Wyogrow's 1st official grow "Bag Lady"

Hard to believe these little ones are only three weeks old from germ. The nute burn seems to be fading rather quickly and at that, the extent of the burn was minimal. Oh well.... more filler and less killer in my next seedling soil batch.

The Purple Widow seeds are a disapointment.... only 3 out of 20 have germinated. But they were free. Was figuring since I do have all the gear to run DWC I might as well use it. So if I get these 3 PW seeds to take off I'll grow them in a coco/perlite/vermiculite mix in a root pouch "drain to waste" style and use up my synthetic nutes.
 

Attachments

  • phone 007.jpg
    phone 007.jpg
    54.9 KB · Views: 23
  • phone 009.jpg
    phone 009.jpg
    51.2 KB · Views: 24
  • phone 011.jpg
    phone 011.jpg
    52.1 KB · Views: 25
  • phone 005.jpg
    phone 005.jpg
    30.2 KB · Views: 13
  • phone 001.jpg
    phone 001.jpg
    53.8 KB · Views: 14
  • phone 004.jpg
    phone 004.jpg
    31.9 KB · Views: 5
Yeah, I am going to have to raise my veg light when I bring them in tonight!!!! Pretty cool if I may say so myself. Yesterday the "leggier" plant was a full inch taller than my "squatier" plant. This morning they are neck in neck!!! I am waiting to repot until I see roots at the bottom of the starter container. But am getting antsy.... may get called back to work any time now and I know they won't go another full 2 weeks in their current containers. So they might be in root pouches by tonight.

I popped a pre-germed Purple Widow bean with a good taproot into a pre-soaked rockwool cube yesterday. Low and behold a 1" sprout was waiting for me this morning. So under the veg light it goes. My "mini humi dome" set up is pretty ghetto. Each cube in it's own little plastic party cup then the cup is in a sealed ziploc. Pre-soaking another cube right now in prep for the other germing bean showing a good taproot. Pics to come.....
 
They grow fast.... transplanted them into their permanent homes today. Hell, in another week or so I'll be performing dirty dirty bondage on them at this rate.
 

Attachments

  • phonie 001.jpg
    phonie 001.jpg
    56.9 KB · Views: 23
  • phonie 003.jpg
    phonie 003.jpg
    52.7 KB · Views: 17
  • phonie 005.jpg
    phonie 005.jpg
    58.8 KB · Views: 18
  • phonie 007.jpg
    phonie 007.jpg
    113.8 KB · Views: 18
  • phonie 009.jpg
    phonie 009.jpg
    104.1 KB · Views: 23
  • phonie 011.jpg
    phonie 011.jpg
    81.9 KB · Views: 16
Busy day yesterday. Got the cabinet rewired and cleaned up. Moved the puck fans around. Move one to the roof of the cab for an additional exhaust to help out the 4" inline. Moved the other puck fan to blow from the lower chamber up into the flowering chamber. Left the T5's on all day and the max temp was 95. Not bad given the ambient temp in the garage was 90...

The pic of the seedling in the rockwool is the only 1 out of 20 Purple Widow seeds that sprouted... what a disappointment even if they were freebie seeds. I'm going to grow this one out in coco/perlite drain to waste style with GH nutes. I have them, might as well use them.

Now..... the 3 Snow White beans I soaked all cracked and produced good tap roots. Those are them in the pic on the wet paper towel. These will grow in soil. They are now in the blue party cups to sprout.
 

Attachments

  • phoob 018.jpg
    phoob 018.jpg
    67.1 KB · Views: 9
  • phoob 019.jpg
    phoob 019.jpg
    78.8 KB · Views: 10
  • phoob 032.jpg
    phoob 032.jpg
    27.2 KB · Views: 10
  • phoob 033.jpg
    phoob 033.jpg
    22 KB · Views: 10
  • phoob 038.jpg
    phoob 038.jpg
    40.7 KB · Views: 10
  • phoob 042.jpg
    phoob 042.jpg
    36.4 KB · Views: 15
  • phoob 044.jpg
    phoob 044.jpg
    37.5 KB · Views: 12
  • phoob 046.jpg
    phoob 046.jpg
    29.7 KB · Views: 13
I think I managed to kill one.... damnit!!!! I am "mainlining" one plant so day before yesterday was topping time. It responded well to having 4 of it's 6 nodes lopped off. The other I am trying FIMing and super cropping. Well the one destined to be mailined is burnt to shit this evening. Normal this morning..... burnt leaf edges over say 45% of the leaves. The got a shot of fungal teal this morning.... but there shouldn't be enough nitrogen in a fungal tea to burn a plant that fast. Oh well..... live and learn. The FIMed plant look normal, got the same tea treatment.... no reaction so far. The solitary Purple Widow seed that made it is progressing. It's not in it's first application of Coco/vermiculite/perlite.


