Will someone please build a low profile A/C for small grow tents!!!

Titikshu

Active Member
My flower space is only a 4x4 tent with a 1000watt HPS, but I want to supplement CO2 and control other parameters (temp/humidity). Although I can have much higher temps with CO2 supplementation, a higher humidity is usually recommended as well, right?

If I use an exhaust fan, not only do I loose CO2, but I pull in air that is only 30-40% humidity (NOT good if my temp is 80+ as it "should" be with CO2 supplementation). All other small A/C units are still too tall and big (so they'd take up 1-2 sq feet plant space in the tent or they are meant to be used outside where hot air can be exhausted into the open so in a tent it would actually just heat the space more!

With the industry where it is today, why can't one of you smarter engineering folks out there just build an A/C, heater, dehumidifier, humidifier all in 1 that is long and flat (less than 1foot tall) to fit under a grow table?

Does anyone else have a solution to this that they have actually done? ...Keeping in mind that I want the advantages of a sealed room (total control over temp/humidity/CO2) without 100 sq feet of space?


Thanks for reading the rants!
 

NewGrower2011

Well-Known Member
I've thought the same about an all in one, environment in a box that handles all 4.. heat, cool, humidify, dehumidify.

Would be nice if the rez for the humdifier could use the dehumidifier/cooling byproduct, etc. I'd say a tower that eats up a 1x1 space would even be acceptable. Gotta sacrifice some space inside tent for some crowds... But I'd also want to be able to duct it and have it outside the grow space.

Couple different sizes, etc. Any angel investors listening? :D
 

Titikshu

Active Member
I've thought the same about an all in one, environment in a box that handles all 4.. heat, cool, humidify, dehumidify.

Would be nice if the rez for the humdifier could use the dehumidifier/cooling byproduct, etc. I'd say a tower that eats up a 1x1 space would even be acceptable. Gotta sacrifice some space inside tent for some crowds... But I'd also want to be able to duct it and have it outside the grow space.

Couple different sizes, etc. Any angel investors listening? :D
Yes, a duct system that could run everything into one of the tent inputs would be great, right?
 

Titikshu

Active Member

Check that out.
Interesting for sure.... Rather than dealing with ice and taking some points from @420burn420 and @NewGrower2011 I could put the A/C in a small tent outside the room and run a circular duct system from and to that tent so air would be automatically circulated from the A/C tent and back.... mmm....All good ideas!!!

Thanks for the tips and ideas. Indoor growing certainly does exercise the creativity muscles.
 

Renfro

Well-Known Member
Maybe bust out of the tent, it's cramping your style. Get into a room sized grow and you will have plenty of space for gear.
 

Titikshu

Active Member
Maybe bust out of the tent, it's cramping your style. Get into a room sized grow and you will have plenty of space for gear.
Actually, the biggest room I could build would be just under a 12 x 12 and I would still have the same issues since I focus on cloning, not flower. The flowering area is just for testing genetics. The overall 12x12 space is easy since it can fit an A/C, humidifier, etc, but the environmental conditions for veg are different than flower and my flowering space would still only be 4x4.

I could solve it all with the purchase of 2 A/C units and 2 CO2 controllers, but I'm trying to work it all with only 1...
 

Titikshu

Active Member
Maybe something like this will help you out

I saw that. It cycles air though so in a closed space it would eventually just heat the whole thing up :( Thanks for the research though!!!
 
Top