Appreciate all the input. You covered the bases and well. Want to clarify Im not coming down on the light or the seller. Im saying a 320 watt quantum board light should flower a 4 x 4 tent just fine especially when in the hands of an experienced grower.Quantums are like the Lego blocks of DIY ...
Dual QBs will kill in a 2x2 ...... 4 panels ( depending on driver choice ) can push up to 600watts - and flower up to a 5x5 nicely. The beauty of these is that you can keep upgrading your system one or two boards at a time or reconfigure for something smaller.
I run a 4 panel QB with COBS in a 3x3 .... No issues ... Dimmable. It has plenty of watts to mash the pedal on ( if needed ) and can be pulled and re-hung from a ceiling for a larger space ... With zero effort plus already the extra watts to use.
View attachment 4154327
I built another that is a 3 panel ( wing ) that hits at 320w and was used in a 42" X 30 X 60 tent.
View attachment 4154330
Then a 3 panel Mixed ( 3000k / 4000k ) ceiling mounted " corner desktop " grow space .
View attachment 4154329
You will never really out grow these lights as they are constantly running the latest BIN.
I am running the original S5 bin in the quad and am still harvesting great smoke. Hand down the easiest way to build many different variations.
And you can build a single board grow like these .....
4000k supplemental / seedling board mounted on tripod. ( old camera tripod )
View attachment 4154331
Single QB 304 in a modified MARS HYDRO PANEL ( gutted and new driver ) ...
View attachment 4154332
HLG does not hardsell you ... It's the growers like myself and many others that do word of mouth and grow sharing. Plus their is no better customer service @robincnn and @Stephenj37826
They sell out pretty fast and there is a reason for that .... Peace.
Beautiful...Been following along your grows since you switched to QB ... Looking good .
No worries about that stem break , now you know if stem is feeling stiff and " woody " it might break. Look into LST on your next runs , easy way to shape plants ...
Keep us posted ..
You should be a salesman, if I didn't have one, I would get one immediately!!! And your house has to be HUGE!!! How do you have room for all that stuff???Quantums are like the Lego blocks of DIY ...
Dual QBs will kill in a 2x2 ...... 4 panels ( depending on driver choice ) can push up to 600watts - and flower up to a 5x5 nicely. The beauty of these is that you can keep upgrading your system one or two boards at a time or reconfigure for something smaller.
I run a 4 panel QB with COBS in a 3x3 .... No issues ... Dimmable. It has plenty of watts to mash the pedal on ( if needed ) and can be pulled and re-hung from a ceiling for a larger space ... With zero effort plus already the extra watts to use.
View attachment 4154327
I built another that is a 3 panel ( wing ) that hits at 320w and was used in a 42" X 30 X 60 tent.
View attachment 4154330
Then a 3 panel Mixed ( 3000k / 4000k ) ceiling mounted " corner desktop " grow space .
View attachment 4154329
You will never really out grow these lights as they are constantly running the latest BIN.
I am running the original S5 bin in the quad and am still harvesting great smoke. Hand down the easiest way to build many different variations.
And you can build a single board grow like these .....
4000k supplemental / seedling board mounted on tripod. ( old camera tripod )
View attachment 4154331
Single QB 304 in a modified MARS HYDRO PANEL ( gutted and new driver ) ...
View attachment 4154332
HLG does not hardsell you ... It's the growers like myself and many others that do word of mouth and grow sharing. Plus their is no better customer service @robincnn and @Stephenj37826
They sell out pretty fast and there is a reason for that .... Peace.
I never saw boards like you have there.My apologies if this is the wrong place... but can anyone give me instructions on how to connect my non-official qb288x2 leds?
When I first hooked it up, it was only drawing 125 watts. Apparently, it was wired up in parallel. I tried to get it wired in series but it hasn't worked. The best result I could get was 280 watts but half the lights weren't turned on.
Each board would light up half the leds either at the top or bottom.
I've already started developing blisters flipping open the wagos an inordinate number of times so any help getting this board in series with all the lights lit up would be massively appreciated.
View attachment 4154370 View attachment 4154371
Assuming the red wire is negative, and the black and red wire is positive.My apologies if this is the wrong place... but can anyone give me instructions on how to connect my non-official qb288x2 leds?
