Doc's Grow. A little bit of everything XD

~Dankster~420

Well-Known Member
Here's our Marie's Sapphire (purple pheno) drying & curing. ;) yours look super good :) to PIC_2124.JPG PIC_2011.JPG PIC_2028.JPG
See I grow for NIKE LMAO Strange thing is my crystals didn't look near as good as a lot even my buddies white widow but this shit here i dunno knocked me on my ass.. ITS like well after you smoke if you sit your done if your up walking bike riding your good. but do not close your eyes cuz your a goner View attachment 3171490View attachment 3171491 Not bad for first grow harvest cure
 

~Dankster~420

Well-Known Member
making that budder uh bro? haha :) looking great!! :clap:
View attachment 3172444The first cool always looks like you have so much more than after you purify it =( I actually started with 4 lbs of butter. The final is usually over half what you start with. Without some kind of press for the green after there is just so much you can get out with a cheese cloth.
View attachment 3172445A few brown dots left on top so I'm going to purify it again. The more brown you get out of your butter, then cleaner the taste and you of course have higher potency.
View attachment 3172446 Side view. I should just be able to lift the butter block and scrape any remaining brown off the bottom before melting it down again.

Anyone have any awesome treat recipes you would be willing to give up? So far I'm doing brownies (of course), apple jack treats (with a secret ingredient I will reveal for a recipe trade :P), and fruity pebble treats for Roo. I'm also considering doing thc apple pies made to order. Think they would be a hit? What do you think a fair price would be? $20-$30?
 

DrKingGreen

Well-Known Member
Almost looks like a Mg problem to me, and I've found that a lot of strains need more than FF has. My BOG had the same coloring and leaf issue so I hit her with a heavy dose of Magical and she was better. Also, I blieve Mg locks out with too high a ph. How far away are your lights? If they're close I would say that's the sativa pheno, but the leaves look similar to mine
This the the bubble gum see the burn? It happened rite when I transplanted into FFOF
 

DrKingGreen

Well-Known Member
I see, I see. ;) I have a BG cross going now.. Going to cross x's Bubba Kush, then cross x's White Widow, then to a Blue Widow. :) calling her "Blue Venom" . :)
I absolutely love the structure of the strain thus far. If it smokes like the BG I used to smoke, I'm going to cross it with the Blue Dream. I think that would make for an amazing smoke and plant structure + yield.
 

DrKingGreen

Well-Known Member
100_1326.JPG
Just finished getting my Vortex S-line 8" set up. My opinion on this fan is VERY HIGH as of now. It makes the same noise as my 6" but is a lot stronger. The 6" S-line was even more quiet. I would definitely recommend it for anyone needing extra stealth.
100_1328.JPG
The split is a 8"-6"-6" Y. ADT had the brilliant idea of using two 6" filters instead of buying a new $200 8". Waiting now to see the temp drop with one 600w in there. I'll be putting another in tomorrow and waiting until flower for the 3rd. Hopefully the extra 300 cfm's is enough to get my temps down and add that 3rd light without issue. If not I'm putting another whole in the ceiling and running the 6" and 8" and adding a 4th 600w for flower. This tent is about to get the party started!
Now, time to shower this fiberglass off since my dumb ass decided to crawl around in the attic with no shirt on. So damn dumb lol
 

radicaldank42

Well-Known Member
Lol
View attachment 3174303
Just finished getting my Vortex S-line 8" set up. My opinion on this fan is VERY HIGH as of now. It makes the same noise as my 6" but is a lot stronger. The 6" S-line was even more quiet. I would definitely recommend it for anyone needing extra stealth.
View attachment 3174304
The split is a 8"-6"-6" Y. ADT had the brilliant idea of using two 6" filters instead of buying a new $200 8". Waiting now to see the temp drop with one 600w in there. I'll be putting another in tomorrow and waiting until flower for the 3rd. Hopefully the extra 300 cfm's is enough to get my temps down and add that 3rd light without issue. If not I'm putting another whole in the ceiling and running the 6" and 8" and adding a 4th 600w for flower. This tent is about to get the party started!
Now, time to shower this fiberglass off since my dumb ass decided to crawl around in the attic with no shirt on. So damn dumb lol
Dude i do the same thing haha just dont thibk hust do it on spurr of the moment lawls. And my lights are as high as they can go. Ill show you in a sec. And idts cause i alwasy use a 1/4 tsp of Epsom salt andncalimagic
 

radicaldank42

Well-Known Member
I throw that into my compost tease that I brew for like two three days. I just ordered another worm factory from uncle jims worm farm due to me switching from pots to grow beds im just gonna start top dressing the shitt outta it it withj worm castings lol mixed with the high phosphorous sunleaves bat shit for flower bam! explosion!!!
 

DrKingGreen

Well-Known Member
That nute tea recipe of mine makes them fucking explode! Its insane the growth they get after feeding day. I'm just feeding every time from now on, screw it. Not sure if you should add the epsom into the tea, but I don't know. Don't high salt levels kill off microbes? And I found last time that adding magical after brewing works significantly better than before. No real advantage to brewing an already bioavailable nute. How much are those worm farms? They take care of themselves pretty much?
I throw that into my compost tease that I brew for like two three days. I just ordered another worm factory from uncle jims worm farm due to me switching from pots to grow beds im just gonna start top dressing the shitt outta it it withj worm castings lol mixed with the high phosphorous sunleaves bat shit for flower bam! explosion!!!
 

AllDayToker

Well-Known Member
I made my worm bin out of a tote. Only thing I had to buy was the worms.

The systems with the trays are nice and makes the whole process easier, but it's pretty easy to just cut a whole in a tote lid and throw a screen over it. My worms I just got are loving it.
 

AllDayToker

Well-Known Member
hmmm true but the thing I ordered also collects the super worm tea a the bottom
Many people refer to the drainage from the bottom of the bin as "worm tea" as you said, but it's actually leachate. It's highly concentrated and can be toxic to your plants.

If your keeping your worm bin at the proper moist levels, there is no need for this drainage. Most people just put them there for safety, but companies that sell expensive bins like those will turn it into a spout and say it's a worm tea.

You can use it at your own risk. I'm sure you can use it without harm but your at risk using it compared to dumping it.

Just use the good compost in the bin with some molasses and make a microbe/ewc tea, that's all your plant needs.
 

radicaldank42

Well-Known Member
hmm, then what about brewing worm tea? also the liquid form I would recommend 1/2 teaspoon if that
something to do differently
 

AllDayToker

Well-Known Member
hmm, then what about brewing worm tea? also the liquid form I would recommend 1/2 teaspoon if that
something to do differently
I don't know if by "worm tea" you are referring to a microbe tea/earth worm casting tea/compost tea. You brew these by using a 1/2 cup to a cup of wormcastings/vermicompost per gallon of water and 1/2 tbsp to a tbsp of molasses per gallon water. Aerate for 48 hours minimum.

This is simply for adding to the micro organism population in your soil. You only get trace amounts, if any, of things like NPK. Teas like these are a lot different the nute teas.

For the drainage that you will get at the bottom at your bin, I would suggest just dumping it down the drain, or into your compost pile outside if you have one.
 
Top