Vert Scrog Flooded Tube Banana OG, Dog Kush 1000w

[jigfresh]

Did you check under the porch? Brush some pine needles aside? Hehe

Too funny... are you sure you weren't watching me today. The cloner is cleaned out of murky water and pine needles. Never found the pump, I think it's dead somewhere. Clones tomorrow insha allah (god willing).

 

[whodatnation]

What the hell were you trying to work on a live panel or something Im also familiar with the taste of electricity not fun.
Really even without the help of dangerous tools its still a wonder how most of us are still here! I really cant tell you how many times I should have died, AT LEAST 10 times... I may have actually died a couple of times lol

How the yin treating you tonight mrJ?

 

[bassman999]

A guy I worked with got a circular saw caught on his wedding ring and it ripped his finger backwards.
I took him to the hospital, and they said it was ruined and amputated.
Prolly since he had no insurance though...

I have put a few 18ga bran nails through my fingers, I have had the drill twist my wrist too Jig.
I had a table saw with an old blade bind up and spit a piece of mdf into my face.

 

[whodatnation]

I was thinking of you when writing that out! Bass, stay away from power tools, we like you too much around here and you need those fingers for posting!

 

[bassman999]

I was thinking of you when writing that out! Bass, stay away from power tools, we like you too much around here and you need those fingers for posting!

I make it a point not to use tools of any sort while high, but that kinda limits me since I am high often...

 

[whodatnation]

lol if I limited myself to not doing anything while I was high Id be covered in bed sores... Am I allowed to commit the act of toking up while Im high though? Hmmm and the mysteries of life and the universe continue to surprise me


Bass you need this~

Its a bear suit... Like if you ever get attacked by a bear, or anything else for that matter.

 

[bassman999]

lol if I limited myself to not doing anything while I was high Id be covered in bed sores... Am I allowed to commit the act of toking up while Im high though? Hmmm and the mysteries of life and the universe continue to surprise me THIS


Bass you need this~

Its a bear suit... Like if you ever get attacked by a bear, or anything else for that matter.

I would def get hurt putting that thing on, its like the band-aid wrapper giving you a paper cut.

 

[whodatnation]

Ok, how about a bubble like bubble boy? Surly you can't get hurt chillin in there 24/7.


nevermind, just saw a YouTube vid where someone actually died in one... Back to the drawing board.

 

[jigfresh]

What the hell were you trying to work on a live panel or something Im also familiar with the taste of electricity not fun.
Really even without the help of dangerous tools its still a wonder how most of us are still here! I really cant tell you how many times I should have died, AT LEAST 10 times... I may have actually died a couple of times lol

How the yin treating you tonight mrJ?

It was when I installing the new 200A panel a few years back. I did the whole rewire job, put the panel in, all the breakers, etc... never shocked myself once. Then the last day, got the power company to turn on the power to the new service, all good. I think I needed to wire one more hot into it's breaker, so I turned the main 200 switch off, before I opened the cover to get in the inside. I put the last wire in, and then laid my screwdriver on top of the breakers. It's the kind of panel that has the breakers going down vertically in the middle, so the pins or fins they attach too are also down the middle. Well I was all done, so I switched the main back on to see if everything stayed on. All good.

Reached to grab the screwdriver and POW. Like I said, next thing I remember was standing about 10 feet away from where I was, I had thrown the screwdriver across the yard. My middle finger on my right hand literally brushed up against the pin with the big boy power in it. I'm pretty sure if I would have gotten my finger cleanly on that pin I would be dead. I'm really glad my wife didn't have to come outside to find me dead.

One moment of carelessness. Fucking scary stuff. The reason I've never ridden a motorcycle.

EDIT: and on the 'should have died' tip, I got a few stories. I should be dead too.... it's why I got my tattoo.

 

[Smoothkicksandsmoke]

Man it sounds like all of us could use the bear suit. Thing looks like a Darth Vader costume. lol. I've learned that when using power tools the best thing to keep in mind is the best bail route. I've escaped a circular saw incident a couple times using that method. I've been pretty fortunate with electricity though, only 120V shocks. lol.

Y'all are right though. All it takes is that one second of carelessness. Sometimes not even that.

 

[supchaka]

A JIGsaw would cut it well too! and not too dangerous!

 

[bassman999]

I have had my share of shocks too, several I could mention.
I missed that one Jig, glad u made it out of that one!!

