Where to buy extra hanging bars for tent?
- Thread starter .Smoke
- Start date
Hook Daddy
Well-Known Member
Most people just go to the big box home stores and use pvc or metal conduit.
Boatguy
Well-Known Member
My acinfinity arrived missing a few poles. I emailed them, and they sent replacements no questions asked.
smokey0418
Well-Known Member
Wire closet shelving works well along the sides of my tent.
Could make something work like that across a roof as well to attach items.
Could make something work like that across a roof as well to attach items.
PopAndSonGrows
Well-Known Member
Use S-hooks.
farmingfisherman
Well-Known Member
PVC pipe and a Dremel tool and you can make most anything.
PopAndSonGrows
Well-Known Member
What do you mean by "hanging bars", anyway? Do you need to replace ceiling cross-bars, or are you just looking to add some?
I still say get a pack (or two) of s-hooks instead
I still say get a pack (or two) of s-hooks instead
.Smoke
Well-Known Member
I want a couple extra ceiling crossbars.
Pvc isn't an option given span+heat+weight.
farmingfisherman
Well-Known Member
What are you trying to hang in the tent? I've taken pvc and slid rebar threw it to make it stiffer and never had issues with hanging things like lights, blowers etc.
.Smoke
Well-Known Member
I normally have a 36" towerfan that I hang from the ceiling to circulate air.
It's nice to have it's own bar to be able to place where needed.
I also don't want to use the hanging wires on my new light just 4 ratchet straps which means it needs 2 bars itself.
Then there's the fan+filter...
Boatguy
Well-Known Member
I threw a chunk of plywood on top of my tent, and put the fan there.. Nice to have it outside
smokey0418
Well-Known Member
pressure treated fence boards cut just under 5 ft laying atop of my bars also work for attaching fans.
farmingfisherman
Well-Known Member
You say that but what happens when you need to adjust something?
farmingfisherman
Well-Known Member
I run my ratchet straps to the lights from the actual frame of the tent rather than the sliding cross bars. What type of light are you running? I can't imagine its any heavier than the lead balloon I'm screwing around with this run.
.Smoke
Well-Known Member
It's the MedicGrow Fold 8.I run my ratchet straps to the lights from the actual frame of the tent rather than the sliding cross bars. What type of light are you running? I can't imagine its any heavier than the lead balloon I'm screwing around with this run.
Dimensions around 45x43. Tent is 60x60 so I'm going to have to use the bars.
I like that idea.
I may be able to get away with using some of the bars from my 4x4 laying over the 5x5 bars...
Thanks
Kushash
Well-Known Member
google hanging bar set for grow tent and you will find a selection on amazon.
.Smoke
Well-Known Member
If you read the first post you'd have noticed I've already been there...
smokey0418
Well-Known Member
Using a jigsaw for example, I would also put a big radius on the corner of the boards just to make installation a bit easier above the bars and on the seams of tent
farmingfisherman
Well-Known Member
Not to familiar with that light but guessing by the size it's not a real light weight. Is the driver removable?