When I first hooked it up, it was only drawing 125 watts. Apparently, it was wired up in parallel. I tried to get it wired in series but it hasn't worked. The best result I could get was 280 watts but half the lights weren't turned on.
Each board would light up half the leds either at the top or bottom.
I've already started developing blisters flipping open the wagos an inordinate number of times so any help getting this board in series with all the lights lit up would be massively appreciated.
View attachment 4154370 View attachment 4154371
thanks for the detailed explanation. i'll give it a shot after eating... if i start fiddling with it now, i'll end up starving myself for a couple hours trying to figure it out.So if you can post a better pic
Yes disconnect the wires not being used, so you dont short out on your heatsink.thanks for the detailed explanation. i'll give it a shot after eating... if i start fiddling with it now, i'll end up starving myself for a couple hours trying to figure it out.
basically, it goes?
1. L+- hooked up to R- to create the serial connection
2. L- hooked up to -driver
3. R+- hooked up to +driver
you say i should only use the top 2 connectors, so i'm not clear on why 3 on each side is meant to be used. i'll give both a shot anyways...
should the wires that are unused be disconnected from the board?
sorry if the picture is a jumble. the wires are multicolored and confusing even for me... i should probably put a sticker on and label them.
thanks again.
You absolutely should be able to get as much bud from 320 watts of QBs as you get from 600 watts of HPS. But many people run 1,000 watts of HPS in their 4x4s, which is what people are replacing with the HLG-550 and HLG-600 (4-board fixtures running 500-600 watts).Appreciate all the input. You covered the bases and well. Want to clarify Im not coming down on the light or the seller. Im saying a 320 watt quantum board light should flower a 4 x 4 tent just fine especially when in the hands of an experienced grower.
I've flowered 4x4 tents with 600 watts of hps using digital ballasts no problem. From what Im reading the 320 watt quantum board led blows a 600 hps out of the water correct? In fact I've been reading that some dont even have them running full blast.
So wouldn't it stand to reason that a 320 watt quantum ,in the right hands, could flower a 4x4 tent just fine?
Wouldn't it be overkill to add two of these to 4 x4 or even a 5 x 5 tent? Wouldn't it stand to reason that rather than putting 2 320 watt lights in a small tent you should consider moving your one light with a mover?
Seriously, one 320 watt on a mover would knock a 4 x 4 or even a 5 x 5 out of the park wouldnt it? Maybe Im crazy ...
Appreciate all the input. You covered the bases and well. Want to clarify Im not coming down on the light or the seller. Im saying a 320 watt quantum board light should flower a 4 x 4 tent just fine especially when in the hands of an experienced grower.
I've flowered 4x4 tents with 600 watts of hps using digital ballasts no problem. From what Im reading the 320 watt quantum board led blows a 600 hps out of the water correct? In fact I've been reading that some dont even have them running full blast.
So wouldn't it stand to reason that a 320 watt quantum ,in the right hands, could flower a 4x4 tent just fine?
Wouldn't it be overkill to add two of these to 4 x4 or even a 5 x 5 tent? Wouldn't it stand to reason that rather than putting 2 320 watt lights in a small tent you should consider moving your one light with a mover?
Seriously, one 320 watt on a mover would knock a 4 x 4 or even a 5 x 5 out of the park wouldnt it? Maybe Im crazy ...
I run 4, QB304 @ a total of 360 watts. YES it works fine!
Tents go up and down during the year ... Actually I'm looking to replace that 42x30 as it got a shitload of pinholes ... So it was dropped down until I find another.Beautiful...
You should be a salesman, if I didn't have one, I would get one immediately!!! And your house has to be HUGE!!! How do you have room for all that stuff???
42x30 feet?Tents go up and down during the year ... Actually I'm looking to replace that 42x30 as it got a shitload of pinholes ... So it was dropped down until I find another.
I wish ... Lol42x30 feet?
You're in Cali right? Living large and in charge!!! That's why I thought that your place was huge... So I just dropped 2 Gas and Guns and a Forum Stomper and a Blue Toof since my others are almost done... Considering the size of my tent, should I use one gallon pots or go with two gallon pots?I wish ... Lol
Need to find a better brand of tent .
Whats supposed to be the best?I wish ... Lol
Need to find a better brand of tent .