DIY with Quantum Boards

[smokeybeard]

I am running my 260 kit in a 2x4 at half way on. (Adjusted through the A driver type adjustment.) The light is hanging about 12-14 inches above. Should I turn the light up more?

 

[kcir916]

I am running my 260 kit in a 2x4 at half way on. (Adjusted through the A driver type adjustment.) The light is hanging about 12-14 inches above. Should I turn the light up more?

I would go 16-18 inches away. Im running 2 kits in a 5x5 on half juice also.

 

[215Kush]

I burned a few fan leaves in veg when I had my light at 12 to 14 inches from canopy and I'm running 4 board at about 550 from wall. I think 16-18 inches is about right. They get great penetration so raising another two inches maybe more beneficial. mine are about 18 inches and I'm five weeks into bloom. so far so good
Good Luck!

 

[drgroove]

Hi,

I plan to build the following light :




with 2 288 QBs, 2 slates and 1 HLG-120H-C1400A,

in 60x60x160cm (2x2x5') tent.




for a one plant scrog or mainlining.

Is this enough / too much light ?

Thanks.

 

[RandomHero8913]

That should work out pretty dang well.

 

[drgroove]

Thanks @RandomHero8913

 

[RandomHero8913]

Hi,

Those are nifty looking graphics, may I ask what program you use?

 

[drgroove]

Those are nifty looking graphics, may I ask what program you use?

this one.

 

[drgroove]

V2

 

[Budzbuddha]

Tangerine Dream ( 4 panel quantum / Cobs )

Little Groot Lovin life ! For those wondering about young plants under quantum.

 

[eminiplayer]

@Budzbuddha : Very nice... how many what's and what distance do you recommend for seedlings?

 

[pop22]

Back from vacation and my plants look great! Gotta love auto pots!

 

[pop22]

Very well done!

Part 2 is available

 

[pop22]

Check out Ministry of Cannabis if you like big autos! Their Blueberry Domina is great! Got some in my greenhouse now to see how they do in a 4'x8' raised bed.

Amnesia Haze Auto getting the axe tomorrow... This auto was really not what I expected.
I am rather new to Royal Queen seeds and really am kinda pissed. I found out that THIS amnesia " VERSION " is a cross with LOWRYDER !
I hate LOWRYDER / Dwarfy strains .... But she smells awesome but really didn't get all that big. Chunky but guess this will be used for RSO or glycerin.
Fucking freebies ! .... Hahaha

View attachment 3961162

 

[topher73]

Back from vacation and my plants look great! Gotta love auto pots!

View attachment 3963929 View attachment 3963930

Looking good!! I am not sure if you noticed, but I did see a big fan leaf with stipple marks. Do you have spider mites?

 

[Indoorpro]

Well the 260 watt kit sold out.... so im going the next route and getting two slate 3 triple and four 288qb... i know this driver HLG-240H-C2100a can work with 2 288qb but can it also work with 3 288qb per slate 3 triple?

 

[Randomblame]

Well the 260 watt kit sold out.... so im going the next route and getting two slate 3 triple and four 288qb... i know this driver HLG-240H-C2100a can work with 2 288qb but can it also work with 3 288qb per slate 3 triple?

Nope!
If you wire the 3 boards in series you need at least 3x 54v=162v, a HLG-240H-C1400 or a HLG-320H-C1750 would be fine here.

 

[Indoorpro]

Next ? do these drivers comes with the power plug ?

 

[Randomblame]

Next ? do these drivers comes with the power plug ?

Nope!
If they are installed in a housing for instance, a wall plug would be useless. So you have to do it yourself! Search for the datasheet of the driver you want, there are all specs listed incl. which awg wires are used.

 

[Indoorpro]

thx you