My first 3 chamber closet grow with Blueberry

TRICKKY

Well-Known Member
Thanks 9inchBB youve given me so much help & encouragement.

You know how growers cut off the lower 1/3 of the plant when lollipoping? Well I was wondering if it would help if I were to cut off the lower 1/4 of the plant so that all the bud production is concentrated on the higher branches were there is more light & lumens. Is this a good idea or am I over thinking it?
Hey!

I see things are coming on well. Been reading through and just had one thing to tip you on. If your gonna go flood and drain don't put the plants into the system until you have multiple roots growing out of your RW cubes.

Other than that it's looking groovy, How is Mamma Blueberry?

Oh and as for the lollipopping why not lollipop 2 and leave two as they are? It would be good experience for you ;-)
 

iloveit

Well-Known Member
Hey!

I see things are coming on well. Been reading through and just had one thing to tip you on. If your gonna go flood and drain don't put the plants into the system until you have multiple roots growing out of your RW cubes.

Other than that it's looking groovy, How is Mamma Blueberry?

Oh and as for the lollipopping why not lollipop 2 and leave two as they are? It would be good experience for you ;-)
Heeeeeeeey! nice to hear from you again :-P
This project has been alot of fun I have learnt so much from you & another fellow grower who goes by the name of "9inch big bud". The BB mother has grown BIG, its so high its touching the fluros & getting burnt Ill post pics in a little while...
 

iloveit

Well-Known Member
Tada!

Its not exactly in the best of conditions. Ive been trying to make it not grow in height so Ive been watering with plain water no nutes...Im not sure how that works but em eh:?. Last watered yesterday but the leaves are still drooping usually they pick up the next mourning. Im going to pluck out those old crinkled leaves tomorrow. Although I flushed the soil last week there are still yellow leaves to be found.
Im considering cutting off the leaves at the very top, its just getting burnt!

Those last pics are my "Mint" seedlings.

Does anyone know how I can upload pics from my photobucket account?
 

Attachments

iloveit

Well-Known Member
HOUSTON WE HAVE A PROBLEM!

SOMETHING IS WRONG WITH MY MOTHER PLANT. I watered a couple of days a go with only tap water with a PH of 6.5 (soil) today I found some of the leaves moist, wilting, crinkled (though still supple), dark green on the upper leaf & pale white on the under side. Also the branch thich but then becomes thin (see pic No. 6). What is this issue?
 

Attachments

9inch bigbud

Well-Known Member
HOUSTON WE HAVE A PROBLEM!

SOMETHING IS WRONG WITH MY MOTHER PLANT. I watered a couple of days a go with only tap water with a PH of 6.5 (soil) today I found some of the leaves moist, wilting, crinkled (though still supple), dark green on the upper leaf & pale white on the under side. Also the branch thich but then becomes thin (see pic No. 6). What is this issue?
looks like lack of light its at the bottom of the plant and that is a big plant. i get the dead wilt leaf when a branch is in contact with the side of the grow tent for afew days.

what the top of the plant look like?
 

iloveit

Well-Known Member
looks like lack of light its at the bottom of the plant and that is a big plant. i get the dead wilt leaf when a branch is in contact with the side of the grow tent for afew days.

what the top of the plant look like?

The higher leaves are curling at the tips but they are nice & perky unlike the previous photos.

The girls in the flowering are looking delicious. Pics coming up...
 

morrisgreenberg

Well-Known Member
it looks like she could use some trimming under there, also hows the air flow?, see how its happening to the larger fan leaves? clean them up down there and you and the plant will be happy
 

iloveit

Well-Known Member
looks like lack of light its at the bottom of the plant and that is a big plant. i get the dead wilt leaf when a branch is in contact with the side of the grow tent for afew days.

what the top of the plant look like?
Hear are pics taken of other part of the plant...
 

Attachments

iloveit

Well-Known Member
And todays pics of the flowering room.

I cant help getting excited over the smallest things like noticing roots sticking out from the drainage holes for the first time... I just had to post a pic.
 

Attachments

9inch bigbud

Well-Known Member
And todays pics of the flowering room.

I cant help getting excited over the smallest things like noticing roots sticking out from the drainage holes for the first time... I just had to post a pic.
looking very good have you strted to move your lights down now?
 

TRICKKY

Well-Known Member
Those clones are looking good.

I think mamma could probably use a good trim. When I keep a mother I top her at @ 3ft That way I don't have height issues and after a few weeks I get a lot of width to take cuttings from.

Again tho, all looks good :weed:
 

TRICKKY

Well-Known Member
I was wondering would I still need to move the bulb lower if the plants are growing taller closer towards the HPS?
I would aim for 12inches between the cooltube and the top of your plants, this will stop them stretching so much. Then, as they get taller move the light up so it is always within 12" of your plants.

You can get the cooltube even closer without having heat issues, but i find that the light doesn't get spread wide enough.
 

9inch bigbud

Well-Known Member
they are looking better and better every day 8-) the light Q as been answered for you by trickky. what you feeding them now grow or bloom?

p.s
[Are these hairs that are developing? /QUOTE]yes you bitches ar growing pubes LOL they look about right for 7 days flower
 

iloveit

Well-Known Member
they are looking better and better every day 8-) the light Q as been answered for you by trickky. what you feeding them now grow or bloom?

p.s
[Are these hairs that are developing? /QUOTE]yes you bitches ar growing pubes LOL they look about right for 7 days flower
Ha ha growing pubes! That gave me a little chuckle.

Im giving it Ionic Bloom @ 1000 PPM/PH @ 6.2/MS @ 1.5. Ive also given it Hygrozyme at the lowest dosage.

Ive lowered the HPS a little but Ill lowered it even more tomorrow if all is well.

Thank you uncle Trickky, Thank you uncle 9inchBB :eyesmoke:
 

iloveit

Well-Known Member
Got up today bright & early took a look at the babes this is what I found...check out those juicy stems. They wernt joking when they said cannabis grows faster in hydro :o

Yesterday night I found I had a few pin hole light leaks (in the flowering area only) at the very top of my cab, Ive covered it with alot of foil tape so I think its sorted but Ill find out for sure tonight. However I did find some swelling above some at the base of the fan leaves is this an indication of hermaphrodites? Eeeeek! (see pic No. 2 & 5)
 

Attachments

9inch bigbud

Well-Known Member
Got up today bright & early took a look at the babes this is what I found...check out those juicy stems. They wernt joking when they said cannabis grows faster in hydro :o

Yesterday night I found I had a few pin hole light leaks (in the flowering area only) at the very top of my cab, Ive covered it with alot of foil tape so I think its sorted but Ill find out for sure tonight. However I did find some swelling above some at the base of the fan leaves is this an indication of hermaphrodites? Eeeeek! (see pic No. 2 & 5)
your all right i dont think you have hemies LOL. get your light lower its in a cool tube now it can take more light.

p.s do you have another reflector? i took the silver reflector out of my cool tubes and put some of my old reflectors over the top of the cool tubes look at pic 1. i found the reflector in the cool tube is not that good if you dont have another reflector to use then have a go making one your self it can not be any worse than the one in the cool tube.

 
Top