winkdogg420
Well-Known Member
Here is a crude scetch of my idea for the speaker ! I think CUTTNG THE BACK IS THE WAY TO GO! TAKE OUT THE WOOFERS AND COVER THE HOLES WITH BLACK PLASTIC
what do u think of my micro grow? (pics)
- Thread starter nathan76296
- Start date
nathan76296
Well-Known Member
Hmmm.... okay I will take a picture of the back of the speaker later to show you how it looks... I might be able to just pry it off and just add some small hinges to make this alot easier. I think its glued on, becus when I took out the speaker I saw the glue on the sides. This is where I was planning to cut it at tho, red lines = the door, blue square = hinge
winkdogg420
Well-Known Member
OK i think the back it a better idea but cutting the front would be cool too so you dont have to turn them around , just pop the grates off! If you are gonna do the backs take out the speaker cut through as much ot the glue as possible from the back of the box and just knock the whole back out with a hammer/your foot ...
.
nathan76296
Well-Known Member
So which one back or front?? I would actually cut the hole smaller becus one fan would be on the very top speaker and another one would be at the very bottom, so the cut would be in between the top and bottom speakers
winkdogg420
Well-Known Member
Sounds good cant wait to see the boxes done!
dogglet forever
Well-Known Member
my friend made this a couple of weeks ago... its 8 inch concrete tube which is moisture resistant, two 8 inch empty wire spools, and a computer fan... i had a clone in there for a couple of weeks to flower but my timer didnt work... the whole thing needs some tweeking but if i lived in dorm or apartment i would look into this further.
Attachments
winkdogg420
Well-Known Member
man i was thinking of doing this in a peice of metal duct! just one bulb and one nug! real tight light concentration! great idea i would love to see a full grow in one!
dogglet forever
Well-Known Member
i'm trying too find some one to do it, between my job, working out, my perp grow, brewing, and girlfriend, i have plenty to do already.... i originally wanted to raise males in it to collect pollen so i could start some hybrids... but i have been having some bad luck with hermies w/ my plants from seed... my clones do okay though?
but if the tube were shorter you could do a lowrider for sure
but if the tube were shorter you could do a lowrider for sure
Attachments
Your micro grow looks great. It reminds me of mine. Tying down branches and/or LST is a must with this method. One of my tops grew into my CFL's and burnt itself.
What type of reflecting material is that you used and where did you get it? I had to use foil for mine which is very inefficient and I'd like to replace it.
What type of reflecting material is that you used and where did you get it? I had to use foil for mine which is very inefficient and I'd like to replace it.
Attachments
SlickRickMcgee
Well-Known Member
That looks really stealthy. Are you going to use the fan that came inside the PC?
How long did it take you to get the Nirvana shipment?
How long did it take you to get the Nirvana shipment?
nathan76296
Well-Known Member
I used a car windshield reflector I bought at walmart...it works GREAT the temps never get to high. I'm goign to get some mylar for the speakers tho. You can get it at like the Family Dollar, or Dollar General. It's that silver wrapping paper you buy.
I made a guide on how I did it here..
https://www.rollitup.org/do-yourself/143548-cfl-light-reflector-not-tin.html
nathan76296
Well-Known Member
UPDATE****
Got the supplies for getting the speaker case ready! I just need to get the Mylar, which will be soon, and need a Mongul socket adapter for the light... I've been to Home Depo, Lowes, and Ace Hardware with no luck of finding a Mongul adapter. There is a couple electric stores im going to hit up tommarrow. I also got some germinating soil, cus I haven't been able to get mine to sprout yet so hopefully this will help. Check back in for pictures when im done
!
oh yeah and I got some LED lights to put on the sides.
Got the supplies for getting the speaker case ready! I just need to get the Mylar, which will be soon, and need a Mongul socket adapter for the light... I've been to Home Depo, Lowes, and Ace Hardware with no luck of finding a Mongul adapter. There is a couple electric stores im going to hit up tommarrow. I also got some germinating soil, cus I haven't been able to get mine to sprout yet so hopefully this will help. Check back in for pictures when im done
!oh yeah and I got some LED lights to put on the sides.
Attachments
nathan76296
Well-Known Member
Yeah I think... Blue for VEG and red for Flower. But im just putting these on the sides, i have a 200 watt light I'm using for the main light.
Attachments
nathan76296
Well-Known Member
Fuck I can't get the back off... how the hell do I do it lol? There is no screws its all glue