What did you accomplish today?

Bareback

Bareback

Well-Known Member
WeedFreak78 said:
Cut a piece a regular 12ga stranded wire long enough to get 1 or 2 wraps around the spool, plus whatever you need sticking out of the weedwhacker. It'll cut through small branches and last all year. Just need to be careful, it'll cut into brick, wood, siding, pretty much anything softer than the wire. I haven't had a piece break off....... yet.
Click to expand...
Will this method be safe in flip-flops. Lol.
 
Indacouch

Indacouch

Well-Known Member
WeedFreak78 said:
Cut a piece a regular 12ga stranded wire long enough to get 1 or 2 wraps around the spool, plus whatever you need sticking out of the weedwhacker. It'll cut through small branches and last all year. Just need to be careful, it'll cut into brick, wood, siding, pretty much anything softer than the wire. I haven't had a piece break off....... yet.
Click to expand...
420God said:
View attachment 3937016
Click to expand...
Well what in the actual fuck guys ....that shit sounds dangerous and very effective ....luckily I have a little more weed eating to do in my back yard ......I'm guna try the 12ga wire thing first ....might even throw a zip tie on that bitch for good measure......can't wait to see what that shit feels like when it smacks me in my shin ......as long as it kills the total fuck out of my weeds .....I'm game


TY for the tip .....il let you know how it goes next time INDAS landscaping service is on the job ...
 
Indacouch

Indacouch

Well-Known Member
Bob Zmuda said:
View attachment 3937028
Metal tooled golden trout I did at work today.

Unfinished
Click to expand...
Bro if you cut that out of the metal you drew it on ....it would look like a giant lure ((very nice)) you should cut it out and put some giant hooks on it and hang it up as art .....very cool Bob .......did you see my epoxy penis ....I'm not trying to out due you or anything

Butimage.jpg
 
whitebb2727

whitebb2727

Well-Known Member
WeedFreak78 said:
Cut a piece a regular 12ga stranded wire long enough to get 1 or 2 wraps around the spool, plus whatever you need sticking out of the weedwhacker. It'll cut through small branches and last all year. Just need to be careful, it'll cut into brick, wood, siding, pretty much anything softer than the wire. I haven't had a piece break off....... yet.
Click to expand...
I had a piece of wire break in one. Not fun. Hit something and about an inch of wire came off and into my leg.

Be careful with wire.
 
Singlemalt

Singlemalt

Well-Known Member
whitebb2727 said:
I had a piece of wire break in one. Not fun. Hit something and about an inch of wire came off and into my leg.

Be careful with wire.
Click to expand...
I had gotten one of those aftermarket gizmos with nylon blades, worked well but wore out the blades quickly and they were expensive, So I figgered I'd rework the concept and used old hacksaw blades instead of new nylon ones. Worked great til I hit a large rock, the blades shattered and sent shrapnel all over the place. Missed me, luckily, but found out about 10 min later some shrapnel had punctured my fuel can. 3 gal of mix drained into the ground. The next day I also found shrapnel had punctured a dripline, of course this was after the water cycle was done lol
 
420God

420God

Well-Known Member
Singlemalt said:
I had gotten one of those aftermarket gizmos with nylon blades, worked well but wore out the blades quickly and they were expensive, So I figgered I'd rework the concept and used old hacksaw blades instead of new nylon ones. Worked great til I hit a large rock, the blades shattered and sent shrapnel all over the place. Missed me, luckily, but found out about 10 min later some shrapnel had punctured my fuel can. 3 gal of mix drained into the ground. The next day I also found shrapnel had punctured a dripline, of course this was after the water cycle was done lol
Click to expand...
Here's mine. I had one of those too but ran out of the blades, I have lots of zip ties.
20170505_191945.jpg
 
You must log in or register to reply here.
Top