Just bought my first bho equipment

Flagg420

Flagg420

Well-Known Member
good clean extraction of high thc product, then evap the butane, hit the magic temp (it differs a bit strain to strain)

also, look into winterization, I can't say much more than that, as I don't do it.... i use a coffee mug warmer and infrared thermometer, my sage n sour oil likes to hit about 140ish during purge to get a nice clear amber oil that hardens n shatters... most my oil isn't so handy, stays clear n gooey... thats a temp issue...

look into winterizing, get some 190proof everclear, or similar.......
 
lmoore2680

lmoore2680

Well-Known Member
Flagg420 said:
good clean extraction of high thc product, then evap the butane, hit the magic temp (it differs a bit strain to strain)

also, look into winterization, I can't say much more than that, as I don't do it.... i use a coffee mug warmer and infrared thermometer, my sage n sour oil likes to hit about 140ish during purge to get a nice clear amber oil that hardens n shatters... most my oil isn't so handy, stays clear n gooey... thats a temp issue...

look into winterizing, get some 190proof everclear, or similar.......
Click to expand...
So I should be getting temp close to 140 I've been researching wintering but thanks I swear I'm not a dummy

Sent from my HTC6500LVW using Rollitup mobile app
 
Twitch

Twitch

Well-Known Member
lmoore2680 said:
How long in vac

Sent from my HTC6500LVW using Rollitup mobile app
Click to expand...
depends on how much oil, some places leave it in there for 4 to 5 days. The most common answer is when you can flip it and let it get up to temp and it is not reacting to the vacuum, bubbling and boiling off butane.
 
Flagg420

Flagg420

Well-Known Member
how do u make the diff. types from the point of initial purge? I only want shatter, works better in my g pen, and my rig, but haven't the knowledge in that last step refining down....
 
lawlrus

lawlrus

Well-Known Member
Please be careful. Open blasting is terrifying. I've done it thousands of times and still can't believe I'm still here to talk about it.
 
Bublonichronic

Bublonichronic

Well-Known Member
lawlrus said:
Please be careful. Open blasting is terrifying. I've done it thousands of times and still can't believe I'm still here to talk about it.
Click to expand...
Iv been doing if for close to five years, with a little common sense it's really not that terrifying....but you should go buy a cls asap lol
 
lawlrus

lawlrus

Well-Known Member
Bublonichronic said:
Iv been doing if for close to five years, with a little common sense it's really not that terrifying....but you should go buy a cls asap lol
Click to expand...
I agree that common sense takes you a long way, but the nature of the exercise does not lend itself to safety at all. One spark is all it takes -- I have too much to lose to take a risk like that on a regular basis. Not judging, just saying. I don't make oil much at all anymore, but if I was still doing quantity I would definitely have a CLS, no question about that.
 
GhostBud420

GhostBud420

Well-Known Member
Open is definitely more dangerous.. The process that I go through to open blast is extensive.. Dewaxing can be a pain.

Going Closed.
 
Bublonichronic

Bublonichronic

Well-Known Member
Iv literally smoked a cigarette right next to a pool of butane, no explosion, just sayn...even tho that is obvioulsy a bad idea and I'm not saying do it but.don't buy the hype
 
lmoore2680

lmoore2680

Well-Known Member
That's just it for me it is a process have to be careful and follow every step as if it's your last. And once I figure out the chemistry of this I WILL look into cls with a return system guys understand, I'm no newbie I know how dangerous this can be

Sent from my HTC6500LVW using Rollitup mobile app
 
You must log in or register to reply here.
Top