Understanding N-P-K

skate4theherb

Well-Known Member
Understanding how and when to fertilize is an important part of growing marijuana. Each bag or bottle of fertilizer is labeled with a set of numbers representing three of the macro-nutrients used by plants. These numbers are always in the same order and correspond to the specific plant nutrients nitrogen, phosphorous, and potassium (N-P-K). If you hadn’t guessed, the symbols N, P, and K are the same as used on the Periodic Table of Elements. An exception to this method of labeling is found in Australia where a fourth letter is assigned for Sulfur (S).

N-P-K value labeling is highly regulated by the country or state in which the fertilizer is intended to be sold. The value listed on fertilizer packaging for N is calculated by the percentage by weight. For example if the N-P-K reads 12-1-1, then the product is 12% nitrogen by weight. The labeling methods used for phosphorous and potassium are more complicated and do not represent the raw elemental values. Phosphorus is measured by its content of oxides while potassium is measured by its soluble compounds. This is important to understand because some fertilizers may contain much more of these nutrients than their manufacturers are allowed to print on the packaging. It should be noted that some fertilizer companies circumvent regulations by printing soluble and insoluble nutrient percentages on their labels.

Nitrogen (N)
Most of what you breathe is nitrogen, an odorless, colorless gas that constitutes over 75% of Earth’s atmosphere. Despite the overwhelming presence of atmospheric nitrogen, there are only a few kinds of plants in the legume family that can make use of it. Marijuana is not a legume, so nitrogen must be supplemented.

Synthetically-produced nitrogen fertilizer is made in the form of anhydrous ammonia from natural gas. Anhydrous ammonia is then usually converted into ammonium nitrate for storage and ease of application. Once granulated, the ammonium nitrate is ready for use as a cost-effective and easy-to-use plant food. Natural sources of nitrogen are numerous and include; blood meal, manure, bird and bat guano, among many others.

Because of its crucial role in photosynthesis, fertilizers high in nitrogen are used during the ‘vegetative’ phase of growing marijuana. Nitrogen is key to both chlorophyll and protein production and used throughout photosynthesis for the conversion of carbon into sugars and other organic compounds.

  • Grow fertilizers are high in nitrogen
  • Used for rapid growth
  • Used to build chlorophyll and promote a healthy green color
  • Improves volume and health of plant foliage
Phosphorus (P)
Phosphorous is a volatile and reactive element, which is why it is probably never found in its pure elemental form in nature. Because of this volatility, fertilizer packaging is actually showing a measure of its oxide (P2O5). Phosphorous is commonly refined from stone called phosphotite or mined from ‘guano islands’ comprised primarily of bird and bat dropping. A common biomass source of phosphorus is found in ground bone (bonemeal).

Marijuana plants use phosphorus throughout their growing cycles but at elevated levels when flowering. As the plants’ nutrient requirements change, the feeding schedule is adjusted to include ‘bloom foods’ with higher levels of phosphorus and lower levels of nitrogen. Because plants also use Phosphorus in root formation, low doses of it are often found in cloning solutions.

  • Bloom foods are higher in phosphorous
  • Improves bud production
  • Aids root development
  • Involved in oil and glucose production
Potassium (K)
Potassium is an alkali metal that reacts violently with water and oxidizes quite rapidly when exposed to air. This unstable nature requires that it be added to fertilizers in the form of potassium compounds known as potash. Not all forms of potash are suitable for plants; K2SO4 , K2SO4, 2MgSO4, and K2Mg2(SO4)3 are the three that seem the best suited for a plant’s needs. It should be noted that potassium oxide (K2O) is never used for fertilizer as it is caustic and hygroscopic. Like phosphorus, potassium is mined from mineral-laden ore.

Like N and P, potassium (K) is a key component in the metabolic functions of plants and plays a large role in the production of proteins and photosynthesis. Potassium also helps strengthen the marijuana plant’s immune system, which helps the plant cope with environmental stresses, including insects and diseases. Bloom formulated fertilizers often include increased levels of potassium because it helps improve flower quality.

  • Found in both ‘Grow’ and ‘Bloom’ fertilizers
  • Helps plants immune system
  • Increases flower quality
(http://www.marijuanagrowershq.com/understanding-npk/)
 

churchhaze

Well-Known Member
K2SO4 , K2SO4, 2MgSO4, and K2Mg2(SO4)3?

*shrug*

Please explain how 2MgSO4 has potassium. The best sources of potassium for hydroponics are potassium nitrate, mono potassium phosphate, and potassium hydroxide.

Potassium sulfate really isn't a great source of potassium as it will provide too much sulfate.

Understanding how and when to fertilize is an important part of growing marijuana. Each bag or bottle of fertilizer is labeled with a set of numbers representing three of the macro-nutrients used by plants. These numbers are always in the same order and correspond to the specific plant nutrients nitrogen, phosphorous, and potassium (N-P-K). If you hadn’t guessed, the symbols N, P, and K are the same as used on the Periodic Table of Elements. An exception to this method of labeling is found in Australia where a fourth letter is assigned for Sulfur (S).

