A Medicinal Refrigerator

Danielsgb

Well-Known Member
everything is looking daniels'esque!!!

i wouldnt glue it personally. i would use some HVAC foil tape and tape it in a few locations. i am weird though, i have a real problem making anything in any of my cases permanent. glue is permanent. magnets will hold it on well as well, probably better than tape or glue, and more reusable, if those systems came with hard drives then you can take em apart and grab a few high power magnets.
I'll go with Velcro. This is the other side of that door piece.
Daniels:weed:
CMH PC 017.jpg
 

gumball

Well-Known Member
Good call with the velcro! And awesome pic on the case. You will have to give us some full body shots when she's all done.
 

Danielsgb

Well-Known Member
I got that Velcro'd and I'm testing it out. Just the top fans are going and that therm. is on the bottom. Amb.85.1 PC 83.1 I don't trust that yet but encouraging.
Daniels:weed:CMH PC Velcro.jpgCMH PC Velcro Door.jpg
CMH PC Velcro Door 2.jpgCMH PC 021.jpg
CMH PC 022.jpg
CMH PC 023.jpg
 

Danielsgb

Well-Known Member
So who thinks plants can tell what's going on around them? Did they know the measuring was for the PVC cage to hold the Black 3mil bags? Did the fitting of the bottom before I put the bags on today give them a hint? On the morning coffee
check up I thought they looked good. This afternoon when I checked them, white hairs from some nodes. I already got this far and I want them to get going so bout 5pm or 6pm the top goes on for 2 or 3 weeks. Can't believe all 3 fit.
14hrs 2min today so tomorrow it would be 13hrs 59min. But I see them getting closer to 12hrs tomorrow when I dome them.
Daniels
Trickin em' 002.jpgTrickin em' 001.jpg
CMH PC 022.jpgTrickin em' 003.jpgTrickin em' 006.jpgTrickin em' 004.jpg
 

HowzerMD

Well-Known Member
I scanned through this real quick to get updated. You are truly an innovator of the culture. I love the grow fridge and this PC looks to be successful. I'm going to keep checking in.
 

gumball

Well-Known Member
thats funny daniels!! ok so august 17, next year you have to leave one out to see if they take this long to show sex or not!!! looks cool, but will it allow adequate ventilation? maybe next time you have to build one you could try the lanscaping fabric which is used to prevent weeds in flower beds and what not. little more airy, but doubled up should be light proof. in a single layer it probably wont be light proof
 

Danielsgb

Well-Known Member
I got the glass mounted and the temp sensor too. Testing temps now. Only top fans are going. 74.5 when I started the bulb. 15 or 20 min. later 74.3 I may be able to run the lower fans less than I thought.
Daniels:weed:
CMH PC 004.jpgCMH PC 003.jpgCMH PC 005.jpg
 

Danielsgb

Well-Known Member
Very nice!! Can't even tell the difference in brightness with the 100watter by the pic's.
Room amb. dropped 2.7 E-Series at 72.9. I can press the top of my hand on the glass, just warm, and metal reflector not even warm. Main fans will be for some air flow and thats it. PCC 2 plants going in soon.
Daniels
 

gumball

Well-Known Member
is that plastic tote a sign of something new? or will this one be potted like mini-matilda?

how is mini-matilda doing?

EDIT:nevermind, i forgot what pcc was. now i know!!! they will rock in there.
 

Danielsgb

Well-Known Member
is that plastic tote a sign of something new? or will this one be potted like mini-matilda?

how is mini-matilda doing?

EDIT:nevermind, i forgot what pcc was. now i know!!! they will rock in there.
Here's Mini Matilda from a few days ago. 8-14, I see now I loaded it. She's at 60 days today. You reminded me I better 'scope her tric's. I'll get a new photo later up here.
CMH PC 013.jpg
Here's a pic of the 2 going in this PC.
Danielsbongsmilie
CMH PC 002.jpg
 

Danielsgb

Well-Known Member
Here's the 134 CFM fan's I put into my Main Chamber trying to cool it down. Duct Tape and Foil Tape worked once again. I also added another 4" hole for passive intake. Tomorrow I'll see how it's temps go.
Daniels:weed:
Comp Exhaust 001.jpgComp Exhaust 003.jpg
Comp Exhaust 004.jpgComp Exhaust 006.jpg
Comp Exhaust Fan.jpgComp Exhaust Wired.jpg
 
Actually I have not yet see a refrigerator that really cure disease. But I know that there is a medicinal refrigerator. There is really a refrigerator that can surely answer your needs for medical refrigeration.
 

crazytrain14

Well-Known Member
whats happenin daniels.

i like the pc design alot. im very interested to see how it works out for you. what strain is that you are putting in there?

peace
 

Danielsgb

Well-Known Member
Actually I have not yet see a refrigerator that really cure disease. But I know that there is a medicinal refrigerator. There is really a refrigerator that can surely answer your needs for medical refrigeration.
what??????

I was wondering the same thing. I got all excited and thought daniels updated, but it was that "regfridgerator" babble.:confused:
Here's a pic of the two that are flowering in the fridge.

whats happenin daniels.

i like the pc design alot. im very interested to see how it works out for you. what strain is that you are putting in there?
peace
I'm lovin' these CMH. I think this PC will work really good. It's running .7 degree under ambient.:clap:
It's strain is somewhat unknown. My former caregiver I cloned for had a couple different ones. It's a NY Diesel if that means much. Maybe a cross involving Diesel? I had to explain what a node was to him. One of the two in the fridge is the same strain. They smell more than the Royal Kush I just harvested.
Daniels:weed:
8-26 Round II 003.jpg8-26 Round II 004.jpg
 
Top