Need help

[Skeeter4200]

I have my carbon ran to my hood, which then is ran up to my inline fan,,then to the outside.. My inline fan I have now pulls plenty of air circulation in the tent

 

[Skeeter4200]

Something doesn't add up here? Three inline fans for a tent? One fan connected to the cool tube (no contact with stinky air). One fan to exhaust heat and to pull in fresh air with carbon filter attached. What is the third on for?

What are you're thoughts Coloradoclear?

 

[Joe.Grow]

Can you leave the zipper open a little near the top? If you let the pressure between them exchange it will cool better too.

 

[Skeeter4200]

Can you leave the zipper open a little near the top? If you let the pressure between them exchange it will cool better too.

Actually I was able to get it down pretty good by opening the vents,, I'm sorry Cx2H my 1 vent I had taped over,, the suction part is solved,,, Thanks a bunch Cx2H,, now to deal with the heat from my 1000w hps

 

[Skeeter4200]

I tend not too because I'm always in here even when they're sleeping,, so I have lights on

Actually I was able to get it down pretty good by opening the vents,, I'm sorry Cx2H my 1 vent I had taped over,, the suction part is solved,,, Thanks a bunch Cx2H,, now to deal with the heat from my 1000w hps

 

[Skeeter4200]

Something doesn't add up here? Three inline fans for a tent? One fan connected to the cool tube (no contact with stinky air). One fan to exhaust heat and to pull in fresh air with carbon filter attached. What is the third on for?

What would I connect the cool tube to or how would I put it,, without getting stinky air in the exhaust?

 

[Bernie420]

Im so confused about what your doing I just had to tell you.

It should be carbon filter > fan > ducting > light > ducting going outside. Brace up the walls with pvc pipe to help stop the sucking in of the walls if possible.
Theres a whole section here about growroom design and about a million youtube videos on this subject.

 

[Skeeter4200]

Im so confused about what your doing I just had to tell you.

It should be carbon filter > fan > ducting > light > ducting going outside. Brace up the walls with pvc pipe to help stop the sucking in of the walls if possible.
Theres a whole section here about growroom design and about a million youtube videos on this subject.

That's sorta how I ran it,, filter,, ducting,, hood,,,ducting,, fan,, to outside,, but I opened up the bottom vents,, which helped with the excessive pull from the inline van,

 

[Skeeter4200]

This rip I'm running,, Bc pinewarp,, BC Bubba God,, og white fire,, ak white fire...

 

[Bernie420]

That's sorta how I ran it,, filter,, ducting,, hood,,,ducting,, fan,, to outside,, but I opened up the bottom vents,, which helped with the excessive pull from the inline van,

filter,, ducting,, hood,,,ducting,, fan,, to outside, = which means if you have a air leak you are sucking stinky air outside the tent or dwelling. And you are pulling the hottest air possible over your fans components.

Is the filter and fan in the tent which in my mind it is cuz you want to exhaust the heat and stink out of the tent.

I dont think you need three fans to pull this off. One hooked to filter and lights and a small regular fan blowing the leaves around should be enough.

 

[Skeeter4200]

filter,, ducting,, hood,,,ducting,, fan,, to outside, = which means if you have a air leak you are sucking stinky air outside the tent or dwelling. And you are pulling the hottest air possible over your fans components.

Is the filter and fan in the tent which in my mind it is cuz you want to exhaust the heat and stink out of the tent.

I dont think you need three fans to pull this off. One hooked to filter and lights and a small regular fan blowing the leaves around should be enough.

That's how I got it,, one fan hooked to filter & light,, & 1 oscillating fan to blow the leaves around,, the problem was,, my inline fan was creating to much suction on my tent,, to where I was losing 7-8 inches of space

 

[Skeeter4200]

my friend i am chinese and know very many tings, you have ever heard of FULL SPECTRUM LED? i thinking u should give it shot trying viparspectra they very good company and is alot cooler than hid and saving lotta money too on elec bill you should give a shot

Yes I've heard of full spectrum light,, just afraid to purchase the cheap ones I've read a lot and it says the cheap ones are all junk

 

[Bernie420]

That's how I got it,, one fan hooked to filter & light,, & 1 oscillating fan to blow the leaves around,, the problem was,, my inline fan was creating to much suction on my tent,, to where I was losing 7-8 inches of space

Right on you did understand about my post and the possibility of it sucking stinky unfiltered air if you dont have it sealed of tight.

Cant you brace it up so it doesnt suck in as much or crack a vent flap open or a zipper and if your worried about the light leaking in or out couldnt you hang a dark towel or something to let air in and keep the light from showing, idk. To me one of the main reasons to grow in a tent is that you dont want the light blasting in the room all the time other than that I dont see much use for it.

 

[Skeeter4200]

Right on you did understand about my post and the possibility of it sucking stinky unfiltered air if you dont have it sealed of tight.

Cant you brace it up so it doesnt suck in as much or crack a vent flap open or a zipper and if your worried about the light leaking in or out couldnt you hang a dark towel or something to let air in and keep the light from showing, idk. To me one of the main reasons to grow in a tent is that you dont want the light blasting in the room all the time other than that I dont see much use for it.

Yes I saw the post hopefully I got everything sealed tight enough

 

[Skeeter4200]

Right on you did understand about my post and the possibility of it sucking stinky unfiltered air if you dont have it sealed of tight.

Cant you brace it up so it doesnt suck in as much or crack a vent flap open or a zipper and if your worried about the light leaking in or out couldnt you hang a dark towel or something to let air in and keep the light from showing, idk. To me one of the main reasons to grow in a tent is that you dont want the light blasting in the room all the time other than that I dont see much use for it.

I opened the back bottom vent & put that towards the wall,, it helped out a bunch with the suction, & I shouldn't get any light coming thru, I grow in a tent because I don't have room to build a grow in,, otherwise I'd jam one.. It's 55x55x76,, I also have heat issue during summer time,, I run a 1000w,, wondering if I should down grade to a 600w ???

 

[Bernie420]

I opened the back bottom vent & put that towards the wall,, it helped out a bunch with the suction, & I shouldn't get any light coming thru, I grow in a tent because I don't have room to build a grow in,, otherwise I'd jam one.. It's 55x55x76,, I also have heat issue during summer time,, I run a 1000w,, wondering if I should down grade to a 600w ???

cool

cant comment on the light change it would be less heat but would it be enough idk.

 

[Skeeter4200]

cool

cant comment on the light change it would be less heat but would it be enough idk.

Thanks man appreciate the help..

 

[Skeeter4200]

cool

cant comment on the light change it would be less heat but would it be enough idk.

Also I'm not sure of it myself,, I always here about people switching a 1000w for 2 600w which they can't run that cool?

 

[Cx2H]

Also I'm not sure of it myself,, I always here about people switching a 1000w for 2 600w which they can't run that cool?

Honestly it is gonna be hard to keep heat under control unless the room the tent is in is cold and you have good air exchange, run day cycle at night. Even then that 1000w lamp puts out a alot of radiation.

 

[Skeeter4200]

Honestly it is gonna be hard to keep heat under control unless the room the tent is in is cold and you have good air exchange, run day cycle at night. Even then that 1000w lamp puts out a alot of radiation.

I tried that also running it at night,, yield seemed to be smaller,, than running during the day,, then dark with regular dark outside,, because then I was able to bring in cooler fresh air running it during the day hot/cold opposed to running it at night it would be hot/ hot in the warmer months