What did you accomplish today?

[Nugachino]

Identified what I believe to be a hermi... and looked for jobs. Plus swore at my phone for being a monga.

Here's the hermi

 

[lokie]

18 year old Lumina with 45K miles. The kind of low mileage car you want to keep nice.
It's looks new again. My daughter loves that car.

I'v had 2 luminas. The first 1 sucked shit through a tube. It had electronic issues daily
and stayed in the repair shop almost as much as I drove it.

The 2nd was a 97 model and it was a good car. It shit the bed last month with over 250K miles.
I had the transmission replaced once. and it had some minor electronic issues.

Last month the transmission gave up again. I sold it "where it sat, as is" to a dude for $50.
The junk yard said they would buy it for $150. It would have cost me $50+ just to tow it to the yard.
So for the $50 I walked away without having to lift a finger.

 

[ttystikk]

I've been running vertical grows for so long that I had to go back to basics to relearn Flatlander SOG. It's going well tho.

 

[D528]

First get hella high then....sanding, filling the new trim i made . Had it milled outta poplar the cove and base . One more fine sand then final then do base shoes i did like i did my floor when i installed it.But first touch up walls. Satin impervo lays out pretty well.my window casings look like plastic.lol.I used to doing floor so i could do better .Just gotta find the zone. Then i can empty my garage out . Then finish the next bedroom . Take me awhile. doing this trim every time i look up i rush out and hypotension doesnt help. ,lol. fucking ppv . lol. i can fuck myself up just watching the computor screen scroll to closely.. lol.

The house had the cheapest fake wood bull shit trim ever before !!!!! This aint pulling off ! Man i hate mdf , only good for speaker box in my world . Barely at that !

 

[TacoMac]

Wheeled my Vmax out of the garage only to find that the battery was dead.

I don't ride nearly as much as I should.

(Yes, it was on a battery tender. All the water was gone from the cells.)

 

[TacoMac]

First get hella high then....sanding, filling the new trim i made . Had it milled outta poplar the cove and base . One more fine sand then final then do base shoes i did like i did my floor when i installed it.But first touch up walls. Satin impervo lays out pretty well.my window casings look like plastic.lol.I used to doing floor so i could do better .Just gotta find the zone. Then i can empty my garage out . Then finish the next bedroom . Take me awhile. doing this trim every time i look up i rush out and hypotension doesnt help. ,lol. fucking ppv . lol. i can fuck myself up just watching the computor screen scroll to closely.. lol.
View attachment 3913475
The house had the cheapest fake wood bull shit trim ever before !!!!! This aint pulling off ! Man i hate mdf , only good for speaker box in my world . Barely at that !

Loving the plantation blinds, man. Very, very nice. I wanted those throughout the house but merciful God they're expensive!

 

[D528]

Loving the plantation blinds, man. Very, very nice. I wanted those throughout the house but merciful God they're expensive!

Thanks so much . Yep and no , i put them all around but my big living room window is wood that matched the floor kinda. The wood one from home depot the rip off palace. They said 50 bucks a sq.ft. but after clear view and all the other options it was over 100 bucks easy a s.q..2000+ for one window about 8 x 6' or what ever . i wasnt getting reamed like that again ! They installed that one though. in minutes .These white ones can get cheaper bigtime ! Those white ones have all the same options at 19 bucks a s.f. but are plastic . I got another brand too that 21 a ft. Way cheaper. hehe. Fuck depot. I couldnt even get my cove and base trim there , i wanted long pieces At 12" so only 3 scabs in whole house. . I got 1x6 and 1 x 3 pine with polplar to do the craftsman trim though . Made a router table to router the thin pieces.1\4 round bit.I'm taking trashed cheap repo made in 97 look like it was made much earlier. So far i did all wall outlets and nice switches . hardwood floor i installed and finished . subfloor is osb bullshit though. I should have changed it. Useless crap ! I painted inside and out. sprayed and rolled. just ahd roof redone. I put in a argon sliding door .All new solid doors. New decking step in front. . new overhead lights in bedroom . still gotta change out my cans. I want something nice. had a hearth made of granite for cheaper than the grey sears fake tile bullshit one that was there and put new water heater and zero clearance insert. Im slow , i gotta be hella high ingesting to stand up for awhile.Thats what i done in 3 years so far. I have to get all new closet door stil . Be awhile before they need to be in ,lol. Actaully i was really lucky money wise, the crash made me a bunch of free money with my schiester lawyers share since he quit my case 3 weeks before my s.s.i. appeal saying i had no chance of winning. .lol. Free house and all. Pay off in 7 years. lol. You gotta be one dumb lawyer to spend almost ten years on a case and quit .lol. I bought a bunch of gold and silver when it was still cheap. lol. Like 6 buck silver 600 dolla gold. cashed otu high then bought three years ago at the bottom . woot. 15 years loan. 30 percent down. I'm killing it for a suposed to be dead guy. lol. I could have paid cash for the house but knowing i was going to go off on what ever i got i kept it cheap so have enough to do it all. shit i better go to bed..................
Thanks again.....

 

[WeedFreak78]

Yeah, it's a family business and his dad did the exact same thing decades ago.

He welded some metal on both sides right behind the front mud flaps, and sand blasted/repainted the entire bottom of the car. Then he rust proofed where he repaired and poured motor oil on it.

My dad gave them all his business for body work and now I give all my business to the son, who is around my age.

