Gary Goodson
Well-Known Member
No don't do it.
What did you accomplish today?
- Thread starter 420God
- Start date
HydoDan
Well-Known Member
Why??
BarnBuster
Virtually Unknown Member
Looks like a nine step program to me.
Also, I hope one is paying attention to orientation upon insertion of the last one.
Extraction might be difficult if done improperly.
UncleBuck
Well-Known Member
2 doors and one window yesterday. it was a thursday-friday job, i showed up at 10 am on friday because reasons.
work order reads: "1x4 casing and corner blocks, bring router". they sent me out with 6 sticks of 8 foot clear pine and 4 rosettes. the trim was custom rosettes and plinth blocks and custom casings too. fuck me.
so i found (luckily) an old 1/8th inch roundover bit an that matched the profile on everything. fabricated 4 plinth blocks, routering 3 edges of each. every time you router an edge you need to set two clamps. it's time consuming.
then the legs and header pieces had to be ripped down to 3 1/4'' for side to side reveal, and rip-narrowed to 1/2'' for front to back reveal. and then, of course, routered with the 1/8th inch roundover. of course the clamps just barely got in the way of the router at 3 1/4'', so i had to set the clamps twice on each side for all 6 pieces.
walked off the completed job at 8 pm. it looked perfect though.
work order reads: "1x4 casing and corner blocks, bring router". they sent me out with 6 sticks of 8 foot clear pine and 4 rosettes. the trim was custom rosettes and plinth blocks and custom casings too. fuck me.
so i found (luckily) an old 1/8th inch roundover bit an that matched the profile on everything. fabricated 4 plinth blocks, routering 3 edges of each. every time you router an edge you need to set two clamps. it's time consuming.
then the legs and header pieces had to be ripped down to 3 1/4'' for side to side reveal, and rip-narrowed to 1/2'' for front to back reveal. and then, of course, routered with the 1/8th inch roundover. of course the clamps just barely got in the way of the router at 3 1/4'', so i had to set the clamps twice on each side for all 6 pieces.
walked off the completed job at 8 pm. it looked perfect though.
ANC
Well-Known Member
half past 10, said it was going to turn into a late night thing. The COBs are blinding.
Have not taken my psych meds yet, which means I can skip them, and never go to bed despite being tired, or take em and be a zombie till 12 in the afternoon and then a warmed over corpse for the rest of the day.
Going in that room with no protection will seriously fuck with your eyesight.
Have not taken my psych meds yet, which means I can skip them, and never go to bed despite being tired, or take em and be a zombie till 12 in the afternoon and then a warmed over corpse for the rest of the day.
Going in that room with no protection will seriously fuck with your eyesight.
tangerinegreen555
Well-Known Member
Weed wacked the hill out back, area the size of a football field on a grade.
I want to defoliate the hill at top of pic this winter. There is a big flat spot up there. I used to have it set up as a golf hole. The tee off on top up there, and I'm taking pic from the small green.
145 yard par 3. If you go over, you're fucked. I'm going to restore it for next spring. I still have the metal hole and flag pin, need a new flag.
I should get a screen for the exposed shed window 1st. Lots of duffers and hacks. And guys who don't even play always wanted to try it.
I remain undefeated on my single golf hole.
I want to defoliate the hill at top of pic this winter. There is a big flat spot up there. I used to have it set up as a golf hole. The tee off on top up there, and I'm taking pic from the small green.
145 yard par 3. If you go over, you're fucked. I'm going to restore it for next spring. I still have the metal hole and flag pin, need a new flag.
I should get a screen for the exposed shed window 1st. Lots of duffers and hacks. And guys who don't even play always wanted to try it.
I remain undefeated on my single golf hole.
Singlemalt
Well-Known Member
thump easy
Well-Known Member
Reesufaced a small area and it kicked my ass 105 F*
Hey thump good to see you, it's brutal up here in the Mojave, we are getting thunderstorms through so humidity is way up, ugh!
Downtowntillman
Well-Known Member
I didn't!
cannabineer
Ursus marijanus
I was gonna say "how's it hanging" but things are different around here ... I do not recommend whipping it out here any longer
neosapien
Well-Known Member
I went and did a tutorial today. Which is my usual Saturday morning job. Except the first thing the lady told me was that the neighbor came over yesterday bitching about the fence guys walking on his side of the property and that one thing led to another and she pushed him and he called the cops on her lol. Aww living and working in suburbia is funny sometimes.
Metasynth
Well-Known Member
neosapien
Well-Known Member
Love that fucking movie lol.
thump easy
Well-Known Member
Wow thank you guyz i miss you guyz just hear slow this time of year.
Well just hear working on the house been slow im getting old i miss aroe i think i just might for old tyme sakes and not for sale deff not for sale to much goes into a perfect flower just for friends im still thinking on it if i do you guys are welcome to some
cannabineer
Ursus marijanus
I'm in Tuolumne County and forget where you areWow thank you guyz i miss you guyz just hear slow this time of year.
Well just hear working on the house been slow im getting old i miss aroe i think i just might for old tyme sakes and not for sale deff not for sale to much goes into a perfect flower just for friends im still thinking on it if i do you guys are welcome to some