do if your camera is good enough quality is tale a good magnified close up and look at them on yuor pc.