N-P-K value labeling is highly regulated by the country or state in which the fertilizer is intended to be sold. The value listed on fertilizer packaging for N is calculated by the percentage by weight. For example if the N-P-K reads 12-1-1, then the product is 12% nitrogen by weight. The labeling methods used for phosphorous and potassium are more complicated and do not represent the raw elemental values. Phosphorus is measured by its content of oxides while potassium is measured by its soluble compounds. This is important to understand because some fertilizers may contain much more of these nutrients than their manufacturers are allowed to print on the packaging. It should be noted that some fertilizer companies circumvent regulations by printing soluble and insoluble nutrient percentages on their labels.

Nitrogen (N)
Most of what you breathe is nitrogen, an odorless, colorless gas that constitutes over 75% of Earth’s atmosphere. Despite the overwhelming presence of atmospheric nitrogen, there are only a few kinds of plants in the legume family that can make use of it. Marijuana is not a legume, so nitrogen must be supplemented.

Synthetically-produced nitrogen fertilizer is made in the form of anhydrous ammonia from natural gas. Anhydrous ammonia is then usually converted into ammonium nitrate for storage and ease of application. Once granulated, the ammonium nitrate is ready for use as a cost-effective and easy-to-use plant food. Natural sources of nitrogen are numerous and include; blood meal, manure, bird and bat guano, among many others.

Because of its crucial role in photosynthesis, fertilizers high in nitrogen are used during the ‘vegetative’ phase of growing marijuana. Nitrogen is key to both chlorophyll and protein production and used throughout photosynthesis for the conversion of carbon into sugars and other organic compounds.

  • Grow fertilizers are high in nitrogen
  • Used for rapid growth
  • Used to build chlorophyll and promote a healthy green color
  • Improves volume and health of plant foliage
Phosphorus (P)
Phosphorous is a volatile and reactive element, which is why it is probably never found in its pure elemental form in nature. Because of this volatility, fertilizer packaging is actually showing a measure of its oxide (P2O5). Phosphorous is commonly refined from stone called phosphotite or mined from ‘guano islands’ comprised primarily of bird and bat dropping. A common biomass source of phosphorus is found in ground bone (bonemeal).

Marijuana plants use phosphorus throughout their growing cycles but at elevated levels when flowering. As the plants’ nutrient requirements change, the feeding schedule is adjusted to include ‘bloom foods’ with higher levels of phosphorus and lower levels of nitrogen. Because plants also use Phosphorus in root formation, low doses of it are often found in cloning solutions.

  • Bloom foods are higher in phosphorous
  • Improves bud production
  • Aids root development
  • Involved in oil and glucose production
Potassium (K)
Potassium is an alkali metal that reacts violently with water and oxidizes quite rapidly when exposed to air. This unstable nature requires that it be added to fertilizers in the form of potassium compounds known as potash. Not all forms of potash are suitable for plants; K2SO4 , K2SO4, 2MgSO4, and K2Mg2(SO4)3 are the three that seem the best suited for a plant’s needs. It should be noted that potassium oxide (K2O) is never used for fertilizer as it is caustic and hygroscopic. Like phosphorus, potassium is mined from mineral-laden ore.

Like N and P, potassium (K) is a key component in the metabolic functions of plants and plays a large role in the production of proteins and photosynthesis. Potassium also helps strengthen the marijuana plant’s immune system, which helps the plant cope with environmental stresses, including insects and diseases. Bloom formulated fertilizers often include increased levels of potassium because it helps improve flower quality.

  • Found in both ‘Grow’ and ‘Bloom’ fertilizers
  • Helps plants immune system
  • Increases flower quality
(http://www.marijuanagrowershq.com/understanding-npk/)
 

danotunes

Active Member
Understanding how and when to fertilize is an important part of growing marijuana. Each bag or bottle of fertilizer is labeled with a set of numbers representing three of the macro-nutrients used by plants. These numbers are always in the same order and correspond to the specific plant nutrients nitrogen, phosphorous, and potassium (N-P-K). If you hadn’t guessed, the symbols N, P, and K are the same as used on the Periodic Table of Elements. An exception to this method of labeling is found in Australia where a fourth letter is assigned for Sulfur (S).

N-P-K value labeling is highly regulated by the country or state in which the fertilizer is intended to be sold. The value listed on fertilizer packaging for N is calculated by the percentage by weight. For example if the N-P-K reads 12-1-1, then the product is 12% nitrogen by weight. The labeling methods used for phosphorous and potassium are more complicated and do not represent the raw elemental values. Phosphorus is measured by its content of oxides while potassium is measured by its soluble compounds. This is important to understand because some fertilizers may contain much more of these nutrients than their manufacturers are allowed to print on the packaging. It should be noted that some fertilizer companies circumvent regulations by printing soluble and insoluble nutrient percentages on their labels.

Nitrogen (N)
Most of what you breathe is nitrogen, an odorless, colorless gas that constitutes over 75% of Earth’s atmosphere. Despite the overwhelming presence of atmospheric nitrogen, there are only a few kinds of plants in the legume family that can make use of it. Marijuana is not a legume, so nitrogen must be supplemented.

