DIY with Quantum Boards

Roger A. Shrubber

Well-Known Member
Just out of curiosity, what is the relevance of wet weight and why would one record that info?
actually not a lot in normal circumstances. if you look back a few pages, there's a small argument going on about how much someone claims to have harvested, i was just trying to give a real time demonstration of how much weight a fresh plant loses as it dries
and it is a rough estimate of your final yield, i've found it to be pretty accurate most of the time, just divide by 4
 

robincnn

Well-Known Member
Slate 1 Single VS Slate 3 single
Slate - 1.2lbs
Slate 3 - 1lbs
Cooling performance almost Identical.

Slate 3 wont replace Slate 1. Although Slate 3 is thinner and lighter, the cost did not go down. Thinner extrusion = more scrap/defect rate

upload_2017-6-4_14-49-3.png
Slate 1 left, Slate 3 Right

More pics of Slate 3 single
upload_2017-6-4_14-52-6.png
upload_2017-6-4_14-52-23.png
 

legalcanada

Well-Known Member
@robincnn hey robin man sorry to bug you just a couple questions, couldn't figure out how to PM. will there be a slate2 triple board heatsink at all in the future? and i only really need 1 driver so I'm thinking i'll get 1 kit and 2 boards+heatsink separately, but I don't really understand the difference between the 2 types of boards or which would be best for my purposes (higher amp or higher voltage). thanks
 

robincnn

Well-Known Member
@robincnn hey robin man sorry to bug you just a couple questions, couldn't figure out how to PM. will there be a slate2 triple board heatsink at all in the future? and i only really need 1 driver so I'm thinking i'll get 1 kit and 2 boards+heatsink separately, but I don't really understand the difference between the 2 types of boards or which would be best for my purposes (higher amp or higher voltage). thanks
Yes waiting of some final parts, screws, boards, reflectors. Should have a sale next weekend.
Slate 3 Triple Kits wont be available anytime soon. need to test some configs and find what driver/wattage suits best.

288 vs 304, just go with either depending on availability in desired Spectrum. 2 options are to give flexibility of driver opinions.
upload_2017-6-4_14-59-37.png
https://horticulturelightinggroup.com/pages/qb-optics-and-connectors


Slate 3 Triple

Pre drilled to hold Meanwell LED Driver
  • HLG-80H
  • HLG-100H
  • HLG-120H
  • HLG150H
  • HLG185H
  • HLG-240H
  • HLG-320H

upload_2017-6-4_14-53-18.png

upload_2017-6-4_14-53-32.png
upload_2017-6-4_14-53-49.png
2 Boards with Driver in Center Backside

upload_2017-6-4_14-54-4.png3 Boards with Driver in Center Backside
 

Madmungo

Well-Known Member
SLATE 5 Quad Extrusion
Holds 4 board
Length 740mm

Biggest baddest extrusion. It is like Slate 2 extrusion gone Hulk.

View attachment 3954760

View attachment 3954762

View attachment 3954764

View attachment 3954765
3 holes in center for HLG 480 or HLG 600 on backside

View attachment 3954766

View attachment 3954767

back to 50 unread emails :spew:
I add a lot of large angle aluminium to a double kit so I can mount the driver away from the heatsink, am I making it better or worse?
 
Top