What did you accomplish today?

[MICHI-CAN]

Now I want a 3D printer for loom parts.

@MICHI-CAN
Hey one thing i don’t think that post in the older thread addresses is that chlorine dissipates pretty quick. We keep adding pool shock(i only have experience with calcium hypochlorite) to keep the levels up.

Thanks. Just trying to compare old and new. I'm dirt forever. But always curious what is going on over the mountain.

 

[Aeroknow]

this is the third shipping container i’ve done up. The other two were for someone else's grows. They came out bad ass. This one is for my dry room and future grow too maybe lol. I’m only doing up 24’(finish) of this 40’ high cube because who knows, maybe i’ll put three trays along with 6-750w DE setups down the road. Plus, it fucking rains in these bitches because of condensate.
Insulated, framed and rocked the lid. Almost ready to finish the rest. I just took some hits a couple hours ago. On top of all the beer I drank i’m kinda feeling done for the day.


All 20ga, not that tincan crap you get at home depot. We don’t ever use that shit on the job. I would have framed with 3-5/8“ studs, instead of furring with these 1-5/8” studs on top of 2” foamboard, and then insulated with a rockwool type batt made for metal stud framing but I sware to god no one has it in stock all the way down to Sac and they all say it will take forever because of this virus bullshit. Hey, an R-13 aint bad with a closed cell foam board insulation. Still cheaper than me spray foaming it.
I gotta get all this nickle dime bullshit out the way because of the house.

 

[Aeroknow]

Thanks. Just trying to compare old and new. I'm dirt forever. But always curious what is going on over the mountain.

I am hydro background. But i grow in soil these days with nutes. Go figure. Outdoor we usually keep it organic with topdressing and teas

 

[DustyDuke]

this is the third shipping container i’ve done up. The other two were for someone else's grows. They came out bad ass. This one is for my dry room and future grow too maybe lol. I’m only doing up 24’(finish) of this 40’ high cube because who knows, maybe i’ll put three trays along with 6-750w DE setups down the road. Plus, it fucking rains in these bitches because of condensate.
Insulated, framed and rocked the lid. Almost ready to finish the rest. I just took some hits a couple hours ago. On top of all the beer I drank i’m kinda feeling done for the day.
View attachment 4529861
View attachment 4529862
All 20ga, not that tincan crap you get at home depot. We don’t ever use that shit on the job. I would have framed with 3-5/8“ studs, instead of furring with these 1-5/8” studs on top of 2” foamboard, and then insulated with a rockwool type batt made for metal stud framing but I sware to god no one has it in stock all the way down to Sac and they all say it will take forever because of this virus bullshit. Hey, an R-13 aint bad with a closed cell foam board insulation. Still cheaper than me spray foaming it.
I gotta get all this nickle dime bullshit out the way because of the house.

The foam boards was most were perfect height bro. I hate that shit when I’m bricking up a job and fixing ties to the frame I have to use a hole saw to cut a hole for the tie. Then screw the tie on, glue the foam back to the frame and tape it. Good times

 

[Aeroknow]

Here’s the first cycle indoor just 10 min ago. Green lamp on my head so dont give me no jibber jabber please about the shitty pics. I’ll take some of them outdoors in a few weeks before I chop and take some good pics if anyone’s interested. And please don’t tell me i need some Ca and some Mg lol. I am still dialing in my 8.0 ph well water. i’ll figure it out
46 days in. I take down the cake @10, the dolato prob at 9.5 weeks.
3 trays of cake

1 tray of dolato

about a pound?

 

[Aeroknow]

The foam boards was most were perfect height bro. I hate that shit when I’m bricking up a job and fixing ties to the frame I have to use a hole saw to cut a hole for the tie. Then screw the tie on, glue the foam back to the frame and tape it. Good times

Only prob with using them in this “high cube” is it’s a little taller than 8’ inside. No biggie, just had to add some rips.

 

[Aeroknow]

Holy shit! Look at me. Chatty Cathy all of a sudden!

 

[lokie]

Now I want a 3D printer for loom parts.

I was thinking of the handy utensils used for LST.

Limb clamps.

And Anchor stakes to tie down the clamps.

