$upa$wag3r
Member
Is 10-15-10 plant food plus a good or a bad thing to put on muh plants? ![Confused :-? :-?](/styles/smilies/icon_confused.gif)
![Confused :-? :-?](/styles/smilies/icon_confused.gif)
Is 10-15-10 plant food plus a good or a bad thing to put on muh plants?![]()
Well, If you're in flower, you want the middle number to be higher,if in veg, you want the first one to be higher.The numbers stand for how much Nitrogen,phosphorus, and potassium are in the fertilizer,or N-P-K. So that would be a fert I would use during flower, because it has more Phosphorus, or P.For veg, you want the N, or nitrogen, to be higher. https://www.rollitup.org/view.php?pg=faq&cmd=article&id=106
And here's a webpage that goes a little more in depth.
Marijuana
Nutrients And Growing Hydroponic Marijuana
Nutrient (or fertilizer) is food for plants. Marijuana plants need a certain amount of food in order to grow properly. The primary nutrients in plant foods are Nitrogen (N), Phosphorus (P), and Potassium (K).
In addition to nitrogen-phosphorus-potassium, marijuana plants require a lesser amount of secondary nutrients and trace quantities of other elements.
Secondary nutrients are calcium, sulphur, and magnesium. Trace elements are small quantities of boron, copper, molybdenum, zinc, iron, and manganese.
Plant foods are measured in an N-P-K format
N is Nitrogen
P is Phosphorus
K is Potassium
A 15-15-15 plant food contains:
15% Nitrogen
15% Phosphorus
15% Potassium
A 20-10-10 plant food contains:
20% Nitrogen
10% Phosphorus
10% Potassium
The percentage of the solution not used by nitrogen-phosphorus-potassium is secondary nutrients, trace elements, and inert material.
An all purpose nutrient with secondary elements like calcium, sulphur and magnesium and trace elements boron, copper, molybdenum, zinc, iron, and manganese will get you through all stages of growth. But during different stages of life, you can adjust the different nutrient levels needed at different times to optimize growth.
Regardless of the nutrient you choose, during the first two weeks of life and the first two weeks of flowering growth, use half the amount (or less) of nutrient solution the manufacturer recommends for adult growth.
That is, if the nutrient package says to mix one tablespoon of nutrient to every gallon of water, you should add less than half a tablespoon of nutrient to every gallon of water for the first two weeks after sprouting and flowering.
This is not essential when flowering but it is for seeds and clones. Some marijuana growers don't add any nutrients to the water for the first two weeks. They then use a 50% solution for two weeks, then go to a 100% solution.
During vegetative growth the plants need lots of N (nitrogen). They also need a fair amount of P (phosphorus) and K (potassium), 20-10-10, or 30-15-15, or something similar, with trace elements should do it.
During flowering the plants need more P (phosphorus) and more K (potassium) than they did during vegetative growth. They need some N (nitrogen) but not as much as they did during vegetative growth. They also need calcium.
If you used:
--- something like 20-10-10 for vegetative growth, then try using 10-20-20 (or similar) for flowering.
--- something like 30-15-15 for vegetative growth, then try using 15-30-30 (or similar) for flowering.
If you can't find nutrients containing the proper combination for your needs (or you are not sure what kind of nutrient to get), look for a hydroponic nutrient recommended for growth when the plant is in the first stages of life and look for a hydroponic nutrient recommended for blooming (or flowering) when the plant is in the flowering stage. Make sure the nutrients you use contain trace elements.
Two and three part hydroponic nutrient solutions, that allow you to custom blend the amount of the different components, are recommended. But they might be costly. Organic hydroponic nutrients are available but they can be hard to find, and expensive.
Do not give your plants extra nutrients thinking it will make them grow faster. Too much will kill your plants. If you under fertilize, plants will take longer to grow but will not die. Follow the mixing instructions on your hydroponic nutrient package, if you aren't sure, use less rather than more.
As water evaporates and is absorbed by the plants, your water reservoir level will drop. Add tap water that has been aged 3 days or longer to the reservoir. If you have a reverse osmosis filter or use distilled water, they don't have to be aged. I don't add nutrient solution to the water when I top up the reservoir tank, some people do.
Change the nutrient solution every 2 weeks. That is, discard the old solution and rinse off the reservoir, pumps, and other equipment that is used with hot water. After cleaning, add tap water that has been aged 3 days or longer to the reservoir then add nutrient solution.
You only need to clean the cups and tubing the plants are in before you start a new crop. The old solution that you are discarding can be used to water house or garden plants. This will at least double the growth rate if you usually water your plants with regular tap water.
Dry Powder vs Liquid Nutrients
If you are buying nutrients, get the dry powder kind that you mix with water. They are much cheaper over the long run when you compare with already mixed liquid solutions.
Already mixed liquid solutions are just as good, but many are primarily water and a good portion of the price you pay is to cover shipping water that you can add at home for free. There are some concentrated solutions that may be cost effective but I've always saved money using dry powder nutrients.
If you are using a hydroponic system that uses a pump to circulate water you will have to make sure the powdered solution dissolves fully before adding it to the reservoir. This is because any undissolved nutrient crystals can ruin a pump.
The best way to dissolve dry nutrients is to put some water in a cup, add the nutrient powder and stir. When you are sure that the powder has been fully dissolved, you can add it to the nutrient reservoir.
If there are any undissolved crystals left in the bottom of the glass you can add some hot water then stir and let it sit for a few hours. After a few hours, stir them up again and add to the reservoir, if there are still undissolved crystals in the glass, you can throw them out.
Whatever you do, don't add any solids that might damage a pump into the nutrient reservoir. Don't use any nutrients not specifically designed for hydroponic systems, that is, don't try to use nutrients designed for growing in soil.
Stop all plant food at least 7 days before harvesting when growing in a hydroponic garden. The last time you change the water in your reservoir, don't add any nutrients. You can repeat this water only 'feeding' several times in the week prior to harvest. When growing in soil, stop all plant food at least 14 days before harvest.
This is so N-P-K and other elements can be removed from the plants before harvesting. This will insure that your weed is easy to ignite, doesn't taste like plant food, and you are ingesting a minimal amount of N-P-K or trace elements.
thats was a baller post :], indeed fucking expert, so if i wanted to i could use that for both of the stages,hahaha that was a good post
Fucking EXPERT!!!!!!kiss-ass
thats was a baller post :], indeed fucking expert, so if i wanted to i could use that for both of the stages,
that dont matter bro the thing is you took time to copy and paste it, people suck yo its good to have people to help you. So it was an EXPERT post niggah :}Lol, not really, that wasn't me writing the bulk of it, it was a copy and paste to explain it a little better than I thought I was doing on my own.
that dont matter bro the thing is you took time to copy and paste it, people suck yo its good to have people to help you. So it was an EXPERT post niggah :}
yes you are it says so under your name.Like I said, I'm not an expert, but you should use that fertilizer for your bloom stage and something like 10 5 5 or 20 10 10 (these are just examples) for veg.Good luck.
yes you are it says so under your name.
btw im useing 10-15-10 with a few other things for some plants that are growing 12/12 from seed... its working pretty well...
![]()
![]()
![]()