You all are funny as hell! On a side note, that is a nice resin shot. how'd it smoke?
What I accomplished yesterday is finalizing my DWC setup. The only issue that I ran into and I have to fix is that the pump that I initially bought for the master pump (kinky right). I originally bought a 500 gph to run and this is that part that I overlooked was that the rate of flow was seriously reduced due to the length of piping. The total length of 1.5 pvc is 10 feet plus the 1 inch line at 3.5 feet. I can't believe that I missed this one because I have built many of complicated full setup reef aquariums that were fully automated with the exception of buying the chemicals and putting them up to the auto feed system. Enough of that!
When I went to fire up my system for the first time. The water pumped about 60 gph on the end result. So I have to buy a 1200 gph to compensate. 500 gph in a 4 site system should be adequate right? Or is less current best?
So my question is how many gph is needed for a DWC setup? I will post pics of my setup in just a bit, I have to gettem' off the phone.