copperjohn
Member
Good day fellow enthusiasts, this grow log will be following my first grow under the California Light Works 880 LED grow light. For those not familar with this light it is made up of 220ea. LED'S and also includes 2ea. UVB tubes ( 1 on each end ) to sweeten things up at the end. Up until this point I have been using a 1000w HPS setup and harvesting 2lbs. of dry bud consistantly.
My setup is as follows:
7' x 7' sealed room w/no exhaust or intake.
Bottled CO2 injection controlled by a Auto Pilot digital CO2 controller w/fuzzy logic.
Mr. Cool 9,000 Btu mini split a/c system w/heat pump.
SPT 65 litre dehumidifier hooked to a perm. drain line which drains outside the room.
Hurricane 16" programable wall mounted circulation fan.
2 ea. 8" circulation fans sitting at ground level to keep the CO2 from settling down low.
Hydrologic small boy dual cannister water filter w/the KDF filter to insure removal of chlorine/chloramine and sediments from the water supplied to the garden.
I grow in a 50/50 mix of coco and perlite with great bug and disease free results.
Last crop I tried the advanced nutrients line of nutes w/great results ( I have been using G.H. nutes up to that point with similar results at a much cheaper cost ). I am going to use G.H. nutes this time around as I have more experience with these nutes and much better availability locally here in norcal.
I run my temps between 80° and 85° with the lights on and between 70° and 75° with the lights off.
I keep the humidity around 55% - 60% during veg. ( first 4-5 weeks ) and 35% - 40% during flowering with no issues of bud mold or rought to date.
I water and feed drain to waste and remove excess within 30 minutes after feeding.
I typically grow 4ea. plants in 7 gallon smart pots
This run will be 4ea. Green Crack strain plants using seeds supplied by Crop King Seeds ( Afghan X Skunk #1 ) and the seeds are soaking as we speak....
I invite positive comments especially from anyone with experience with this particular lighting system.
Please no LED vs HID lighting controversial blah blah
Thanks for stopping by and check back often as I will be updating at least weekly with lots of pics.
My setup is as follows:
7' x 7' sealed room w/no exhaust or intake.
Bottled CO2 injection controlled by a Auto Pilot digital CO2 controller w/fuzzy logic.
Mr. Cool 9,000 Btu mini split a/c system w/heat pump.
SPT 65 litre dehumidifier hooked to a perm. drain line which drains outside the room.
Hurricane 16" programable wall mounted circulation fan.
2 ea. 8" circulation fans sitting at ground level to keep the CO2 from settling down low.
Hydrologic small boy dual cannister water filter w/the KDF filter to insure removal of chlorine/chloramine and sediments from the water supplied to the garden.
I grow in a 50/50 mix of coco and perlite with great bug and disease free results.
Last crop I tried the advanced nutrients line of nutes w/great results ( I have been using G.H. nutes up to that point with similar results at a much cheaper cost ). I am going to use G.H. nutes this time around as I have more experience with these nutes and much better availability locally here in norcal.
I run my temps between 80° and 85° with the lights on and between 70° and 75° with the lights off.
I keep the humidity around 55% - 60% during veg. ( first 4-5 weeks ) and 35% - 40% during flowering with no issues of bud mold or rought to date.
I water and feed drain to waste and remove excess within 30 minutes after feeding.
I typically grow 4ea. plants in 7 gallon smart pots
This run will be 4ea. Green Crack strain plants using seeds supplied by Crop King Seeds ( Afghan X Skunk #1 ) and the seeds are soaking as we speak....
I invite positive comments especially from anyone with experience with this particular lighting system.
Please no LED vs HID lighting controversial blah blah
Thanks for stopping by and check back often as I will be updating at least weekly with lots of pics.
Last edited: