ttystikk
Well-Known Member
LED works great for vertical grows. Simply adjust the shape of your trellis.
Vert(600+400) 5 plant, from Ukraine with love
- Thread starter Sedan
- Start date
- Status
Sedan
Well-Known Member
Now, once again, we'll try to figure things out together!
This is not about the vertical method of cultivation, but specifically about the method of "Sphere". The way that I use.
We have two types of lighting: LED and Sodium lamp.
There are four plants: A, B, C, D
The sodium lamp (here everything is clear, all plants get evenly across the entire surface of 600 watt of light.)
But with LED does not work all smoothly:
So (Only one plant receives 600 watt of light throughout the plane.)
So (in this case, only the upper part gets a total volume of light of 600 Watts, the lower ones are much smaller.)
Or so (if you divide the panel into four parts, you get 600/4 = 150 watts per plant or 4X600 = 2400 watts in total.)
My conclusion is simple: LED in the form that it is not suitable for cultivating Sphere - the most productive way in terms of parameters: light / area / yield.
Sedan
Well-Known Member
After a week of "ripen GHE" 0,5 ml / l, today began to wash with water. He poured 5 liters of PN 6.5 into a ten-liter pot. Let me remind you that the Dwarf auto stood 12/12 almost the entire cycle, so he did not get the full condition. Still, recently, the Oaks began to obscure it. But still, I think, I'll take 80 grams, which is the average result for this grade.
And the main garden .. a small preview ...
And the main garden .. a small preview ...
Last edited:
ANC
Well-Known Member
Those are high quality speakers.
The bottom part is more for show, as low-frequency sound waves are much bigger than the speaker so harder to pinpoint.
By putting the cone in front of it and firing upwards, the sound now radiates more asif it comes from a point source with no beaming.
The bottom part is more for show, as low-frequency sound waves are much bigger than the speaker so harder to pinpoint.
Our ears are very good at finding the source of high frequencies, which is not ideal if you want all the sound to originate from one point.(the same point the bass and mids come from
If you put a loudspeaker horizontal like usual, the tweeter makes a beam of good sound with bad zones outside of this... (almost like an LED or a car's headlights).By putting the cone in front of it and firing upwards, the sound now radiates more asif it comes from a point source with no beaming.
Sedan
Well-Known Member
Bro, very competent scientific calculations you have!
Bro, I see a diffuser audio speaker.))) And realized already logically that this is part of an expensive acoustic system. Although I did not see the current (I have an acoustics bose in my car))) I thought that you showed the LED lamp, converted from the speaker, and ready to use! I understand your concept, but, unfortunately, I do not understand in electronics. And I can not understand the principle of the operation of diodes. This requires funds and time, for experiments and experiments. I do not have no other then .......
ANC
Well-Known Member
You don't have to know very much once you choose an LED.
People use premade drivers, that put out fixed current or voltage.
All diodes in a string run at the same current, so you can get a driver that puts out current at a good level for the diode, and then just divide the output voltage it can do by the forward voltage of LEDs to see how many you can string up.. There are good tutorials on youtube.
You are a good grower, I don;t think it will add to your yield. but will be cheaper to cool if you use air conditioning in the room.
People use premade drivers, that put out fixed current or voltage.
All diodes in a string run at the same current, so you can get a driver that puts out current at a good level for the diode, and then just divide the output voltage it can do by the forward voltage of LEDs to see how many you can string up.. There are good tutorials on youtube.
You are a good grower, I don;t think it will add to your yield. but will be cheaper to cool if you use air conditioning in the room.
Sedan
Well-Known Member
Bro, I do not understand either in the electrician, or in electronics .... only I can guess a little. I have enough material to study and progress without it.))) I have a lot of friends in the former USSR who are just sick with LED. They are constantly with soldering irons and something to solder.))) They are not important as a matter of fact the garden, the main thing is to solicit that-niyuud such .., such as that said! I'll give them an idea, and I'll tell you what they think about your concept !!
And if we do something with you, it will be a fundamentally new solution for the VERT !!
Bro, on YouTube, that's what we know, and what they want to sell, and we need fresh solutions !! They can come only from us !! All that has already been invented, we know !! It remains only to leave your .. it is your mark in history-this is the goal of a true scientist!
As we say: "Do not press on the sick callus"))) Just think: I now pay for the light about $ 100, I use 1500 watts. The weakest outdoor air conditioner consumes 1800 watts. How much do I have to pay a month, if the average salary is $ 200 for us)) Another rent, food, clothes, son, car, wife and cat Elsa))) Do you understand what I mean?))
The problem is that I can not realize myself in the face of a constant economic crisis! You do not understand this, but here it is the main problem for me. But I'm working now to get rid of the burden of need, the main thing is to move forward and only forward, no matter what!
Sedan
Well-Known Member
And it is right! I will also add something to the next cycle, which will increase the result and thereby lead to a new level! Protsto it so happened that over the past three years, that I am cultivating, my result is better and better! Naturally, I'm going ahead! Bro, and also, as the revolutionaries used to say): "When we are one, we are invincible." Fresh ideas from diametrically opposite sides will give an unprecedented result! Minus and minus-plus-do not forget it's math!)))
I liked your ideas too, Bro! You have a fresh head !!
ANC
Well-Known Member
The metal top you have, make one for the bottom too. The hole can be smaller. hang a few CM above bottom fan, air can go around. 3 notches cut out for plant bases. In the centre of each hole place one LED or a cluster firing at the other side.
It will be nice and bright like the inside of a UFO.
It will be nice and bright like the inside of a UFO.
ttystikk
Well-Known Member
gr865
Well-Known Member
Hey Ty,
What is the wattage of your LED wall, and they are cobs right, don't remember from your journal?
GR
ttystikk
Well-Known Member
Each plant had 4 x 225W COB LED fixtures. It was borderline excessive lighting lol
Roger A. Shrubber
Well-Known Member
i hear "kodachrome" in my head when i look at the pic. i bet i've seen coneheads 100 times over the years
- Status