...... fuck I'm high
 
Time for a update..... for anyone who is tagging along.

The burnt plant dropped all of it's big leaves and I thought it was a goner for sure. But all of the burn was on the bigger leaves and other than looking heavily manicured, the plant looks to be bouncing back. I've move the plants to the floor of the cab to see if I can get them to stretch a little. They had been up on buckets to get them close to the light. I need the stretch in order to have branches long enough to train.... I guess a buttload of T5 light keeps em' squattie.

The plant destined for FIMing and Super Cropping looks like a little green beast. Healthy and super dense.... but short and compact. This isn't all bad since I am after all growing in a cabinet. The two established plants I have going from bagseed presumably came from the same plant. Definitely wild to see two distinct growth patterns from seed of the same mother. The "mainliner" seems to be doing all of it's growth from the tips. Even after being topped back to the 1st true node the new growth is exactly where it should be. Hormones redirected to the new main tips. And that's it. But on the green monster after I FIMed the plant responded by growing everywhere.... I'm still getting a handle on the vocabulary but all the potential mains growing at each node took off after I pinched out the main stem. Not just two where I FIMed.

The baby is the lone Purple Widow seed to make it..... shit seed and possible fungus issues. The beans in the cup are Blue Rhyder..... 7 Blue Rhyder beans. Going to be giving Rapid Rooter plugs a shot on 4 of them and rockwool. The ones going in the Rooters are destined for soil. The other 3 are going in Coco/perlite/vermiculite fed with GH nutes like the Purple Widow.

I'm not going to bother flipping the big ones to flower to see if they are male or female. I'll veg for a total of 10-12 weeks and then flip them and see what happens. Male of female they are both cannabis..... so I am learning as they grow. Gives me a chance to try training techniques, will give me a feel for how my version of "super soil" works with MJ and it'll give me a chance to try my hand at cloning. If they are both male... oh well. I'll save the pollen from the best grower and keep on keepin on until I get a batch of ladies.
 

Attachments

  • phonion 004.jpg
    phonion 004.jpg
    88.4 KB · Views: 10
  • phonion 005.jpg
    phonion 005.jpg
    69.9 KB · Views: 9
  • phonion 001.jpg
    phonion 001.jpg
    60.8 KB · Views: 9
  • phonion 008.jpg
    phonion 008.jpg
    42.6 KB · Views: 9
  • phonion 010.jpg
    phonion 010.jpg
    31.9 KB · Views: 8
Well plans do change....

Our indoor/outdoor assclown of a tom cat decided yesterday was a good day to ambush me while working in the cab. Knocked over my FIMed plant and broke the main stem between the 1st & 2nd node. I guess that was his way of saying "mainline this one too". But the upside is I got 6 nice clones off the broken top. And wish me luck but I do believe this is a female plant. Saw very distinct pistil-like looking hairs at the nodes. But won't know for certain till I flip it to 12/12.
 
Clones seem to be holding up. A little wilted..... but not shriveling up. 3 are destined for soil, 3 for coco/perlite/vermiculite. Not one of the Blue Rhyder seeds cracked. All turned to mush inside. I dropped some Bubblegun beans in H2O a couple days ago... 3 out of 5 cracked and are in rockwool. Tomorrow will be the 72 hour mark so I have hopes the other 2 will crack. Will probably run 3 in soil and 2 in my coco mix. Seems my hardest time so far is just getting the damned seeds sprouted. I can get most to crack but almost all of them don't produce sprouts. The seed just rots inside. Really pissing me off because I don't have this abysmal rate of success with any other plant....
 
even with the complications u still gotta nice grow! especially with 6 new clones ;) i was told to always use half or less of wat any nutrient bottle says, and increase wen needed working up to fullstrength. good luk
 
do u have the 2g11 base duotube bulbs? what r they? im using 3x 3000K 40 watters to add some help to my 150w hps for flowering. how do u like them so far?
 
