True HP Aero For 2011

More candy This is 1 of the controllers that will run my system it does automatic water changes and auto pulse flush The Reverse Osmosis system and uses optical sensors . The Reverse Osmosis system is a 100 gallon per day and i have the extra membrane to make it a 200 gallon a day won`t need it
Will post some more pics later.
Sent back the 12 nozzles i had and ordered 36 stainless ruby 30-50 micron nozzles should have them in a week or 2.

John Guest fittings and tubing
Batteries went dead in my camera send some more pics soon

hammer21 said:

View attachment 1660475More candyView attachment 1660473 This is 1 of the controllers that will run my system it does automatic water changes and auto pulse flush The Reverse Osmosis system and uses optical sensors . The Reverse Osmosis system is a 100 gallon per day and i have the extra membrane to make it a 200 gallon a day won`t need it
Will post some more pics later.
Sent back the 12 nozzles i had and ordered 36 stainless ruby 30-50 micron nozzles should have them in a week or 2.

Click to expand...

Jesus man! That's some fancy gadgetry. Are you gonna use one of those nute controller dealies? Right on par with what ya got thus far.

hammer21 said:

John Guest fittings and tubingView attachment 1660546

Click to expand...

Looks like about 5 bills worth of fittings/tubing.

Mike Young said:

9 amps, damn!.

Click to expand...

Hammer wins, his pulls 17amps

Still collecting and yes i will be able control PH swings, water changes etc.... complete automation is the direction i want to go and yes i will ba able to monitor everything on my phone

Atomizer said:

Hammer wins, his pulls 17amps

Click to expand...

60 psi on the pump? Did I miss something?

60 PSI is the factory setting MAX PSI is 150 @ 25 amps purrrs like a kitten 120 PSI that is what i have ran it at testing. you can go up to 200 PSI i have read with a simple mod

Gotcha. This should be one hellava setup. You move quick. The rate you're goin, yer gonna have plants growin before me.

Will not be able to start the system up until late september I will start the build in aug thats the plan got to keep things legal.

You shouldn`t have to worry about ph swings unless you plan to recirculate the nutes

Mike Young said:

9 amps, damn! That thing is a beast. Based on that alone, I'd quess that thing isn't all that quiet. I'm not sure of the draw on the aquatec, but the power supply is 800mA. Both my sureflo's were loud as shit. I was blown away by the low rpms of the aquatec. Thing is almost silent. Hope that badboy works for ya.

Click to expand...

LOL- 800ma is 8 amps- not much difference, but homebays fatboy is 17 amps, now that's a beast!

Mike Young said:

Jesus man! That's some fancy gadgetry. Are you gonna use one of those nute controller dealies? Right on par with what ya got thus far.

Click to expand...

Well, if he does DTW- then the periostolic nute pumps will be unnecessary...

And- good job with all the parts hammer, looks like you are just as serious about followthrough as we are. I don't see any legal reason why you can't build all your system now, and just don't pop a bean till your legal... You might be interested in this- finally some reason has struck... http://ca.news.yahoo.com/lawmakers-introduce-bill-legalize-marijuana-225335489.html

hammer21 said:

More eye candy 12 2-way 316 stainless solenoids with 4mm orficesView attachment 1660466
12 3-way 316 stainless solenoids with 4mm orfices
I will be using all 24 for a 12 pod system View attachment 1660463

Click to expand...

Real nice man.. I just got mine today- decided to get the premium ones treefarmer recommended and Mike got- they were 32 bucks/piece.. Got a link and prices for yours- just out of curiosity?

800mA is 0.8A

Atomizer said:

800mA is 0.8A

Click to expand...

That's another fine example of me not getting enough sleep... Thanks for the correction...

By the way- I've solved my filter setup/concerns. I found a 10" clear filter housing ( http://www.filtersfast.com/Pentek-158116-Filter-Housing.asp )that specifically has no air bleed valve, and bought some 1 micron filters for it. The plan is to install it between the res and the pump. I will install a jg check valve on the inlet of my pickup line (the very tip), and if air still gets in the system there will also be a y splitter with 2 on/off valves on each branch just after the pump, but before the accumulator. If I find air got into the pickup line during maintenance or res cleaning, I will simply close the valve from the Y going to the accumulator, and open the the other valve that circles back to the res. I'd have a switch to manually kick the pump in and cycle it until the air is quickly forced out- but bypassing all my components other than the pump and filter. -I knew I'd figure it out sooner or later...

Trichy you might have a problem with the set up the filter you are using is not a suction filter and you may burn that new pump up. I would put it after the accumulator with 2 pressure gages one on each side to monitor the filter. I purchased the nozzles from the same place and they are the same 0.12 stainless nozzles but with ruby inserts

One of many diy controllers that i have made this one does EBB and aero nft etc with a flip of a switch one controller that does everything
. And yes it will be able to do 1/10 second on the aero side when ready.

Pressure Relief Valve i will be using looking threw the garage for the rest of the parts .