Wpm mid flower

budsfordayz

budsfordayz

Well-Known Member
got wpm mid flower on 1 plant and late flower on another. Temps are getting really cold at night so the dew is getting them good. Need advice should I just scrap the plant in mid harvest and harvest the late one or wait it out? I sprayed sulpher spray a day before the pics were taken seems to have gotten more white.

What a disaster. Can this be salvaged?
 

Attachments

  • 28322A0B-E166-4D3E-9B0B-48D11F9B92E9.jpeg
    28322A0B-E166-4D3E-9B0B-48D11F9B92E9.jpeg
    1.7 MB · Views: 42
  • 6FC6AF3B-EF6A-4BAD-8442-FC1A6277F4D0.jpeg
    6FC6AF3B-EF6A-4BAD-8442-FC1A6277F4D0.jpeg
    2 MB · Views: 41
  • AAB86DC2-D621-44E3-9EA3-0517A6A7D06D.jpeg
    AAB86DC2-D621-44E3-9EA3-0517A6A7D06D.jpeg
    1.8 MB · Views: 40
  • 3DA5ADEB-C09A-4771-8EDA-8444959CB43D.jpeg
    3DA5ADEB-C09A-4771-8EDA-8444959CB43D.jpeg
    1.7 MB · Views: 40
Remove any leaves that are too damaged. Move to shaded area or wait till late evening. Wipe off as much mildew as you can with a wet cloth... top to bottom. Blast plant with water. All angles... tops... bottoms... everywhere. If you have any pests, now would be a good time to spray every inch with insecticidal soap or dawn dish soap and water. If you sprayed with soap, rinse after 1 hour. Then spray with neem oil and water or azamax and water (I like to add some potassium silicate for an emulsifier). Repeat every 5 days or as necessary up to 2 weeks before harvest.
​
There are lots of "solutions" for this, the above it what's worked for me in the past. I never had a WPM infection that was too bad to control though so I never had to go nuclear.

Increase air flow to your plants. Remove dead/damaged plant material, clear out some of the inside leaves, remove leaves that are touching too much.

WPM is in your plant now, so from my experience it will come back if your airflow/condensation isn't in check.
 
friedguy said:
Remove any leaves that are too damaged. Move to shaded area or wait till late evening. Wipe off as much mildew as you can with a wet cloth... top to bottom. Blast plant with water. All angles... tops... bottoms... everywhere. If you have any pests, now would be a good time to spray every inch with insecticidal soap or dawn dish soap and water. If you sprayed with soap, rinse after 1 hour. Then spray with neem oil and water or azamax and water (I like to add some potassium silicate for an emulsifier). Repeat every 5 days or as necessary up to 2 weeks before harvest.
​
There are lots of "solutions" for this, the above it what's worked for me in the past. I never had a WPM infection that was too bad to control though so I never had to go nuclear.

Increase air flow to your plants. Remove dead/damaged plant material, clear out some of the inside leaves, remove leaves that are touching too much.

WPM is in your plant now, so from my experience it will come back if your airflow/condensation isn't in check.
Click to expand...

Ok so I noticed everywhere I sprayed looks white now.... I sprayed it with 12% sulfer at a 35ml to one gal water mixture. The white spots don’t look like powder mildew more like a residue. What are the chances it’s just the sulpher on my leaves? As u can see from the pic there is just little spots now before leaves were covered. So Wierd
 
I've heard sulfur works well on PM, but I've yet to see it. My dad burned it when he grew indoors and it sure got rid of his thrips, but he never could get the PM under control. Burning is more effective than spraying.

Still looks like PM to me. Wipe it off. If it comes back you know what it is.
 
friedguy said:
I've heard sulfur works well on PM, but I've yet to see it. My dad burned it when he grew indoors and it sure got rid of his thrips, but he never could get the PM under control. Burning is more effective than spraying.

Still looks like PM to me. Wipe it off. If it comes back you know what it is.
Click to expand...

Yea it is a mix a both now... did ur dads buds smell and taste like sulfer ? My plant reaks now and I’m worried
 
Rinse the sulfur off and spray with sodium bicarbonate. You can add a little olive oil (or any vegetable oil), and maybe a bit of dish soap (I use safer's insecticidal soap, but it has a bit of a smell too), or you can get something like Green Cure.
Took care of my powdery mildew, and I'm using it as a preventive for botrytis on the recommendation of a grower in my region.
You can also do what Jorge Cervantes does and wash your buds at harvest, especially if you want to keep using sulfur.
 
CanadianJim said:
Rinse the sulfur off and spray with sodium bicarbonate. You can add a little olive oil (or any vegetable oil), and maybe a bit of dish soap (I use safer's insecticidal soap, but it has a bit of a smell too), or you can get something like Green Cure.
Took care of my powdery mildew, and I'm using it as a preventive for botrytis on the recommendation of a grower in my region.
You can also do what Jorge Cervantes does and wash your buds at harvest, especially if you want to keep using sulfur.
Click to expand...

The sulfer will wash out? We’re did u get green cure in Canada!? I swear it’s not regulated here no hydro shops carry it
 
I bought potassium bicarbonate, the guy near me who bought Green Cure got it from the american amazon. I can see how it looks like I said I used Green Cure though. Potassium bicarbonate is the active ingredient in Green Cure, like 85% or something. I got it on amazon.ca.
If you use either of them at full strength they will turn your pistils brown, but new ones will still be white. I use it at half to a quarter strength, and my pistils seem to be fine.
After looking it up, I'm not sure if the sulfur will wash off, as it's listed as insoluble in water. I also don't know how it might react with potassium bicarbonate, I'm not a chemist lol.
 
God I hate pm... I just found one of my outdoor plants is covered with it. A week before harvest.

I’ve tried treating it in the past but there’s always a lingering doubt that ruins the experience. You have to cut your losses when it comes to pm.
 
Clink78 said:
God I hate pm... I just found one of my outdoor plants is covered with it. A week before harvest.

I’ve tried treating it in the past but there’s always a lingering doubt that ruins the experience. You have to cut your losses when it comes to pm.
Click to expand...

That’s exactly what I did gunna harvest and take only the unaffected upper buds as for the infected parts...straight into the garbage
 
You must log in or register to reply here.

Similar threads

D
Best thing I’ve ever seen for white powdery mildew
Replies
12
Views
918
Tmik
Tmik
D
18/6 light cycle, plants started flowering. How to reverse and keep in veg??
Replies
9
Views
519
conor c
conor c
bignugs68
Struggle with cloudy enough?
Replies
9
Views
673
bignugs68
bignugs68
Spliffy Twojoints
Cloning during flower DIY bubble cloner
2
Replies
37
Views
2K
Spliffy Twojoints
Spliffy Twojoints
hugaddiction
500 seed pheno hunt
Replies
8
Views
603
Tumbleweedz
T
Back
Top