Chillin' with WhoDat

WHODAT@THADOR

WHODAT@THADOR

Well-Known Member
So I figured I would start a thread for whatever is getting your Mad Scientist Rock's off? What's your latest Experiment's? Something people can have input on seemingly impossible endeavor's or just share their experience's in there science experiment.....Whatever it is your doing share it it does not matter if it's something new or not:

I'm in the process of making a P. Cyan Liquid Culture,,,,,

I used Premium Silicone Glue it's got a temp rating of 400 degree's to seal my hole I made with a nail in jar cap
IMAG0347.jpg IMAG0341.jpg IMAG0339.jpg

You will definitely need all these product's to complete the job:wink::-P:wink:
1409526652693.jpg IMAG0342.jpg
Pot Cookies for good measure:eyesmoke:
1409532154789.jpg
Mix 1/2 tsp Karo light syrup with water in jar
1409530262644.jpg
PC for 1 hour
1409532262645.jpg
Nice Golden color not too much Caramelizing of the syrup ....Look's like a good jar so far
IMAG0348.jpg
Waiting till tomorrow to inoculate:weed:bongsmilie:weed:
 
Last edited:
WHODAT@THADOR

WHODAT@THADOR

Well-Known Member
I used 91% ISO Propyl Alc. Had Paper towel soaked in it to wipe port off and use to cool and further sterilize tip of needle...
1409605446277.jpg
Heated my needle(Red hot where I plan on Breaking the integrity of the jar), Cooled(Iso) then injected
IMAG0351.jpg IMAG0350.jpg
Guess, I'll wait a few days....Somebody else has gotta have something cool goin on?
 
rory420420

rory420420

Well-Known Member
im collaborating on making some molly..i got pics,but cant share,says the cook.but,it happening..and tottaly fucking cool..
Okallright said:
What shit thread, go back to war we're your not as uselessuseless
Click to expand...
yea dude,probably not a good idea to pull up in the hood and announce to everyone their moms a trick...good way to find out whats glass,and jaw...
 
WHODAT@THADOR

WHODAT@THADOR

Well-Known Member
rory420420 said:
im collaborating on making some molly..i got pics,but cant share,says the cook.but,it happening..and tottaly fucking cool..

yea dude,probably not a good idea to pull up in the hood and announce to everyone their moms a trick...good way to find out whats glass,and jaw...
Click to expand...
Never tried making my own or even looked it up ...Kick the cook's ass LMFAO:clap:bongsmilie...That does sound cool actually, maybe I'll research that
 
Mike Clark

Mike Clark

Member
hybridization is a deep topic, and very hard. It's not possible to cross strains of the same species, as a hybrid is a cross between two different species within the same genus, not two different strains. The only thing that is possible with two strains of the same species would be genetic mutations. For example albino penis envy was created by creating a homozygous mutation of PF albino + PE. this is a difficult process and probably not something I would even attempt, honestly.

Not to say that I couldn't, its just very tedious work. Although I have considered a simple approach to breeding mutations. It's just a theory at this point ;)
 
WHODAT@THADOR

WHODAT@THADOR

Well-Known Member
Mike Clark said:
hybridization is a deep topic, and very hard. It's not possible to cross strains of the same species, as a hybrid is a cross between two different species within the same genus, not two different strains. The only thing that is possible with two strains of the same species would be genetic mutations. For example albino penis envy was created by creating a homozygous mutation of PF albino + PE. this is a difficult process and probably not something I would even attempt, honestly.

Not to say that I couldn't, its just very tedious work. Although I have considered a simple approach to breeding mutations. It's just a theory at this point ;)
Click to expand...
I'm interested in your theory how's it work?
 
Mike Clark

Mike Clark

Member
There are 3 different types of genetic mutations. Dominant, incomplete dominant (or sometimes co-dominant pretty much the same), and recessive.

When using the word mutation its easy to imagine something like PE. Mutation in this sense means mostly changes in color, not really shape (though I am sure there are more mutations like PE to be discovered).

Dominant mutations are not common with mushrooms. One incomplete dominant mutation that we know of is leucism (albino a+). An example of recessive mutations in cubes is PE and Albino PF. PE can revert back to a normal mushroom, which means that it lost a copy of the mutation on a DNA allele, and became heterozygous. This is how we know it is recessive, as it is an unusal type.

This is a very basic and unorganized description of genetics. If you are already familiar with this, then you already know ;)

So lets say we wanted to create a leucistic version of penis envy. This would be possible by isolating one spore of both specimens, the PE, and the Albino A+, then pairing them together until we saw dikaryotic myelium. The resulting mushrooms will all be heterozygous for leucistic penis envy. These mushrooms will not be white, nor will they look like PE at all. They will generally look like normal cubes. However, they are halfway there. All we have to do at this point is take spore prints from two fruits on the same flush, and repeat the procedure of obtaining a single spore from both prints and pairing both spores until dikaryotic mycelium has formed. The resulting fruits will be white PE with purple spores.

So you can see how it might be extremely hard to isolate two spores from a kagillion that is on the spore print. We need an easier way. My theory is not exactly precise. Its more like kicking in a door and spraying a room with a shotgun loaded with buckshot, hoping we hit something. But I think it will work. I'll get more into the actual process at another time when I actually attempt it.
 
WHODAT@THADOR

WHODAT@THADOR

Well-Known Member
Mike Clark said:
There are 3 different types of genetic mutations. Dominant, incomplete dominant (or sometimes co-dominant pretty much the same), and recessive.

When using the word mutation its easy to imagine something like PE. Mutation in this sense means mostly changes in color, not really shape (though I am sure there are more mutations like PE to be discovered).

Dominant mutations are not common with mushrooms. One incomplete dominant mutation that we know of is leucism (albino a+). An example of recessive mutations in cubes is PE and Albino PF. PE can revert back to a normal mushroom, which means that it lost a copy of the mutation on a DNA allele, and became heterozygous. This is how we know it is recessive, as it is an unusal type.

This is a very basic and unorganized description of genetics. If you are already familiar with this, then you already know ;)

So lets say we wanted to create a leucistic version of penis envy. This would be possible by isolating one spore of both specimens, the PE, and the Albino A+, then pairing them together until we saw dikaryotic myelium. The resulting mushrooms will all be heterozygous for leucistic penis envy. These mushrooms will not be white, nor will they look like PE at all. They will generally look like normal cubes. However, they are halfway there. All we have to do at this point is take spore prints from two fruits on the same flush, and repeat the procedure of obtaining a single spore from both prints and pairing both spores until dikaryotic mycelium has formed. The resulting fruits will be white PE with purple spores.

So you can see how it might be extremely hard to isolate two spores from a kagillion that is on the spore print. We need an easier way. My theory is not exactly precise. Its more like kicking in a door and spraying a room with a shotgun loaded with buckshot, hoping we hit something. But I think it will work. I'll get more into the actual process at another time when I actually attempt it.
Click to expand...
They don't have a viscous type solution available maybe? Assuming your using a big clean room....Seem's like you got the hookups!!:p That would maybe help in keeping your spore's isolated and more immobile under a scope? Would something like Methyl Cellulose get the job done easier or would it damage the spore's?
 
yktind

yktind

Well-Known Member
WHODAT@THADOR said:
So I figured I would start a thread for whatever is getting your Mad Scientist Rock's off? What's your latest Experiment's? Something people can have input on seemingly impossible endeavor's or just share their experience's in there science experiment.....Whatever it is your doing share it it does not matter if it's something new or not:

I'm in the process of making a P. Cyan Liquid Culture,,,,,

I used Premium Silicone Glue it's got a temp rating of 400 degree's to seal my hole I made with a nail in jar cap
View attachment 3243379 View attachment 3243383 View attachment 3243386

You will definitely need all these product's to complete the job:wink::-P:wink:
View attachment 3243389 View attachment 3243390
Pot Cookies for good measure:eyesmoke:
View attachment 3243391
Mix 1/2 tsp Karo light syrup with water in jar
View attachment 3243392
PC for 1 hour
View attachment 3243393
Nice Golden color not too much Caramelizing of the syrup ....Look's like a good jar so far
View attachment 3243401
Waiting till tomorrow to inoculate:weed:bongsmilie:weed:
Click to expand...

Right on, Man. I did a liquid culture of some cubes a while back. Still have a couple spore prints that I made. Hrmmm, is it shroom season?
 
WHODAT@THADOR

WHODAT@THADOR

Well-Known Member
yktind said:
Right on, Man. I did a liquid culture of some cubes a while back. Still have a couple spore prints that I made. Hrmmm, is it shroom season?
Click to expand...
Gettin a little late in the season my way......But all we have anyway's are are trashy P. Sub...Mid Aug to Mid Sep around me depend's on the weather...Comin up on Oyster season though ain't it....
 
You must log in or register to reply here.
Top