400w Club-Show Off Your 400w Pride And Joy
- Thread starter upinchronic1
- Start date
gr865
Well-Known Member
Just posted to my journal, White Rhino and Exodus Cheese, day 24 of 12/12.
Ladies are doing fine, the WR is ahead of the EC at least by a week plus. Thinking the EC is going to take 10 to 15 extra days, unless she comes on strong between now and harvest date.
The clones are about ready to go in to 1 gallon coffee cans, going to do 12 WR and 4 EC plus keep a mother of each strain.
Ladies are doing fine, the WR is ahead of the EC at least by a week plus. Thinking the EC is going to take 10 to 15 extra days, unless she comes on strong between now and harvest date.
The clones are about ready to go in to 1 gallon coffee cans, going to do 12 WR and 4 EC plus keep a mother of each strain.
budstocker88
Member
New to site this is my first time growing indoors 3x3 tent mostly gifted clones ranging from1 week to 5 weeks under 400w hps 
gr865
Well-Known Member
Sweet, nice ladies, strains?
That's one week to 5 weeks into 12/12?
What is your medium and nutes?
GR
budstocker88
Member
The two close ups are a bubba kush and sour kush there are 4 or 5 more sour kush in tent a couple mystery strains from Bagseed medium is a mix of organic compost 70% and Perlite 30% General hydroponics nutes then clean water then cal mag and bloom nutes by botanicare and then back to th nutes
budstocker88
Member
And yes 1 to 5 weeks under12/12 I have seedlings started for next round so as they get big enough for veg box I slide another clone into flower
innerG
Well-Known Member
So, this is kind of ghetto rigged but it made sense to me at the time.
I exhaust out one side of my reflector, and leave the glass out to draw the tent air out.
In the empty 6" hole on the other side of the reflector, I added a blue LED light just to add a little extra light spectrum in - I know it's not efficient enough to make much of a weight difference, but why not? I also got a molex socket extender to center the 400w bulb better in the reflector for more even light distribution
I uploaded a quick and janky video showing the two plants and two clones I took (going to try and make seeds via rodelization)
I exhaust out one side of my reflector, and leave the glass out to draw the tent air out.
In the empty 6" hole on the other side of the reflector, I added a blue LED light just to add a little extra light spectrum in - I know it's not efficient enough to make much of a weight difference, but why not? I also got a molex socket extender to center the 400w bulb better in the reflector for more even light distribution
I uploaded a quick and janky video showing the two plants and two clones I took (going to try and make seeds via rodelization)
Last edited:
gr865
Well-Known Member
White Rhino & Exodus Cheese
Day 30 of 12/12
400W HPS
The WR and EC are doing fine in flower. Not sure why I did not get a picture of EC today when working the plants. Oh well will get one over the next few days. Their buds are getting bigger, not as fast as I would like, but they are doing fine.
WR taken today,
I will be doing some leaf tucking tomorrow and may have to remove some of the fans, not really wanting to do that though, so hoping tucking will suffice. The distance between the node was so very short that I never felt comfortable super cropping this plant and she is so short and compact. Her nugs and really stacking. I hope some of her clones make it as she will make a great SOG plant.
I posted this in my journal a couple of days ago.
Some of my clones have taken a dive. Transplanted into the one gallon Hempy buckets on 12/12/15 and they all looked ok at that point. Since then some have just totally gone down hill. Looks like over nutes at first but all were treated the same and over half are doing ok. Nutes were at .25 rate!
Just a couple of pics, more later
.
First three are WR, 4 & 6th or EC and 5th is WR
GR
Update on that journal post,
I lost three of the WR and one EC, when I pulled them from their plugs they still had some roots but they were all dead on top. They may have survived but I went ahead and replaced them with the last four plants still in the rooting trays, one WR and 3 EC's.
Here the clan, 8 WR and 8 EC.
Day 30 of 12/12
400W HPS
The WR and EC are doing fine in flower. Not sure why I did not get a picture of EC today when working the plants. Oh well will get one over the next few days. Their buds are getting bigger, not as fast as I would like, but they are doing fine.
WR taken today,
I will be doing some leaf tucking tomorrow and may have to remove some of the fans, not really wanting to do that though, so hoping tucking will suffice. The distance between the node was so very short that I never felt comfortable super cropping this plant and she is so short and compact. Her nugs and really stacking. I hope some of her clones make it as she will make a great SOG plant.
I posted this in my journal a couple of days ago.
Some of my clones have taken a dive. Transplanted into the one gallon Hempy buckets on 12/12/15 and they all looked ok at that point. Since then some have just totally gone down hill. Looks like over nutes at first but all were treated the same and over half are doing ok. Nutes were at .25 rate!
Just a couple of pics, more later
.
First three are WR, 4 & 6th or EC and 5th is WR
GR
Update on that journal post,
I lost three of the WR and one EC, when I pulled them from their plugs they still had some roots but they were all dead on top. They may have survived but I went ahead and replaced them with the last four plants still in the rooting trays, one WR and 3 EC's.
Here the clan, 8 WR and 8 EC.
dafez
Member
nice!
gr865
Well-Known Member
Just made a post to my Journal, link below. Take a look, getting close on the White Rhino and the Exodus Cheese. The clones are doing well also, except the EC has some leaf Claw, not sure about this as nothing has really change in the clone nutes.
WR
The curled leaves in the top left of the pic is not Claw, it's where the plant was pressing against the cabinet walls. The plant show no signs of Claw.
Bud shot
EC
Bud Shot
GR
WR
The curled leaves in the top left of the pic is not Claw, it's where the plant was pressing against the cabinet walls. The plant show no signs of Claw.
Bud shot
EC
Bud Shot
GR
budstocker88
Member
Been Awhile since I've been on here but finally have some plants actually starting to look good and was just curious how you all of you get the big colas I end up with a bunch of thumb size buds but no big colas just a ton of little thumb size nugs Not complaining just wondering if it's a strain thing or me just missing something
gr865
Well-Known Member
Could be strains, how are your growing, ie, lighting, space, nutes, grow medium, grow technique and the such?
I believe the amount of light per given space is the main ingredient for a successful grow. I have seen some impressive grows with CFL's, LED's, HID's and even T5's. The thing was the space they were growing in, not to large for the amount of light they were using.
Just my thoughts,
GR
budstocker88
Member
3x3 tent 400w hps bubba and sour kush are strain media is 70% organic compost and 30% perlite gh flora series nutes along with botanicare cal mag and koolbloom powder on my own toned down feeding schedule so I don't over feed
budstocker88
Member
That's what I'm working with