KevinSmith
Active Member
Hi,
Where would you guys recommend buying a grow tent on-line?
I am in Canada.
Thanks for the advice!
Where would you guys recommend buying a grow tent on-line?
I am in Canada.
Thanks for the advice!
Should paint it with something like Kilz. I was originally going to build one out of wood, and was told that it is very conducive to mold and to paint it before putting reflective material on the walls. My next thought was to build it out of PVC and fittings, but with 12" on center studs in the 4 walls and ceiling, it would have required 19 ten-foot 1" PVC tubes, 8 three-way 90 degree elbows, 6 four-way splitters, 18 three-way splitters, and a 10x25ft roll of panda film. I went down to Home Depot and bought a hacksaw and cordless drill, realized they didn't have any of the three or four way splitters. Went to the local plumbing supply store and got harassed by some guy with three teeth about what I could possibly need these splitters for. Decided that wasn't worth the hassle, came home, got high, randomly checked Amazon for grow tents, and almost immediately purchased this one for ~half the cost and ~one-tenth the time it would have taken to build one.Thanks for your reply.
Yes I did build it myself. (2X4's, 1X2's and 1/2" plywood. I got the veg cab done and working out heat issues. Then I have to build the ebb and flow system.
It is going well!
Then I have to start planning the flowering cab
I have actually already made several purchases from Greeners.www.greners.com
i forget who tossed me this link but it was very helpful i still refer back to it all the time incase i need to price something, havent ordered from them yet but ive got thru the site many many times
The entire box was primed and painted with top of the line benjamin moore bathroom paint (anti mold).Should paint it with something like Kilz. I was originally going to build one out of wood, and was told that it is very conducive to mold and to paint it before putting reflective material on the walls. My next thought was to build it out of PVC and fittings, but with 12" on center studs in the 4 walls and ceiling, it would have required 19 ten-foot 1" PVC tubes, 8 three-way 90 degree elbows, 6 four-way splitters, 18 three-way splitters, and a 10x25ft roll of panda film. I went down to Home Depot and bought a hacksaw and cordless drill, realized they didn't have any of the three or four way splitters. Went to the local plumbing supply store and got harassed by some guy with three teeth about what I could possibly need these splitters for. Decided that wasn't worth the hassle, came home, got high, randomly checked Amazon for grow tents, and almost immediately purchased this one for ~half the cost and ~one-tenth the time it would have taken to build one.
http://www.amazon.com/Mylar-HYDROPONIC-48x48x76-LEDwholesalers-GYO1008/dp/B002V9PBXO/ref=pd_sim_ol_3