EmeraldØsiris
Well-Known Member
Attachments
-
2.6 MB Views: 2
Can’t wait to get mine setup! Just got my new room wired up with 240v. I think I’ll be making 4 sets of 3 board setups, framing them with some aluminum angle iron. Should be easy I’m hoping lol.
Wow why the hell does that board hang off the edges so damned much? Whoa.
You won't be dissapointed.Can’t wait to get mine setup! Just got my new room wired up with 240v. I think I’ll be making 4 sets of 3 board setups, framing them with some aluminum angle iron. Should be easy I’m hoping lol.
Fortunately when I tested the boards temps the edges of the boards were cooler than the center. I think they've just saved money on min heatsink they could get away with.Wow why the hell does that board hang off the edges so damned much? Whoa.
How hard are you running the board?They do get hot on full blast, but some fans will help cool them. The driver gets hot too.
I got it full blast 12 on 12 off. Why?How hard are you running the board?
When I talked to them they said that the heatsinks worked so why add more? Trust me I said the same thing lol.Wow why the hell does that board hang off the edges so damned much? Whoa.
If you were at 1000-1200 pods, you're shit would be all fucked up by now without Co2. There's no way in hell you're that high. Maybe in a few spots here and there, but not average.What is your experience as far as hang distance? At 15-20 inches I'm getting about 70,000 lux, which apparently translates to 1000-1200 ppfd
Day 12:
View attachment 4310123 View attachment 4310124
I hit mine with 800-1200ppfd depending on the height. I wouldn't trust a conversion. Try getting the hydrofarm par meter it works as well as the others from my testing. Last I checked it's only $100So this calculator is basically useless?
https://www.waveformlighting.com/horticulture/convert-lux-to-ppfd-online-calculator
Would be good if you vould comment on your hang height experiences...
I've 2 boards running at 300 watts , ~ 150 w a board and I get around 900 umols / m2/s at around 10" - 12" with Apogee 500 par meter.What is your experience as far as hang distance? At 15-20 inches I'm getting about 70,000 lux, which apparently translates to 1000-1200 ppfd
Day 12:
View attachment 4310123 View attachment 4310124
We got about the same, 900ish with the boards about 5 inches apart, 150w per boardI've 2 boards running at 300 watts , ~ 150 w a board and I get around 900 umols / m2/s at around 10" - 12" with Apogee 500 par meter.
You couldn't get an hlg550 that close to plants...... lolWe got about the same, 900ish with the boards about 5 inches apart, 150w per board