What did you accomplish today?

whitebb2727

whitebb2727

Well-Known Member
I've been going through some rough cut oak lumber I have. I have a bunch of true 2x8 and 1x at various widths. All 8 foot long. I will be ripping some of the 2x8 in half to make 2x4's. I will then be using the lumber to build a 5x5 flower room in the basement. Figured it was time to go a little bigger.

Thinking of using three 315 watt cdms or around 900 watts of cobs, possibly 1200. Not sure yet.

I will be starting on this before long. I've already started beating the nails out of them.
 
WeedFreak78

WeedFreak78

Well-Known Member
Made breakfast. Smoked a bowl. Took clones, turned 100+gallons of dirt. Smoked a bowl. 2 loads of laundry, did dishes. Dab hits. Pulled a gas tank, mirrors and front suspension off a parts car then started loading it with scrap. Smoked a bowl. Moved a dozen, soaking wet, fucking heavy, 8"x 10" x 6ft pressure treat beams, dab hits, just so I could move a couple axles. Smoked a bowl. Tuned up my buddies parents snowblower. Dab hits. Got a different axle set up on jack stands and started pulling the brakes apart. Went to dairy queen and got a burger, fries, soda and Blizzard. Now I'm smoking a fatty, then the Blizzard.
 
GreatwhiteNorth

GreatwhiteNorth

Global Moderator
Staff member
WeedFreak78 said:
Made breakfast. Smoked a bowl. Took clones, turned 100+gallons of dirt. Smoked a bowl. 2 loads of laundry, did dishes. Dab hits. Pulled a gas tank, mirrors and front suspension off a parts car then started loading it with scrap. Smoked a bowl. Moved a dozen, soaking wet, fucking heavy, 8"x 10" x 6ft pressure treat beams, dab hits, just so I could move a couple axles. Smoked a bowl. Tuned up my buddies parents snowblower. Dab hits. Got a different axle set up on jack stands and started pulling the brakes apart. Went to dairy queen and got a burger, fries, soda and Blizzard. Now I'm smoking a fatty, then the Blizzard.
Click to expand...
Damn, I'd be unconscious by now if I were you. o_O
 
WeedFreak78

WeedFreak78

Well-Known Member
Bareback said:
@WeedFreak78 I have a 07 Denali envoy the damn air suspension went out, I can't find the control unit that is suspended to be mounted on the side of the fuse box , do you know of some other locations for it.
Click to expand...
I'm not familiar with those. Shit like that is usually behind the kick panels, or under the middle of the dash, especially if it has a center console. Could also be under hood by the power center/ fuse box.
 
WeedFreak78

WeedFreak78

Well-Known Member
Grandpapy said:
True, but are all your dishes clean now?:lol:
Click to expand...
No. I can't honestly remember the last time there wasn't some dirty dishes around. I cook multiple times almost every day and am prone to letting shit soak until anything just rinses off before I even touch it with a sponge. :bigjoint: Then my buddies come around with food and cook and leave the dishes behind. I need a dish washer but my kitchens is too fucking small and has weird low counters that no dishwasher fits under. Luckily I have a huge double farmers sink, like this, so it's not all that bad. My kitchens even that same shitty 40s yellow...:spew:



That's a lot of info on my dish washing habits. I'm so fucking highbongsmilie
 
WeedFreak78

WeedFreak78

Well-Known Member
curious2garden said:
The guys here should be able to help you:
http://www.trailvoy.com/

Frankly I'd seriously consider converting to shocks/struts and coil springs.
Click to expand...
No way, air ride is the shit for anything you're going to actually put miles on, no way a conventional spring will ride as good. Plus there's almost instant ride height adjustability and load leveling capability. Neither of which can be had with a conventional springs. I'd like to convert my truck to a rear air ride suspension in the future.
 
curious2garden

curious2garden

Well-Known Mod
Staff member
WeedFreak78 said:
No way, air ride is the shit for anything you're going to actually put miles on, no way a conventional spring will ride as good. Plus there's almost instant ride height adjustability and load leveling capability. Neither of which can be had with a conventional springs. I'd like to convert my truck to a rear air ride suspension in the future.
Click to expand...
Yeah kneeling in the C5 was something I'd convert too ha ha!
 
You must log in or register to reply here.
Top