Synthetically-produced nitrogen fertilizer is made in the form of anhydrous ammonia from natural gas. Anhydrous ammonia is then usually converted into ammonium nitrate for storage and ease of application. Once granulated, the ammonium nitrate is ready for use as a cost-effective and easy-to-use plant food. Natural sources of nitrogen are numerous and include; blood meal, manure, bird and bat guano, among many others.

Because of its crucial role in photosynthesis, fertilizers high in nitrogen are used during the ‘vegetative’ phase of growing marijuana. Nitrogen is key to both chlorophyll and protein production and used throughout photosynthesis for the conversion of carbon into sugars and other organic compounds.

  • Grow fertilizers are high in nitrogen
  • Used for rapid growth
  • Used to build chlorophyll and promote a healthy green color
  • Improves volume and health of plant foliage
Phosphorus (P)
Phosphorous is a volatile and reactive element, which is why it is probably never found in its pure elemental form in nature. Because of this volatility, fertilizer packaging is actually showing a measure of its oxide (P2O5). Phosphorous is commonly refined from stone called phosphotite or mined from ‘guano islands’ comprised primarily of bird and bat dropping. A common biomass source of phosphorus is found in ground bone (bonemeal).

Marijuana plants use phosphorus throughout their growing cycles but at elevated levels when flowering. As the plants’ nutrient requirements change, the feeding schedule is adjusted to include ‘bloom foods’ with higher levels of phosphorus and lower levels of nitrogen. Because plants also use Phosphorus in root formation, low doses of it are often found in cloning solutions.

  • Bloom foods are higher in phosphorous
  • Improves bud production
  • Aids root development
  • Involved in oil and glucose production
Potassium (K)
Potassium is an alkali metal that reacts violently with water and oxidizes quite rapidly when exposed to air. This unstable nature requires that it be added to fertilizers in the form of potassium compounds known as potash. Not all forms of potash are suitable for plants; K2SO4 , K2SO4, 2MgSO4, and K2Mg2(SO4)3 are the three that seem the best suited for a plant’s needs. It should be noted that potassium oxide (K2O) is never used for fertilizer as it is caustic and hygroscopic. Like phosphorus, potassium is mined from mineral-laden ore.

Like N and P, potassium (K) is a key component in the metabolic functions of plants and plays a large role in the production of proteins and photosynthesis. Potassium also helps strengthen the marijuana plant’s immune system, which helps the plant cope with environmental stresses, including insects and diseases. Bloom formulated fertilizers often include increased levels of potassium because it helps improve flower quality.

  • Found in both ‘Grow’ and ‘Bloom’ fertilizers
  • Helps plants immune system
  • Increases flower quality
(http://www.marijuanagrowershq.com/understanding-npk/)
Man, just what I have been looking for. Thanks for posting
 

BROBIE

Well-Known Member
I think
K2SO4 , K2SO4, 2MgSO4, and K2Mg2(SO4)3?

*shrug*

Please explain how 2MgSO4 has potassium. The best sources of potassium for hydroponics are potassium nitrate, mono potassium phosphate, and potassium hydroxide.

Potassium sulfate really isn't a great source of potassium as it will provide too much sulfate.

I think the author meant Langbeinite. This article is a cut and paste from a cut and paste. LOL
 

skate4theherb

Well-Known Member
K2SO4 , K2SO4, 2MgSO4, and K2Mg2(SO4)3?

*shrug*

Please explain how 2 MgSO4 has potassium. The best sources of potassium for hydroponics are potassium nitrate, mono potassium phosphate, and potassium hydroxide.

Potassium sulfate really isn't a great source of potassium as it will provide too much sulfate.
I cant do that sir. because 2 MgSO4 is not potassium at all is magnesium sulfate (AKA Epsom salts) , but i know that your need magnesium with potassium because together the work as a act as catalysts in the creation of starches and sugars. I didn't write this post just sharing the info.. I thought rookies would find it useful,to have a better understand of the N.P.K.
How ever you can ASK the person who wrote this... http://www.marijuanagrowershq.com/understanding-npk/ <<<this link is below the post as well
 

JackHererSki

Well-Known Member
dude thanks for the info. some good knowledge on here. wahhhhh he cut and pasted it.

bro i dont care if you wrote it or some other guy did. As long as the information is accurate thats what matters.
 

Silky Shagsalot

Well-Known Member
i'm from the old school, i believe in the kiss method. i've been growing for about 12 years. i "keep it simple stupid." there is a plethora of info. out there. sometimes too much info. isn't a good thing. i just try and stick to the basics. you'll find a method that works for you, stick to that. i found someone that did what i wanted to do, and i copied him.
 

BROBIE

Well-Known Member
dude thanks for the info. some good knowledge on here. wahhhhh he cut and pasted it.

bro i dont care if you wrote it or some other guy did. As long as the information is accurate thats what matters.

I don't either. I was not ragging on the fact that it was cut and paste. I was bringing to light that cut and paste articles propagate through the internet, even with errors. If you don't care then why did you state "as long as it's accurate" ? it isn't. A blatant error. I brought to light that the author may have meant Langbeinite, in my attempt to clarify. I do things like that instead of going WAHHHHHH.
 
Top