Go go n chill
Well-Known Member
Is there anything wrong with changing from CFL lighting to A much better LED light source during flowering
Killing me stupid question I guessMaybe...?
Wholly shit you knew that guy too?I knew a guy who changed his light mid grow, 2 days later, DEAD.....
Me neitherNot a stupid question... but you asked it 3 times.
There should be no problem switching sources. As long as it's suited of course. You may have to gradually add the light if it's a lot more intense though.
And no one likes when the forum is being flooding with the same question 3 times.
Depends on the area/coverage with the one panel vs. a bunch of cfl's spread out. If it's not you'll have no problem running the panel + some cfl's as the heat will be much less with the panel. I once ran some cfl's supplementing some old LED's in a breeding tent and mixed up the spectrum, got a really nice run at 1/gpw in a SOG.Ok here is what I'm doing. Over the last 5 weeks I've went from 10. 23 w cfl bulbs to 15 cfl bulbs. I purchased a vispar 600w with veg and bloom switches. The true wattage is lower than my cfl setup but I thought it would be an improvement. Question is........ WILL IT BE? I should be picking the light up today
The specs say 276 true watts covering a 3x3 area , which is bigger than mine which is 3x2 compared to my 345 watts from my cfl fixture. Thoughts, before I auctually give this cat my moneyDepends on the area/coverage with the one panel vs. a bunch of cfl's spread out. If it's not you'll have no problem running the panel + some cfl's as the heat will be much less with the panel. I once ran some cfl's supplementing some old LED's in a breeding tent and mixed up the spectrum, got a really nice run at 1/gpw in a SOG.
Yeah you should be good, that's 46w/sq,. ft which is right around what you'll need from a blurple panel.The specs say 276 true watts covering a 3x3 area , which is bigger than mine which is 3x2 compared to my 345 watts from my cfl fixture. Thoughts, before I auctually give this cat my money
Depends on the area/coverage with the one panel vs. a bunch of cfl's spread out. If it's not you'll have no problem running the panel + some cfl's as the heat will be much less with the panel. I once ran some cfl's supplementing some old LED's in a breeding tent and mixed up the spectrum, got a really nice run at 1/gpw in a SOG.
i plugged it in and removed the cfl fixture. It didn't look bright! It's a vispar spectra 600 reflector series w/veg and grow switches. I've looked for grow journals but couldn't find one where someone was using JUST one of these . I put the old fixture back up. Is it just that I'm expecting to see bright light but not? Which should I use iyo?Yeah you should be good, that's 46w/sq,. ft which is right around what you'll need from a blurple panel.
Pics? of the diodes with both switches on? Was it used or something?i plugged it in and removed the cfl fixture. It didn't look bright! It's a vispar spectra 600 reflector series w/veg and grow switches. I've looked for grow journals but couldn't find one where someone was using JUST one of these . I put the old fixture back up. Is it just that I'm expecting to see bright light but not? Which should I use iyo?
Yes it was used, still has warranty. All LEDs come on. I can't get pics of it till tomorrow evening. Like you said " blurple " I do not have a way to mix the 2 light sources right now. Bummed, thought for sure the LED was going to shower them girls in lightPics? of the diodes with both switches on? Was it used or something?
If you can handle the heat run a mix while you figure out next steps, mixed spectrum works well. I've never seen those diodes fade, have seen them burn out altogether but not fade. I have some of those Top LED (Mars) reflector series I use for veg. A couple have recently burned out diodes, I've run those for 4 years in veg 18/6 & 20/4 though so not bad, they were cheap to run.Yes it was used, still has warranty. All LEDs come on. I can't get pics of it till tomorrow evening. Like you said " blurple " I do not have a way to mix the 2 light sources right now. Bummed, thought for sure the LED was going to shower them girls in light
http://www.viparspectra.com/goods.php?id=59Yes it was used, still has warranty. All LEDs come on. I can't get pics of it till tomorrow evening. Like you said " blurple " I do not have a way to mix the 2 light sources right now. Bummed, thought for sure the LED was going to shower them girls in light
Yeah they're similar tech to the older Mars panels, 3w diodes. Weird that you're saying it's not bright enough. Would like to see what it looks like.
Thanks for reading. I think it's just my expectations.... But I don't have long to mess with the girls before the house gets busy. I'm gonna try to figure out a mix.If you can handle the heat run a mix while you figure out next steps, mixed spectrum works well. I've never seen those diodes fade, have seen them burn out altogether but not fade. I have some of those Top LED (Mars) reflector series I use for veg. A couple have recently burned out diodes, I've run those for 4 years in veg 18/6 & 20/4 though so not bad, they were cheap to run.