Clone to Flowering (LollyPopp'n)

[Lord Dangly Bits]

Here is a photo of the same Strain. This photo was taken at about week 7 of 10. I wasn't useing organic nuts back then. And I was growing them in a flood and drain system, not soil. This was the harvest that made we want to Lolly-pop. It took about 2 hours to manicure each plant. I manicured everynight after work for 5 days straight, at about 4 hours a night.
As I have made my plants smaller, and changed over to an organic soil type grow, My yield per light has stayed about the same. But the Manicureing has gotten a lot faster with less crap to throw away.

Hopeing I can manicure a lolly-pop plant in about 10 minutes.

I found a big difference in the smell and taste with Organics and a soil type grow. Highly doubt I will ever use my own Piss like some organic lovers talk about.

 

[normlpothead]

Use your "advanced" search to look at my profile pic, no camera tricks that lollypop is as big as my head. Took about 5 mins to trim.

You owe some apologies.

 

[Lord Dangly Bits]

Norm, you really need to step away from the CRACK PIPE. You Do not even know when a plant is in flowering stage or is not. Plus you do not even know what a soil grow looks like. I truely hope you remember to use condoms.

 

[Lord Dangly Bits]

Use your "advanced" search to look at my profile pic, no camera tricks that lollypop is as big as my head. Took about 5 mins to trim.

You owe some apologies.

Hey eveyone. I followed NORM's advice and looked at his profile Picture. I almost fell out of my chair laughing my ass off. This guy is just a SMACK TALKING person with no ability to grow. Click on his profile as he says to do. He has pissed off a bunch of people. Why is everyone leaveing you hate messages in your profile?

Norm, You know what they say, you are what you eat. So please stop being such a DICK to people.

 

[LoudBlunts]

LDBs are you talking about straight the lights HIGH then dropping them down low as they get older?

i wouldnt do that. you can burn the taste and thc out of your plants!!!

i normally like to back off a little bit so i dont 'burn' the taste of the plant'


i strongly think having lights too close will burn out the plant...not just in temp extremes

 

[Lord Dangly Bits]

LDBs are you talking about straight the lights HIGH then dropping them down low as they get older?

i wouldnt do that. you can burn the taste and thc out of your plants!!!

i normally like to back off a little bit so i dont 'burn' the taste of the plant'


i strongly think having lights too close will burn out the plant...not just in temp extremes

Hey there LoudBlunts, How you been, long time no see. As for moving the light down closer on my clones. I figured I would get them down to about 2 feet away at best. Hopefully these cuttings stay under 24 inches tall, but this is my first try at this method of growing. The light these new clones are under is only a 400 watter, I will not be moveing them under the 1,000 watter for about a month. You think this will be ok, or do you think I should keep the light even higher?

Thanks for coming by.

 

[Lord Dangly Bits]

Funny how when I have a serious post, I get no replies and a bunch of views...

When I signed on and acted like I grew under maglights in a cardboard box, I had 100+ replies in an hour...

Tells me that there's an awful lot of people making fun at other people instead of exchanging growing tips...

Norm, I have one simple question. If you have a great big crop going with 72 plants, then why would you lie and try and make people think you are growing in a card board box with a mag light? Could it be that you are lieing about the big grow, or are you really lieing about the card board box? As for people not answering your threads on how to Breed. There are some very good breeders on RUI, they just are picking about who they answer. They do not asnwer questions from people who are abusive and arguementitive.

 

[LoudBlunts]

Hey there LoudBlunts, How you been, long time no see. As for moving the light down closer on my clones. I figured I would get them down to about 2 feet away at best. Hopefully these cuttings stay under 24 inches tall, but this is my first try at this method of growing. The light these new clones are under is only a 400 watter, I will not be moveing them under the 1,000 watter for about a month. You think this will be ok, or do you think I should keep the light even higher?

