My plants are too tall! PLEASE HELP BEFORE ITS TOO LATE!!!

[Gumchi]

My plants are only 2 weeks into flowering and they grew way taller than I had expected. There is only 1ft4in left space between them and the reflector which is way to hot for buds to do good in, and the only fan I got going is blowing over the top of them.
What can I do to fix this? I am getting tempered glass to put in the reflector but how should I do the ducting and the fan connected to the ducting? I have never set one up before nor seen one set up.
Is there any another way to fix this problem other than stated above?
PLEASE HELP! I only have 2-3 weeks left untill they hit the reflector and then....I am done for

 

[kmksrh21]

LST and/or supercrop the shit outta that mother fucka!

 

[Gumchi]

What is that?

 

[Gumchi]

My plants are in flowering is it too late to bed or tie them?

 

[kmksrh21]

My plants are in flowering is it too late to bed or tie them?

It's recommended for veg, but if you're growing into your lights, tieing down is better than burnt/bleached buds...

 

[ohmy]

hook up the cool hood. you need duct and duck fan so you can let the plants about touch the light

 

[Gumchi]

True, but is there a way to install ducting and some type of fan blowing through the reflector to prevent the reflector from getting hot?
if so what do I need to install it? Im a noob haha

 

[Gumchi]

Whats a duck fan and what is a good brand I can get under $100

 

[kmksrh21]

hook up the cool hood. you need duct and duck fan so you can let the plants about touch the light

Great point! I just realized your pics are of a air cooled hood with out duct work...

get that goin' too and you can get damn near the light without high temps...

 

[Gumchi]

How do I set one up?

 

[ohmy]

True, but is there a way to install ducting and some type of fan blowing through the reflector to prevent the reflector from getting hot?
if so what do I need to install it? Im a noob haha

read a lil more. Ebay for fan and if you have the funds do not cheep out because you could run two hoods with one fan,lowes has the duct work or ebay for fan,filter and duct work for 175 I think...

 

[Gumchi]

I only have one duct connector to go into my reflector. Is that okay or do I need two?
So basically tell me if I'm wrong but all I need is ducting to go from the reflector to a fan sucking out the hot air in the reflector and expelling it into another room/outside. Is that basically it?

 

[ohmy]

yeah, why only one out let on light? can you ad another or did someone take it off? i see one in the picture you posted

 

[Gumchi]

They guy who I got it from was a crackhead and lost the other one haha I'm not sure where to get anther.
I have a sunlight supply-Super Sun reflector.
Will only having one be bad?

 

[ohmy]

get ahold of light company or make one out of duct the size of hole......cut slits in end of duct,bend every other tab out then put in hole and bend inside tab...wala easy fix,lil reflective tape to air tight the bitch and good to go

 

[Gumchi]

What do you mean? I dont quiet understand what your saying

 

[Gumchi]

If I have two duct connectors shouldone side pull in air with one fan and the other side pull out air with a different fan?

 

[ohmy]

4inch hole right? or 6...take a piece of duct pipe the size of hole...on the end put lil over inch cut strait up pipe and do that every 1/2 inch or so

 

[Gumchi]

read a lil more. Ebay for fan and if you have the funds do not cheep out because you could run two hoods with one fan,lowes has the duct work or ebay for fan,filter and duct work for 175 I think...

When you spoke here about a filter, what type of filter were you talking about?
Sorry for so many questions =/

 

[Gumchi]

4inch hole right? or 6...take a piece of duct pipe the size of hole...on the end put lil over inch cut strait up pipe and do that every 1/2 inch or so

Is this just to make another duct connector on my reflector out of ducting?