Vero 29C Minimun Current?

Bruno Cencio

Active Member
DigiKey doesn´t seem to have CXM32 Gen4 on stock.

CXM-32-30-80-54-AC40, this is the part number I should be looking for, don't know if 2 or 3-step.

I can get the Gen7 for about half the price.
 

DangerDavez

Well-Known Member
The C version kinda sucks cause it restricts you to using CC drivers. And if that's what you wanna really do, you got 2 optiona to have all on one driver.

HLG-480H-C1400
HLG-480H-C1750(damn near Max this driver out perfect with 4 Vero29C.

You'd run 2 parallel series of 4 to split the current to 700 or 875 but your 272 total volts together still remain within the 343 and EXACTLY PERFECT 274 Max voltages of those 2 drivers.
You can run 2 at 1750 on a 240. It's what I did but it's better to run em softer so I have 2 series of 2 on that driver now
 

DangerDavez

Well-Known Member
If you haven't bought em, scratch all that and get the 36V I think D Version.
Opens up a whole other type of CV drivers to use and more ways to apply it to other CC drivers
No those are nowhere near as efficient as the C. Luminus are way better if you want lower voltage cobs
 

PSUAGRO.

Well-Known Member
Just stick some blux vero 29c gen7 on 120mm pin sink @ 75w for a good balance of efficiency and output==sphere tested.

Edit : generally speaking of course ,Your ambient comes into play
 

CobKits

Well-Known Member
DigiKey doesn´t seem to have CXM32 Gen4 on stock.

CXM-32-30-80-54-AC40, this is the part number I should be looking for, don't know if 2 or 3-step.

I can get the Gen7 for about half the price.
i recommend the cxm22 over 32 in all applications. larger chips just not worth the cost at our currents
 

DangerDavez

Well-Known Member
DigiKey doesn´t seem to have CXM32 Gen4 on stock.

CXM-32-30-80-54-AC40, this is the part number I should be looking for, don't know if 2 or 3-step.

I can get the Gen7 for about half the price.
If youre in the states you can look at cobkits and rapid led if you can't find what you want on digikey
 

Bruno Cencio

Active Member
Ok, was able to find CXM22 Gen4 at 3500k, should do the trick.

At 1050ma should deliver 52w of power, I'll find some drivers and make a build of each, CXM Gen4 3500k and Vero29C 3500k same watts side to side.

Any feedback on the supplementary light? The Q-strips at 2 x 4000k and 1 x 5000k (they say blue spectrum improves trichomes produccion).

And the 6 deep / 2 far red as booster also?

Not needed? Any way to improve?
 
Top