Arctic alpine mounting

[KonopCh]

Looking for idea how to mount/hang these. I tried with two aluminium L channels with yo-yo, but fans are quite strong and everything is shaking. I want to individually hang, not two together.

 

[CobKits]

you can try running the fans at lower voltage if you dont need all the cooling

 

[KonopCh]

you can try running the fans at lower voltage if you dont need all the cooling

Still need to hang them individually as I was asking...

 

[OLD MOTHER SATIVA]

bolt the fans thru the top of the sink and blast away

 

[Airwalker16]

Bring 4 same length of wire with some kind of “knot or crimp something to them to stop them from sliding out”, through the corner holes on the sink, coming to a center point. Hang. .....

 

[Airwalker16]

God Kapton tape is so shit.....

 

[VegasWinner]

I use wire from each corner to form a tent and hang the light from the structure and the wire will allow for vibration without noise. that is what I did, it works for me

 

[Airwalker16]

I use wire from each corner to form a tent and hang the light from the structure and the wire will allow for vibration without noise. that is what I did, it works for me

Exactly what I suggested

 

[KonopCh]

I use wire from each corner to form a tent and hang the light from the structure and the wire will allow for vibration without noise. that is what I did, it works for me

Hmm... I tried with "hemp wire" but it was shaking. Which wire do you use? Maybe try with electrical wire which is fatter?

 

[VegasWinner]

Hmm... I tried with "hemp wire" but it was shaking. Which wire do you use? Maybe try with electrical wire which is fatter?

I use solid copper wire more rigid but still flexible

 

[OLD MOTHER SATIVA]

forget it and attach more than one to a frame of some sort

 

[KonopCh]

So... how do I ground then? What about AC side - I have power cord from wall with ground wire, but I wired to ground wire at driver? Or do I need another wire to heatsink?

DC side like this?

 

[Moflow]

So... how do I ground then? What about AC side - I have power cord from wall with ground wire, but I wired to ground wire at driver? Or do I need another wire to heatsink?

DC side like this?

 

[Moflow]

That's an old one I've lying on shelf.
A.C. Brown and Blue to Cob, Green /yellow Earth to heatsink.
White bell wire to drive fan.

 

[KonopCh]

Yea, I've got exactly the same. Thanks.