Thanks for coming by.

if you want short squat plants... the only thing you could change in your lighting situation would be flowering with MH lights as the HPS spec makes them stretch a little bit. Move your light up or down doesnt have anything to do with keeping them short, well at least not IMO. All you would be doing is burning the flavor out.

if you want to keep cuttings under 24inches tall, i reckon you mean a finished plant under 2 ft, i suggest you throw the cutting once rooted into flower. dont veg a clone. once you see roots, throw them into flower! i cant stress this any more!

lollipopping is achieved by throwing small small clones into flower with no veg

it really doesnt have ample time to grow its branches out.

also pruning any branch that is more than 1inch long is a must, IMO.

i cut everything that is more than an inch long.

and personally....why 'prep' them for more light? stop bullshitting and just throw them under the 1k lighting

and LDB, for your original question....yea long time no speak! Im fine....hope all is well with you! I had to slow my activity on RIU down. I dont like the way things are being handled (prime example new members who act like they are ganja gods...it can clearly been seen in your thread here), the favoritism, and the newly enforced rules...especially about RIU so willingly turning info over to LEO. I post at other websites now....but im hear every so often.

 

[Lord Dangly Bits]

Loudblunt, They did go directly into flowering once they rooted. As for not going under the 1,000 watt light. I already have plants under it. They have about 5-6 weeks left until they are finished, then I will move these cutting under that light.

 

[GypsyBush]

yea long time no speak! Im fine....hope all is well with you!

Wow!
What a relief...!!!

Someone finally interrupted the BASHING...

I don't know you LB or you LDB.. but I do hope you guys are doing well...

And thanks for making our Ganja the topic again...

You guys take care and keep spreading the knowledge...

Some of us are actually interested...

Peace... said the Gypsy...

 

[LoudBlunts]

Loudblunt, They did go directly into flowering once they rooted. As for not going under the 1,000 watt light. I already have plants under it. They have about 5-6 weeks left until they are finished, then I will move these cutting under that light.

ahhh i see

 

[Lord Dangly Bits]

Nice little Bansi Gyspy, I have a friend who is into that. He makes some wild looking plants. He has braided them, made peace signs, all kinds of wild crap. He has way to much time on his hands... lol

OPPS.. Edited for spelling error.. I spelled NICE AS MICE.. Do not want someone to freak on me editing my post.

 

[GypsyBush]

Thanks man! She's 11 days into flowering...

Here are a few more pics of her and her sisters

Does your friend post here on RIU...??

I would LOVE to see his work...

Cheers...

Gypsy...

 

[Lord Dangly Bits]

Hey loudblunts. How does a MH light keep the cutting short during the first of flowering cycle? I figure you must mean for light the first 2-4 weeks or something. I know you can veg with a HPS light. But have never tried or heard of keeping clones nice and short, that have been placed directly into flowering, with a MH light.

Sorry I do not know everything. Just a few days ago I was ripped open for asking if Mercury Vapor lights could be used for anything. Heck, my bad for trying to learn something.

Edited for spelling: People also get upset when I edit post.

 

[LoudBlunts]

im not saying its solid proven theory

but HPS is known for stretching plants a little bit


MH is known for keeping plants short and squatty....more bushy almost

 

[grandpabear3]

Norm, you really need to step away from the CRACK PIPE. You Do not even know when a plant is in flowering stage or is not. Plus you do not even know what a soil grow looks like. I truely hope you remember to use condoms.

you really are my hero sometimes...

im not saying its solid proven theory

but HPS is known for stretching plants a little bit


MH is known for keeping plants short and squatty....more bushy almost

i think your right on the $ LB ....myu mums under the 400 mh GOT BUSH....nowadamean.

it can clearly been seen in your thread here), the favoritism, and the newly enforced rules...especially about RIU so willingly turning info over to LEO. I post at other websites now....but im hear every so often.
__________________
hey man....what's up with the givin info to leo stuff?????!!!!!!

is there something i could read about that? that's troubling

 

[murtymaker]

^ what are you talking about riu giving info to the leo? I've not heard of this.

 

[Lord Dangly Bits]

Hey Bugsrnme, are you talking about useing a MH light for flowering? Or for vegging?

 

[grandpabear3]

Hey Bugsrnme, are you talking about useing a MH light for flowering? Or for vegging?

no i only use it for vegging....but the reason we use em for veg is cuz they induce rapid bushy growth. substantial enough to give cuttings evry 10-14 days

 

[Lord Dangly Bits]

Ok, but these cuttings went directly into flowering once they popped roots.