What did you accomplish today?

Indagrow

Well-Known Member
I just put the top coat on the two tone frame I'm running this year..first race is in two weeks and I have a monster jam race this weekend so I'm pretty pinched for time here. Tops going to be all white, bottoms black with a satin clear coat over it all..this will be the transition once my buddy's vinal plotter gets back up and running ill use it as a mask and do the final coats.. stock-vector-abstract-geometric-black-and-white-graphic-halftone-hexagon-pattern-515530828.jpg
Message_1524616321601.jpg Message_1524528691242.jpg
 
Last edited:

Grandpapy

Well-Known Member
Maybe a locksmith?
It would be weird if they showed up with a stethoscope... :roll:

No doubt the mechanism is made to be tamperproof, so I doubt if they could drill out the lock and replace it.

I could take a grinder to the welds and open it like a tin can, but that's a last resort. It would be scrap metal after that... :-(
Does it have a cheap ass floor with bolt holes for bolting down? that's where I'd cut mine.
You may try warming up the tumblers with a hair dryer. Before cutting.
 

ANC

Well-Known Member
Just hung the new light in the new veg room.
Shame the clones look bad, and with quite a bad case of mites. They will need a week or two of working on, but it is ok as I meant to give them a good trim.
I reckon I am just going to hit them with the pyrethrum this time and knock that shit back. I have a wetting agent somewhere too.
 

curious2garden

Well-Known Mod
Staff member
Just hung the new light in the new veg room.
Shame the clones look bad, and with quite a bad case of mites. They will need a week or two of working on, but it is ok as I meant to give them a good trim.
I reckon I am just going to hit them with the pyrethrum this time and knock that shit back. I have a wetting agent somewhere too.
I usually keep my dish soap by the sink. Congrats on the lights. I'm looking forward to hearing how they do. I'm considering getting some
 

Chunky Stool

Well-Known Member
Just hung the new light in the new veg room.
Shame the clones look bad, and with quite a bad case of mites. They will need a week or two of working on, but it is ok as I meant to give them a good trim.
I reckon I am just going to hit them with the pyrethrum this time and knock that shit back. I have a wetting agent somewhere too.
If it's like the pyrethrum I use, you don't want to wet the leaves. Just a light misting will do.
 

GreatwhiteNorth

Global Moderator
Staff member
I managed to lock myself out of my safe today.
Seriously.
Who would have thought it was even possible? Is this why the industry has gone to digital locking mechanisms?
It is made by Fort Knox and I bought it at a gun show in 1994.
Worked like a charm earlier this morning when I dry-trimmed a plant and put a couple of ounces away.
Tried to get in a few hours later and it's just not happening.
I've tried a million times...
Fuck!
Has anyone else had problems with old gun safes?
I'm guessing it's a mechanical lock & not electronic?
Mines a S&G that takes a 9v battery & when it happened to me I changed the battery out first thing & *poof* all better.

If it's mechanical I'd try the mentioned tapping method while dialing the combo.

G/L
 

whitebb2727

Well-Known Member
I managed to lock myself out of my safe today.
Seriously.

Who would have thought it was even possible? Is this why the industry has gone to digital locking mechanisms?
It is made by Fort Knox and I bought it at a gun show in 1994.
Worked like a charm earlier this morning when I dry-trimmed a plant and put a couple of ounces away.
Tried to get in a few hours later and it's just not happening.

I've tried a million times...

Fuck!

Has anyone else had problems with old gun safes?
Make and model? Key or combo?
 
Top