Show us your home made bong

cannabiscrusader

Well-Known Member
View attachment 5275089

top, nearest pic i can find to it, the underneath pic is the bottle it was made from. i used a diamond core drill to make the hole in the raised and oval name plate. we used to use a dart to chip a hole in it, but many a bottle was broken if you wern't carefull and patient. we used a length of copper pipe for cold water, 15mm bore and used a push down ground coffee maker fine mesh disk to cut small mesh disks out of to bung down the pipe. it was held in by blue or white tack, depending on what was around. but the police took itView attachment 5275095

View attachment 5275096

next time im useing my ultrasonic drill to make life simpler.View attachment 5275098images (6).jpeg
 

Drop That Sound

Well-Known Member
So I have a uranium glass "vase" that has the stem hole pre drilled... where do I go from here? I assume I should get some grommets but what is the BEST way to go I dont care MUCH about cost.

Turn any glass bottle into a bong under 5 minutes with our kit
Repurposing one bottle at a time for a better environment for planet earth
 

meangreengrowinmachine

Well-Known Member

Turn any glass bottle into a bong under 5 minutes with our kit
Repurposing one bottle at a time for a better environment for planet earth
Thats funny.. this is exactly the site I landed on... I dont NEED the drill bit but hmmmmmmm why not have one! Thanks!!
 

meangreengrowinmachine

Well-Known Member

Drop That Sound

Well-Known Member
If you could get someone to do it that would be so rad! A full on uranium glass bong (except for the the actual bowl section?) that sets off a geiger counter and reacts to UV black lights... cool!

I have no glass blowing skills, but yeah re-melting it down sounds like the way to go, instead of trying to source "urynal nitrate" or whatever other ingredients needed. Looks tricky to get it right from the video I watched earlier. Maybe you might get lucky and find a pre made uranium glass tube that is about the right size..
 

meangreengrowinmachine

Well-Known Member
If you could get someone to do it that would be so rad! A full on uranium glass bong (except for the the actual bowl section?) that sets off a geiger counter and reacts to UV black lights... cool!

I have no glass blowing skills, but yeah re-melting it down sounds like the way to go, instead of trying to source "urynal nitrate" or whatever other ingredients needed. Looks tricky to get it right from the video I watched earlier. Maybe you might get lucky and find a pre made uranium glass tube that is about the right size..
sounds like my contact has worked with it before! fingers crossed!!
 

meangreengrowinmachine

Well-Known Member
Well I managed to score these, not actual uranium glass but very cool none the less!
I did find a person that blows uranium glass on Instagram but I think his pieces are crazy expensive.
 

Attachments

Top