DIY with Quantum Boards

robincnn

robincnn

Well-Known Member
legalcanada said:
so the hlg-600-54 will run four 288s on the slate 5, which driver would be required for four 304s running at near max? or would that require 2 drivers? just because the one 4 board lamp you sell says it maxes at 515w or something. will you be getting those slate 5s in with your boards this week or are those a little ways off? would love to get one to flower this run i'm doing
Click to expand...
Got 35 pcs slate 5. Waiting on boards and screws. Stock will be added to website towards end of this week.
Qb304 is 100+V so won't work with HLG600. You can use hlg-240-1050 for 2x qb304 in series
 
9

907guy

Well-Known Member
pop22 said:
Since I corrected the timer problem, about 10 days.
Click to expand...
I highly recomend Sensor Push for anyone wanting to be able to remote monitor things. It's saved me several times when I've noticed temps not dropping when lights should be off, etc. get the gateway and you can monitor from anywhere. Extremly easy to set up, I haven't been impressed so much with something in a while at the ease of setup and flawless performance.

The flower tents are empty currently :( and lights are off in the Veg tent right now.

IMG_6589.PNG IMG_6590.PNG IMG_6591.PNG
 
ttystikk

ttystikk

Well-Known Member
907guy said:
I highly recomend Sensor Push for anyone wanting to be able to remote monitor things. It's saved me several times when I've noticed temps not dropping when lights should be off, etc. get the gateway and you can monitor from anywhere. Extremly easy to set up, I haven't been impressed so much with something in a while at the ease of setup and flawless performance.

The flower tents are empty currently and lights are off in the Veg tent right now. :(

View attachment 3955380 View attachment 3955381 View attachment 3955382
Click to expand...
How much did it cost?
 
9

907guy

Well-Known Member
ttystikk said:
How much did it cost?
Click to expand...
The sensors were $50 each and the gateway is $100, you can use them without the gateway but you have to be within bluetooth range. The gateway has a bluetooth receiver and acts as a wifi gateway. Once the gateway is setup you can disable bluetooth as you can read everything across your wifi network and then anywhere as their cloud service is free.

If you look at my post here https://www.rollitup.org/t/diy-with-quantum-boards.927159/page-219#post-13573647 you can see the little blue and green square sensor hanging from a string in the middle of the tent.
 
pop22

pop22

Well-Known Member
Great prices. I'd buy if they had a ph sensor.

907guy said:
The sensors were $50 each and the gateway is $100, you can use them without the gateway but you have to be within bluetooth range. The gateway has a bluetooth receiver and acts as a wifi gateway. Once the gateway is setup you can disable bluetooth as you can read everything across your wifi network and then anywhere as their cloud service is free.

If you look at my post here https://www.rollitup.org/t/diy-with-quantum-boards.927159/page-219#post-13573647 you can see the little blue and green square sensor hanging from a string in the middle of the tent.
Click to expand...
 
714steadyeddie

714steadyeddie

Well-Known Member
907guy said:
The sensors were $50 each and the gateway is $100, you can use them without the gateway but you have to be within bluetooth range. The gateway has a bluetooth receiver and acts as a wifi gateway. Once the gateway is setup you can disable bluetooth as you can read everything across your wifi network and then anywhere as their cloud service is free.

If you look at my post here https://www.rollitup.org/t/diy-with-quantum-boards.927159/page-219#post-13573647 you can see the little blue and green square sensor hanging from a string in the middle of the tent.
Click to expand...
That's neat and cheap. Would be useful for folks who are always away from the operation
 
pop22

pop22

Well-Known Member
It just shows what a ripoff some of the "hot" new units are. Saw one, $399 plus I think $79 per sensor. I hate the whole "stoners got money, lets milk them".........attitude prevalent in the market.
907guy said:
First thing I did the day I hooked them up was email them to tell them how great of a product it was and that they need to add more sensors, control relays would be even cooler!
Click to expand...
 
legalcanada

legalcanada

Well-Known Member
714steadyeddie said:
That's neat and cheap. Would be useful for folks who are always away from the operation
Click to expand...
found one that is 50$ CAD including the wifi gateway. the sensorpush is 69$ and 133$ for the gateway (CAD) on amazon. It's called La Crosse Alerts 926-25101-GP Wireless Monitor System Set with Dry Probe
 
9

907guy

Well-Known Member
legalcanada said:
found one that is 50$ CAD including the wifi gateway. the sensorpush is 69$ and 133$ for the gateway (CAD) on amazon. It's called La Crosse Alerts 926-25101-GP Wireless Monitor System Set with Dry Probe
Click to expand...
Requires monthly subscription if you want alerts and only 5 sensors per gateway. Unlimited with sensor push and no subscription! No water detector though or water temp probe either though.
 

Attachments

You must log in or register to reply here.
Top