Club 600

3eyes

3eyes

Well-Known Member
600w digi's all the way in my op and any others i set up never liked all that heat the core and coil ballasts give off.
 
  • Like
Reactions: DST
1badmasonman

1badmasonman

Well-Known Member
Ok i got a question for any knowledgable hydro growers. I just bought this Hanna Ph CF PPM monitor.



There are a slew of calibration solutions and probe solutions.

Can someone enlighten me on what ill be needing. Theres Multiple PH cal solutions & ppm solutions? Im lost hahah.

Thanks 1BMM​
 
JimmyT

JimmyT

Well-Known Member
Don Gin and Ton said:
so

after all the shitty luck ive had for a week or more ive finally had some good luck. im not homeless due to fire.

check my ballast out.




maxibright compact. never again. house was full of smoke when i got in.

mew digi on monday.

im going out to celebrate not being in cuffs!
Click to expand...
Now THAT's fcuking scary stuff!! I'm glad nobody's hurt and you're able to smile about it. That made my hairs stand just thinking about the alternative:leaf:
 
Dezracer

Dezracer

Well-Known Member
I'm about to re-hang my cooltube in the new grow room and thought of something.

Will these things (cooltubes) spread light farther out the sides or the ends? Seems to me they would better spread the light out the sides so I'm thinking that I shold turn it 90 degrees from how it was before. My two tables will be 36X42 each but I'm only putting one up today. I'm thinking I should have the cooltube running down the 36" part so the light coming from the sides of the cooltube will have the farther distance to travel in order to reach the ends of the table instead of how I had it before.

Any suggestions?
 
Heads Up

Heads Up

Well-Known Member
Don, as cof said, an admirable attitude. I think I too would be thankful...and switching to a digital ballast. Scary shit!
 
Heads Up

Heads Up

Well-Known Member
Good luck with the meter masonman. I bought the hanna simple ppm meter, it looks just like their checker ph meter except it's blue. I don't have to worry about all the different calibrations. Mine came with some solution and I ordered an extra bottle. It should say somewhere what the calibration solution is you need. For my ph checker I have a solution for the probe storage and two calibrating solutions for the ph meter.

To be honest, I used well water my last grow and it wasn't until the end of the grow when I had to start using my own tap water again that I started ph'ing my solutions. Before that, with well water, I added whatever and gave it to the girls, no checking anything. I miss that.
 
Heads Up

Heads Up

Well-Known Member
Damn, damn, damn. The seed fairy stomped all over my romulan x timwarp. So it looks like Casey Jones is going to have a new room-mate, casey, meet headband.

DST, my puppy puff is sick and I don't know what's wrong. I think this batch of plants is just not going so well due to the caterpillars in the beginning. No big thing this was just an 'in between' thing while I waited for my mothers to mature enough to take clones. I'm taking seven more cuttings tonight and then putting the mothers to rest. I already have casey and headband soaking in 25ppm water. Hope to pop a tap root out tomorrow by the time I get home from golfing, 8:05 tee time. This germination method, just letting them sit in water until a tap root pops is great. There is no guessing you just look in the cup to see if a root has started. No paper towels, moisture boxes, or planting them and wondering if they are going to pop. Let the tap root pop out a bit and plant the baby in a peat pellet and let er' rip. I'm saving the other dogs for a full blown grow. They are getting the full treatment, big containers, good veg time, good light, good temps, good humidity, good air circulation and plenty of tender loving care from their daddy. I'm growin' me some great danes.
 
1badmasonman

1badmasonman

Well-Known Member
Heads Up said:
Good luck with the meter masonman. I bought the hanna simple ppm meter, it looks just like their checker ph meter except it's blue. I don't have to worry about all the different calibrations. Mine came with some solution and I ordered an extra bottle. It should say somewhere what the calibration solution is you need. For my ph checker I have a solution for the probe storage and two calibrating solutions for the ph meter.

To be honest, I used well water my last grow and it wasn't until the end of the grow when I had to start using my own tap water again that I started ph'ing my solutions. Before that, with well water, I added whatever and gave it to the girls, no checking anything. I miss that.
Click to expand...
Yeah simple is best is guess. Maybe they will send the stuff with the meter. Didnt say anything in the product description though.

Hey headsup i ordered a new fan & filter lastnite. You should come by my thread and check it out. Its the link right over roger out mascot.

ptone said:
I'm new to the club 600w Digital Ballast 3x3 Tent Lemon Kush, Grand Daddy Purple, Bubba-OG Kush :)
Click to expand...
Welcome ptone got any bud porn to show off?
 
shnkrmn

shnkrmn

Well-Known Member
I'm surprised it didn't come with a starter pack of solutions. I have three of them (actually I have the dual readout model so you can see both ph and ppm at the same time without having to toggle the display.) and they come with a foil sachet of pH 4.0 calibration solution, another of pH 7, and the 1500 ppm solution and a probe cleanser too. and directions for how to use them. At any rate, you'll need a bottle of each and a couple of short test tubes. You can get the solutions here or from a lot of other hydro dealers. They are pretty important for using meters!

http://www.thehydrosource.com/PH_EC_TDS_Meters_Solutions/Hanna_Instruments



1badmasonman said:
Ok i got a question for any knowledgable hydro growers. I just bought this Hanna Ph CF PPM monitor.



There are a slew of calibration solutions and probe solutions.

Can someone enlighten me on what ill be needing. Theres Multiple PH cal solutions & ppm solutions? Im lost hahah.

Thanks 1BMM​
Click to expand...
 
ENDLSCYCLE

ENDLSCYCLE

Well-Known Member
What up 600

I truly love my Can Filter....was thinking of trying out the phresh filter when it's time to replace.....but the mostly looked over part of any filter system is the prefilter...should be replaced every grow if you can...IMHO

Got three out of four plants cut out of the GreenRoom.....so far at 9OZs....I let the last one go another week due to her having a little under water wilting early in flower...she was just never the same after...but prob gonna be the biggest yielder....kinda funny cause I just finished reading an article about stressing plants by underwatering to increase yields...Fkn Awesome!!!!

Will post a few harvest pics maybe tonight......def. soon tho!!!!
 
Dezracer

Dezracer

Well-Known Member
Dezracer said:
I'm about to re-hang my cooltube in the new grow room and thought of something.

Will these things (cooltubes) spread light farther out the sides or the ends? Seems to me they would better spread the light out the sides so I'm thinking that I shold turn it 90 degrees from how it was before. My two tables will be 36X42 each but I'm only putting one up today. I'm thinking I should have the cooltube running down the 36" part so the light coming from the sides of the cooltube will have the farther distance to travel in order to reach the ends of the table instead of how I had it before.

Any suggestions?
Click to expand...
Nobody has an opinion on this eh?
I wish I had a light meter right now so I could just test it out but I don't...
 
You must log in or register to reply here.
Top