These and other unique patterns are available here

"nipple clamp" 3D Models to Print - yeggi

10000+ "nipple clamp" printable 3D Models. Every Day new 3D Models from all over the World. Click to find the best Results for nipple clamp Models for your 3D Printer.

tinyurl.com

 

[Aeroknow]

Last pic I sware to god! I really do only have about a day left on the tractor getting the shit ready to bust out the forms for new home. they’re gonna lag approving the permits and I don’t wanna get too far ahead of the process. Cause you never know.

 

[raratt]

Last pic I sware to god! I really do only have about a day left on the tractor getting the shit ready to bust out the forms for new home. they’re gonna lag approving the permits and I don’t wanna get too far ahead of the process. Cause you never know.
View attachment 4529876

You even have a tree for a little shade.

 

[Aeroknow]

You even have a tree for a little shade.

Unfortunately bro, these eucalyptus trees are on the west side of the trailer. Had to put trailer there because of the septic straight up southern and eastern exposure for most of the day. Middle of summer the two ac’s hardly keep up.
Last pic I lied

 

[lokie]

this is the third shipping container i’ve done up. The other two were for someone else's grows. They came out bad ass. This one is for my dry room and future grow too maybe lol. I’m only doing up 24’(finish) of this 40’ high cube because who knows, maybe i’ll put three trays along with 6-750w DE setups down the road. Plus, it fucking rains in these bitches because of condensate.
Insulated, framed and rocked the lid. Almost ready to finish the rest. I just took some hits a couple hours ago. On top of all the beer I drank i’m kinda feeling done for the day.
View attachment 4529861
View attachment 4529862
All 20ga, not that tincan crap you get at home depot. We don’t ever use that shit on the job. I would have framed with 3-5/8“ studs, instead of furring with these 1-5/8” studs on top of 2” foamboard, and then insulated with a rockwool type batt made for metal stud framing but I sware to god no one has it in stock all the way down to Sac and they all say it will take forever because of this virus bullshit. Hey, an R-13 aint bad with a closed cell foam board insulation. Still cheaper than me spray foaming it.
I gotta get all this nickle dime bullshit out the way because of the house.

I like this.

The container home can be configured in many ways.

I could see living in 1/2 and gardening in the other.

 

[cannabineer]

I like this.

The container home can be configured in many ways.

I could see living in 1/2 and gardening in the other.

Those just look Frank Lloyd Wrong

 

[Aeroknow]

I like this.

The container home can be configured in many ways.

I could see living in 1/2 and gardening in the other.

Nah. It’s cool but i’d rather just frame up a house lol.

there’s an episode on building off the grid where a real estate agent? I think.Built a home out of them things and the dude straight up cried because he was overwhelmed. On tv! Lmao

 

[Grandpapy]

Unfortunately bro, these eucalyptus trees are on the west side of the trailer. Had to put trailer there because of the septic straight up southern and eastern exposure for most of the day. Middle of summer the two ac’s hardly keep up.
Last pic I lied
View attachment 4529878

I know you can grow trees. Make us feel sorry for you..

 

[tyler.durden]

Here’s the first cycle indoor just 10 min ago. Green lamp on my head so dont give me no jibber jabber please about the shitty pics. I’ll take some of them outdoors in a few weeks before I chop and take some good pics if anyone’s interested. And please don’t tell me i need some Ca and some Mg lol. I am still dialing in my 8.0 ph well water. i’ll figure it out
46 days in. I take down the cake @10, the dolato prob at 9.5 weeks.
3 trays of cake
View attachment 4529868
1 tray of dolato
View attachment 4529867
about a pound?

Fuck! I can't see the forest for your trees! So nice, bro. HE'S BAAACCK!

 

[tyler.durden]

Finally weeded out the front yard flower bed. Also tilled in some alfalfa pellets. Moved the mint plants to where the weeds usually pop up in various places around the lawn in hopes that the mint will out compete the weeds. I did the same thing in the backyard. Mowed the back lawn reel quick with the reel mower my mother-in-law let me have because “it’s too hard to push”. I just raised the blade an inch and lubricated all the working parts. Smooth like butter.

 

[Aeroknow]

I know you can grow trees. Make us feel sorry for you..

I don’t even want trees bro. I’ll plant some italian cypress for fencing or something but trees are bad bro. They’ll kill you! Too many trees you burn down. I used to love living among them. Fuck that shit now!

 

[Aeroknow]

Fuck! I can't see the forest for your trees! So nice, bro. HE'S BAAACCK!

.
thanks bro.

 

[ismann]

2 puffs ripped my face off. Mission accomplished.