Moflow
Well-Known Member
That's the drivers you need
Is this light any good for 240cm x 120cm x 200cm
Do I need 2 or is this all I need
Aluminium u channel 1200mm x10
Aluminium unequal 2450mm ( basically 8ft) x2
10 strips and 1 driver or 2 ?
Moflow
Well-Known Member
You need 2 drivers.
The strips are 38.9mm wide so c channel of 1 and 3/4" = 44mm will do.
Now double check and measure the 4’x4′ space, you may not quite be able to fit 4’ strips – even though these strips are not actually a full 48” long, they may be a tight fit by the time you incorporate your frame (if you’re growing in a tent) so be sure to measure your space to ensure they’ll fit first!
If it dont fit you can use 2ft f strip build instead.
The strips are 38.9mm wide so c channel of 1 and 3/4" = 44mm will do.
Now double check and measure the 4’x4′ space, you may not quite be able to fit 4’ strips – even though these strips are not actually a full 48” long, they may be a tight fit by the time you incorporate your frame (if you’re growing in a tent) so be sure to measure your space to ensure they’ll fit first!
If it dont fit you can use 2ft f strip build instead.
Thankyou very much for all of your help o really really appreciate it when my tent arrives I’m gonna to measure everything correctly first and make my adjustments, what sort of gram per watt could I expect with the 10 bars and 2 480h drivers ?
Moflow
Well-Known Member
I don't do grams per watt. I grow in the cold in soil so my yields are poorish in winter, good in summer.
My mate does hydro with CO2 and gets ~ 30 O's per 4 x 4 per HLG550 in his 4 x 8, so 60 O's. That'd be around a gram per watt.
I'd expect ~ a gram per watt but depends on you dialling in your grow, good heavy yeilder and correct temperatures and air circulation. Good temps around 28 - 29°C
Some say they get 1.5 - 2 grams per watt but reminds me of fishermen sayn it was that big! Lol lol