So, lol, I've never seen it done any other way.

If he's using used motor oil it can accelerate corrosion. Used motor oil is highly acidic. He needs to use a lanolin wax based product to be effective. I recommend Fluid Film. Fresh kerosene, heating oil or diesel works well also.

 

[jerryb73]

18 year old Lumina with 45K miles. The kind of low mileage car you want to keep nice.
It's looks new again. My daughter loves that car.

I had an old lumina probably about the same age and that car ran better the newer cars we had around. We passed it around to whoever needed to drive it while their newer car was down.. that car was solid and ran great. Mine may have had a few more miles by like 150k but hey, who's counting..

 

[lokie]

Thanks so much . Yep and no , i put them all around but my big living room window is wood that matched the floor kinda. The wood one from home depot the rip off palace. They said 50 bucks a sq.ft. but after clear view and all the other options it was over 100 bucks easy a s.q..2000+ for one window about 8 x 6' or what ever . i wasnt getting reamed like that again ! They installed that one though. in minutes .These white ones can get cheaper bigtime ! Those white ones have all the same options at 19 bucks a s.f. but are plastic . I got another brand too that 21 a ft. Way cheaper. hehe. Fuck depot. I couldnt even get my cove and base trim there , i wanted long pieces At 12" so only 3 scabs in whole house. . I got 1x6 and 1 x 3 pine with polplar to do the craftsman trim though . Made a router table to router the thin pieces.1\4 round bit.I'm taking trashed cheap repo made in 97 look like it was made much earlier. So far i did all wall outlets and nice switches . hardwood floor i installed and finished . subfloor is osb bullshit though. I should have changed it. Useless crap ! I painted inside and out. sprayed and rolled. just ahd roof redone. I put in a argon sliding door .All new solid doors. New decking step in front. . new overhead lights in bedroom . still gotta change out my cans. I want something nice. had a hearth made of granite for cheaper than the grey sears fake tile bullshit one that was there and put new water heater and zero clearance insert. Im slow , i gotta be hella high ingesting to stand up for awhile.Thats what i done in 3 years so far. I have to get all new closet door stil . Be awhile before they need to be in ,lol. Actaully i was really lucky money wise, the crash made me a bunch of free money with my schiester lawyers share since he quit my case 3 weeks before my s.s.i. appeal saying i had no chance of winning. .lol. Free house and all. Pay off in 7 years. lol. You gotta be one dumb lawyer to spend almost ten years on a case and quit .lol. I bought a bunch of gold and silver when it was still cheap. lol. Like 6 buck silver 600 dolla gold. cashed otu high then bought three years ago at the bottom . woot. 15 years loan. 30 percent down. I'm killing it for a suposed to be dead guy. lol. I could have paid cash for the house but knowing i was going to go off on what ever i got i kept it cheap so have enough to do it all. shit i better go to bed..................
Thanks again.....

I don't think that is the wall President Trump is referring to.

 

[jerryb73]

I did do some weed eating

I usually smoke mine

 

[Bareback]

I got an Icy Hot tens unit. I got it for sciatic and hip pain. My back and hip has gotten to the point if I step wrong I got to lay on a heating pad for a couple days.

Physical therapist is a good place to start.

What price range was the icy hot.
I looked at some by that brand online as low as 29$. I have a PT that I see for 6 weeks a couple times a year and they keep my electrodes on file, do you have to replace your electrodes or is there any other equipment or supplies to replace . I'm just trying to get my head around the whole picture.

 

[420God]

Firing up the smoker today and trying out some rub we got from @Gary Goodson.

 

[WeedFreak78]

Firing up the smoker today and trying out some rub we got from @Gary Goodson.

View attachment 3913565

Figures, with a big white cock and a fat hog on the label.

 

[Indacouch]

I usually smoke mine

Nice

 

[whitebb2727]

What price range was the icy hot.
I looked at some by that brand online as low as 29$. I have a PT that I see for 6 weeks a couple times a year and they keep my electrodes on file, do you have to replace your electrodes or is there any other equipment or supplies to replace . I'm just trying to get my head around the whole picture.

Around 20-30 bucks. Wal-Mart has quit a few different models.

You can get replacement electrodes but I haven't had to buy one yet. It is one pad that is sticky. It has a plastic sheet to stick it to when done. It gets sticky again.

Icy hot has different ones for different body parts.

 

[neosapien]

Wife got a whole tea smoked duck from the Chinese grocer last night. Just warmed half of it up in the oven then broiled it in the toaster oven. It's so rich and decadent. I feel like a goddamn king eating that. I just need court jester. Hmm taking applications.

 

[WeedFreak78]

I've been up for almost 8 hours now, made breakfast, smoked a few times, wasted the rest of the time online. I think I'm going to smoke and take a nap, I'm worn out. I don't get how sitting on my ass makes me more tired than when I'm out working all day, my smoking doesn't change when I work either, so it's not like I'm burnt already.

 

[Gary Goodson]

Firing up the smoker today and trying out some rub we got from @Gary Goodson.

View attachment 3913565

Let me know how you like it. Don't be afraid to apply more as it's cooking. It's not very salty and will form a glaze if you spray it with some juice too.

 

[420God]

Let me know how you like it. Don't be afraid to apply more as it's cooking. It's not very salty and will form a glaze if you spray it with some juice too.

We're spraying and injecting apple juice into it and gave it one good coating so far. I'll keep you updated.