Vac purge won't build pressure

beginner420

beginner420

Well-Known Member
I just got a new vac it pro from eBay and it came with a 1 stage 3cfm pump. So I did a batch of bho and hooked everything up, the pump was plugged in, turned on, the valve on the vac chamber was on, the pump seemed to be making the right noises, I had the oil level just below the max level. When I put the bho in the indicator on the gauge wouldn't move and there seemed to be no pressure in the chamber. Does anyone know what could be wrong? Or if I did something wrong? Any help or tips would be appreciated

Sent from my HTC One using Rollitup mobile app
 

Attachments

J

JointOperation

Well-Known Member
check the seals.. if those are fine.. then the lines.. i bought the one on ebay that has the orange gasket thats flip able... should be getting it monday or tuesday.. since the first 1 i got .. was sold by the kids gf that i let borrow it to clean up his bho.. now i never am givin equipment out. ill make it. or he can buy his own
 
francy420

francy420

Well-Known Member
Push the lid down as you turn pump on. Sometimes they need just a bit of assistance getting it to seal.
 
beginner420

beginner420

Well-Known Member
How do you check the lines? Or the seals I'm new to this and am not quite sure how to do so, any help would be appreciated

Sent from my HTC One using Rollitup mobile app
 
Sirdabsalot462

Sirdabsalot462

Well-Known Member
Is the release valve open or closed?
*needs to be closed

Isolation valve needs to be open though.

When you turn the pump on, does your gauge move at all?

If it does, what does it read.?

There are a many possibilities, first we need to figure out if your gauge is working correctly.

Try, tapping lightly on the gauge when the pump is on,this sometimes is the problem.

I imagine between the Contributors and other oil gurus, we can get this figured out for you.
 
beginner420

beginner420

Well-Known Member
Thanks for the reply, the release valve is closed and the isolation valve is open. When I turn the pump on the gauge doesn't move at all and I tried tapping on it lightly

Sent from my HTC One using Rollitup mobile app
 
J

JointOperation

Well-Known Member
put a balloon in the chamber.. just tie the end.. and dont fill it up.. put it in.. if the balloon is filling with air wen u turn your pump on.. ur gauge could be fucked.
 
oilmkr420

oilmkr420

Active Member
Still not purged, splash some acetone on that bitch, and cook off the acetone however needed. It works well post extraction. Everything will lay flat w out pockets of tane.
beginner420 said:
So I did my first vac purge run it took me eleven and a half hours of purging, I put in 60 grams of nugs and got out 8.71 in final product

Sent from my HTC One using Rollitup mobile app
Click to expand...
 
oilmkr420

oilmkr420

Active Member
VWR is how I vacuum purge! Just need a stronger pump or perhaps hook it up in series instead of a parallel connection from the steel lines feeding one head into the other as to increase volume.IMG_20140329_140824.jpg
 
oilmkr420

oilmkr420

Active Member
For ease of small batch purging, acetone while that shits warm and kill it however needed, acetone rocks for purging. Get w it.
 
oilmkr420

oilmkr420

Active Member
Don't mean to hate, you got a nice flavanoid extract happening, but there is more potent shit out there.
 
beginner420

beginner420

Well-Known Member
I never said it was anything special , I said it was my first time purging bho and no offense but I don't think you know what the fuck you talking about

Sent from my HTC One using Rollitup mobile app
 
oilmkr420

oilmkr420

Active Member
It's nice and pretty. If it's a bit harsh, it's under purged. Ethanol it's even okay to leave residues as the last 25%is largely water, it promotes good vapor when the moisture content is <15%. It leaves the extract sweeter, but if acetone is used... leave no residues.
 
G

goalie

Active Member
beginner420 said:
So I did my first vac purge run it took me eleven and a half hours of purging, I put in 60 grams of nugs and got out 8.71 in final product

Sent from my HTC One using Rollitup mobile app
Click to expand...
Damn 11.5 hours for 8.7gs ....all the other forums i read say that for my under 2g runs i should be done in 2 hours or less, sounds like with your times they may be right. I know its not black and white like that tho

ANyway - what temps and how did you heat while you ran your pump for 11 hours?
 
You must log in or register to reply here.
Top