And that does look like an astronaut, Darth Vader, or a Storm Trooper costume to me.

 

[whodatnation]

I've learned that when using power tools the best thing to keep in mind is the best bail route. I've escaped a circular saw incident a couple times using that method.

lol so I got the image of a circular saw chasing you around while its running, but you make it out because you have a bail out rout oh lawd here I go again,,, decided to test all my hash bits earlier to see if they are drying/burning properly... They are burning just fine

 

[Smoothkicksandsmoke]

lol so I got the image of a circular saw chasing you around while its running, but you make it out because you have a bail out rout oh lawd here I go again,,, decided to test all my hash bits earlier to see if they are drying/burning properly... They are burning just fine

hahahahah. Something like that and I can see someone thinking that. Only soon as I start to feel it kick I'm the fuck away from it. Luckily the trigger on my circular doesn't lock while running. I've seen some that have a lock to keep the blade going. No thanks….lol.

from the sounds of it the hash is good.

 

[whodatnation]

Sharp blades and triggers on circular saws that don't lock can go a long way lol

 

[Thundercat]

So how about using a pvc "V" channel like a piece of flashing or something so that you dont have to cut the pipe in half? Maybe epoxy it in, or silicone it in?

 

[whodatnation]

So just wondering here... Youv never had a clogging issue in this system in the past right? If so I wouldn't even bother with it. Its a great design/idea really smart, but is its absolutely needed in this system?

 

[jigfresh]

First off, whodat. I like you on the hash, hahaha.... you crazy! But about the flooding, yes infact I have had flooding issues, only one time was a big deal. But I had to make little water catchers to divert all the water running out the tubes back into the rez. It was the one time I vegged the plants out a litltle longer... and this round I am planning on running the plants a little longer in veg, so there you are. I'm thinking it wont be very hard, the tubing I have can be cut with scissors or a blade, and I only really need a few inches for each of the plants (6)... the rootball is only extremely large just below the plant, the rest stretch out. You know, I could just have them along the bottom of the big pipe? Just a diversion channel to keep the water moving? Shit, now I'm confusing myself.

Anyways... that's for another day. Today we have plants. WOOOOT. There are 6 lovely "Headbands" in the closet, however, me and the guy I got them from suspect it may be another strain. He had some buds from the same plant that smelled a bit like cheese. Mmmmm cheese. Paging mr west, paging mr west. So we shall see what they end up looking, but the buds to me had the look of cheese and smell too. The high was more of a cheese high as well vs a headband high.

I need to wash the soil off their roots, transplant them into netpots, fill with hydroton, fill the rez with water, measure out some veg nutes, and set up the airpump/ stones. Yay... we're growing again!!!

 

[F.M.I.L.Y]

First off, whodat. I like you on the hash, hahaha.... you crazy! But about the flooding, yes infact I have had flooding issues, only one time was a big deal. But I had to make little water catchers to divert all the water running out the tubes back into the rez. It was the one time I vegged the plants out a litltle longer... and this round I am planning on running the plants a little longer in veg, so there you are. I'm thinking it wont be very hard, the tubing I have can be cut with scissors or a blade, and I only really need a few inches for each of the plants (6)... the rootball is only extremely large just below the plant, the rest stretch out. You know, I could just have them along the bottom of the big pipe? Just a diversion channel to keep the water moving? Shit, now I'm confusing myself.

Anyways... that's for another day. Today we have plants. WOOOOT. There are 6 lovely "Headbands" in the closet, however, me and the guy I got them from suspect it may be another strain. He had some buds from the same plant that smelled a bit like cheese. Mmmmm cheese. Paging mr west, paging mr west. So we shall see what they end up looking, but the buds to me had the look of cheese and smell too. The high was more of a cheese high as well vs a headband high.

I need to wash the soil off their roots, transplant them into netpots, fill with hydroton, fill the rez with water, measure out some veg nutes, and set up the airpump/ stones. Yay... we're growing again!!!

Cheese Headband? Sound interesting, although I think the guy you got it from has a labeling deficiency! lol Glad you got plants, if you want I still have a GSC plant, I tried calling you back but your voicemail was full.

Peace
FM

 

[jigfresh]

Haha labeling deficiency I love it. I really enjoyed the high of the buds. I got a little sample of some cherry pie to try as well... looking forward to that.

I'm full up with the 6. Thanks though. And yeah, my voice mail has been full for months. I'm kinda a dick with that.