dcasper75
Well-Known Member
hey guys iam pretty sure if ur on here uve seen danielsgb https://www.rollitup.org/grow-room-design-setup/326553-medicinal-refrigerator.html has done this succesfully with what iam calling a older fridge ie as in fridge at bottom frezzer at top well iam going to be trying to do this with a newer style fridge fridge and frezzer side by side the demesnsions are as followed for the over all size of the fridge 4ft8in tall 2ft4in wide and 2ft2in deep the inside demensions are 10 in wide 2ft2in deep and 4ft 8in tall on the frezzer side the fridge side is 1ft 5in wide 2ft 2 in deep and 4ft 8 in tall as of right now all i have going is the frezzer side i have 5 52 tru watt cfls in it along with a single tube light thats 15 watt i believe the largest problem truely the only problem iam having as of right now is temp with all those lights in there my temp after an hour rasied from 80 which was the ambeint temp to 95 after 4 hours its peeked up to 98 to 105 but fluxuates between that never any high and have checked on it every 25 min for the last 6 hours so any one can help me fix this the only thing i can think of as of now is to get a much larger cfm rated fan to exhuste the air but does anyone else have any ideas as of right now iam running the fan that came from the frezzer its self i know the volts and amps but have no clue what the cfm is on it does anyone know how to figure that out as well and i still have to figure out the fridge side right now the frezzer is getting air from the back bottom of the frezzer and exhusting it to the top in to the fridge ill post pics in a couple min but if anyone can give me hints tips ideas and advice id greatly appreciate it to the highest of degrees iam also setting up the frezzer in two parts uper and lower so i have to spots to start clones and what not