Just a "Heads up" for Meijiu 650watt F8+ users and prospective buyers.

I amTHE...GanjaFarmer

I amTHE...GanjaFarmer

Member
So I run these Chinese made Meijiu lights in my flower tents. I currently have four of them lighting two 10x10 tents. Been about two years since I first plugged them in and have had great results. Big fat dense potent terpy colas. I yield around 20-30 ounces per light per cycle. No complaints there.

Here's the problem...

First time it happened was about a year ago. Smoke filled the flower tent! Now thank God I check down there regularly because the exhaust was just pumping the smoke out and literally fueling the fire.

Come to find out it was a bad connector. These connectors are used to connect the Inventronics drivers to the light bars so the driver could be shipped separate. It had melted and begun to catch fire. Again, Thank The Good Lord I got down there in time!

I didn't think much of it other than hopefully it was just a fluke and a shorted wire or something. I have a few spare lights so I just set another one up and put the burnt one to the side.

A few months ago I decided to tinker with the light and see if I could get it to shine again. So I opened it up and checked it all out. Looked all good except that burnt connector so I just cut out the connector and bypassed it completely. Light works like a charm every since.

Yesterday another one did the exact same thing. Started smoking began to catch fire and spark...I smelled burning plastic coming from down there and caught it before it got bad.

I wrote the sales lady who originally sold me the lights and told her of the problem. She acted like she didn't understand basic English all of the sudden...lol

So I know customer service wont help or even hear my complaints...

Now I know there will be some shit about buying Chinese lights or whatever but it is what it is. I made the investment. It paid off even with the burnt connectors. Same thing could happen with any light I suppose.

I promptly cut out all the connectors from the remaining lights and bypassed them before they melt down as well. I suggest if you own these lights or are thinking of buying them you do the same.

IMG_0835.JPGIMG_0774.JPG
 
bk78

bk78

Well-Known Member
I amTHE...GanjaFarmer said:
So I run these Chinese made Meijiu lights in my flower tents. I currently have four of them lighting two 10x10 tents. Been about two years since I first plugged them in and have had great results. Big fat dense potent terpy colas. I yield around 20-30 ounces per light per cycle. No complaints there.

Here's the problem...

First time it happened was about a year ago. Smoke filled the flower tent! Now thank God I check down there regularly because the exhaust was just pumping the smoke out and literally fueling the fire.

Come to find out it was a bad connector. These connectors are used to connect the Inventronics drivers to the light bars so the driver could be shipped separate. It had melted and begun to catch fire. Again, Thank The Good Lord I got down there in time!

I didn't think much of it other than hopefully it was just a fluke and a shorted wire or something. I have a few spare lights so I just set another one up and put the burnt one to the side.

A few months ago I decided to tinker with the light and see if I could get it to shine again. So I opened it up and checked it all out. Looked all good except that burnt connector so I just cut out the connector and bypassed it completely. Light works like a charm every since.

Yesterday another one did the exact same thing. Started smoking began to catch fire and spark...I smelled burning plastic coming from down there and caught it before it got bad.

I wrote the sales lady who originally sold me the lights and told her of the problem. She acted like she didn't understand basic English all of the sudden...lol

So I know customer service wont help or even hear my complaints...

Now I know there will be some shit about buying Chinese lights or whatever but it is what it is. I made the investment. It paid off even with the burnt connectors. Same thing could happen with any light I suppose.

I promptly cut out all the connectors from the remaining lights and bypassed them before they melt down as well. I suggest if you own these lights or are thinking of buying them you do the same.

View attachment 5108840View attachment 5108841
Click to expand...
These are the same connectors used on 99% of any horticulture light now, sounds like it wasn’t fully screwed together to me and it shorted out
 
I amTHE...GanjaFarmer

I amTHE...GanjaFarmer

Member
bk78 said:
These are the same connectors used on 99% of any horticulture light now, sounds like it wasn’t fully screwed together to me and it shorted out
Click to expand...
I thought that when the first one fried so I made sure all the others were as tight as possible. They still fried. Took years. IF they were loose wouldn't they have shorted sooner?
 
I amTHE...GanjaFarmer

I amTHE...GanjaFarmer

Member
bk78 said:
Fan moving the lights ever so slightly day in and day out could possibly loosen them over time?
Click to expand...
Hmm...I never thought about vibration and such. Could have loosened them over time to be sure. Thank you for the insight!

The only way they will loosen now is if wire nuts and electric tape don't stop it.

Kinda makes sense because I use BIG fans and the whole house vibrates because of it.

So it would probably have been a good idea to check them regularly and retighten them if needed.

That could for sure have been it... I guess.
 
bk78

bk78

Well-Known Member
I amTHE...GanjaFarmer said:
Hmm...I never thought about vibration and such. Could have loosened them over time to be sure. Thank you for the insight!

The only way they will loosen now is if wire nuts and electric tape don't stop it.

Kinda makes sense because I use BIG fans and the whole house vibrates because of it.

So it would probably have been a good idea to check them regularly and retighten them if needed.

That could for sure have been it... I guess.
Click to expand...
It likely would’ve shorted out and tripped the breaker before any fire started. Good on you posting this though because even every American made (assembled in USA) light run these connections. And people need to check theirs
 
Rocket Soul

Rocket Soul

Well-Known Member
I was looking at these ali connectors but now in know better. Theyre abor 5€ here from a decent shop so no biggy. In my years of diying ive had one alibaba wago burn on me only, with about 240w going
thru it, but thats it.
Kudos to OP for the info and: diy it and make sure that each string dont have to carry too much wattage!
 
Last edited:
D

Diddy147

Well-Known Member
From an electricians point of view a dead short is much better than a loose connection. The loose connection arcs and that creates heat which we don't want. A dead short on the other hand blows the fuse/trips the breaker and damage is prevented. Good call to check your connections.
Sometimes a little slack loop on the cable strategically placed is better to absorb vibration than a neat straight connection. Maybe just check before each grow cycle just to keep safe.
 
furbolg

furbolg

Well-Known Member
those don't look like any connectors i've seen the ones i've seen look like this


these ones look kind of cool

CESFONJER Junction Box Outdoor Waterproof IP68 3 - Way Line M25 Cable Connector Wire Range 5-10mm Power Cord External Sleeve Coupler Protection Box (5 PCS): Amazon.com: Tools & Home Improvement

CESFONJER Junction Box Outdoor Waterproof IP68 3 - Way Line M25 Cable Connector Wire Range 5-10mm Power Cord External Sleeve Coupler Protection Box (5 PCS): Amazon.com: Tools & Home Improvement
www.amazon.com
 
Fardsnarp

Fardsnarp

Well-Known Member
PadawanWarrior said:
Maybe it's a good idea to buy quality products to begin with, :bigjoint:.
Click to expand...
I made my living fixing good name brand products under warranty. I doubt many of the folks making grow lights have full end to end audit capability of their supply chain. Price doesn't guarantee quailty. It does help them stand behind failed product better because that is built into the margin.
 
dynospec

dynospec

Well-Known Member
Do the quantum board connectors share a similar potential issue? I went and checked mine out, I have one of the very common aluminum heatsink 240w quantum boards.

I checked all the connections just in case, I would not be able to replace my lights right away, and I also have pets that I can not replace at all
 
furbolg

furbolg

Well-Known Member
you can buy wagos at crown ace hardware I would just use those. If you want it to be waterproof I would put wagos inside a water proof junction box.
 
You must log in or register to reply here.
Top