Thanks LetsMakePot, Right now I am using 4x6500k daylights and 2x12000k PowerChrome (for the extra blue). When I flip to flower I'll swap the 12000k bulbs out for 2 AquaSun "Redsun" bulbs for the reds they like in flower. Toying with the idea of adding in 2 reptile UV power compact bulbs, but havent made up my mind yet. The fixture does crank out some light though. Enough so to throw off the kind of interference you get taking a pic with halides or HPS lights on. The nutes I started out with on the Purple Widow I just stuck with. The little plants has powered through the nute burn and is now looking like it needs more nutes. Unless for some reason the coco plants just do so remarkably better I'll go 100% soil once my hydro nutes are used up. The "cat cropped" plants seems no worse for the wear with it's new haircut. The other, which was already being pruned and trained to mainline is taking to it's mild bondage like a true perv..... With them being in 2 gallon pots I can't go for as many colas as Nugbuckets does. But I am going to try and go for 8 mains.
 

Attachments

  • phoon 002.jpg
    phoon 002.jpg
    31 KB · Views: 22
  • phoon 004.jpg
    phoon 004.jpg
    34.4 KB · Views: 14
  • phoon 005.jpg
    phoon 005.jpg
    61.4 KB · Views: 16
  • phoon 008.jpg
    phoon 008.jpg
    39.2 KB · Views: 13
  • phoon 009.jpg
    phoon 009.jpg
    40.1 KB · Views: 18
  • phoon 011.jpg
    phoon 011.jpg
    46.4 KB · Views: 18
  • phoon 013.jpg
    phoon 013.jpg
    60.4 KB · Views: 19
The three Bubblegun seeds have sprouted. 2 are up and working on their first set of true leaves. An exciting prospect because i have smoked this strain before and love it. Blocks out enough pain to get me up and productive but doesn't cloud me up and make wonder WTF I am doing every 30 seconds. One of the seeds never cracked and squished under light pressure. The 4th was just starting to crack so I popped it in a Rapid-Rooter plug for shits and grins. The clones haven't shown roots out of the bottom of the Rapid-Rooter plugs yet but they haven't shriveled up either... so they must be doing their thing.
 
Hi Wyogrow ... I just found this. I like T5s as well. Have you encountered the "LED without LEDs" thread? It's a long read but full of excellent info for using the aquarium bulbs to build a fixture with a most efficient output spectrum. cn
 
I read that thread start to finish..... I've kept reef aquariums for almost a decade. So the info I got off it was well received by me because I already had all of the bulbs to play with.
 
4th Bubblegun seed has sprouted. I fooked up and didn't check it yesterday and I found a 4 inch sprout looking for light this morning. So 4 out of 5 Bubblegun beans made it. Much happier with these results. All 4 are in soil and doin their thing. One of my "Bag Lady" clones had a shit ton of roots this morning as well. It got upgraded to a 4" square pot. Going to run it in my coco/vermiculite/perlite blend on bottled nutes.
 
The Bubblegun's are off to the races. The Bag Lady clone I transplanted to coco has perked up. Getting into some kinky bondage with one of my big plants now. Not decided on going for 8 mains or just 4. No sense in getting greedy. The DIY veg light has served it's purpose well but it's getting swapped out for a old 6 bulb T5 aquarium fixture shortly. There is a pic of the clones.... obviously no dying. Another is putting out roots today. It'll go into soil tomorrow. I am fixin to have a cabinet full of green....
 

Attachments

  • phooniuos 006.jpg
    phooniuos 006.jpg
    42.3 KB · Views: 7
  • phooniuos 008.jpg
    phooniuos 008.jpg
    88 KB · Views: 5
  • phooniuos 002.jpg
    phooniuos 002.jpg
    29 KB · Views: 8
  • phooniuos 003.jpg
    phooniuos 003.jpg
    41.5 KB · Views: 5
  • phooniuos 009.jpg
    phooniuos 009.jpg
    44.3 KB · Views: 5
  • phooniuos 011.jpg
    phooniuos 011.jpg
    40.5 KB · Views: 5
  • phooniuos 014.jpg
    phooniuos 014.jpg
    39 KB · Views: 7
  • phooniuos 017.jpg
    phooniuos 017.jpg
    62.1 KB · Views: 6
  • phooniuos 016.jpg
    phooniuos 016.jpg
    74.7 KB · Views: 7
not even flowering yet and my garage smells like a cat pissed on a skunk who's shitting under a pine tree..... I have a serious need to up my odor control. I have a carbon scrubber but it's not hooked up now to save a little life on the carbon. My other vent outlet is rigged to flow through a bucket with a shelf in it and holes perforating the bottom. The shelf is for a Ona Block and a couple boxes of baking soda.
 
Back
Top