TileMasters 1000w 9 plants*mixed strains from clone*medigrow
- Thread starter tilemaster
- Start date
R
RollingJoints
Guest
yesssssssss
tilemaster
Well-Known Member
RJ do u know wut that cfl 300 ran in USD?
Okay so i set out on this expanded electric mission..ill post a couple pics..of some be4 and after ..
wire used romex 10/2
breakers cutler hammer 20amp single phase
new construction outlet boxs
heavy duty 20amp outlets...
Hes a labradorI just recieved my 300watt cfl reflector the bulb is huge ill post some pics on my forum.
Okay so i set out on this expanded electric mission..ill post a couple pics..of some be4 and after ..
wire used romex 10/2
breakers cutler hammer 20amp single phase
new construction outlet boxs
heavy duty 20amp outlets...
Attachments
tilemaster
Well-Known Member
heres some more pics..my buddy custom welded those simple brackets for my A.C unit...custom . lag bolted to wall few minutes ago...all i got 2 do at this point is wire the breakers in ...and cut a whole and mount the a/c in.
as u can see i took a pic of part of my garage. that is the mrs.'s stuff. can u imagine if she got that out of the way the potential my footprint has?
Okay so i set out on this expanded electric mission..ill post a couple pics..of some be4 and after ..
wire used romex 10/2
breakers cutler hammer 20amp single phase
new construction outlet boxs
heavy duty 20amp outlets...[/quote]
Attachments
R
RollingJoints
Guest
Nice, looking forward to seeing the finish. How many plants you looking at to get in there?
mygirls
Medical Marijuana (MOD)
[/quote]
heres some more pics..my buddy custom welded those simple brackets for my A.C unit...custom . lag bolted to wall few minutes ago...all i got 2 do at this point is wire the breakers in ...and cut a whole and mount the a/c in.
as u can see i took a pic of part of my garage. that is the mrs.'s stuff. can u imagine if she got that out of the way the potential my footprint has?
Okay so i set out on this expanded electric mission..ill post a couple pics..of some be4 and after ..
wire used romex 10/2
breakers cutler hammer 20amp single phase
new construction outlet boxs
heavy duty 20amp outlets...
ah yes i can't wait till JUNE. i get my bedroom back and i get to make a new flower room.
tilemaster
Well-Known Member
ya ya..me 2..hmmm plants not sure yet.. i got the certain perameters to work with, this is a legal op. my numbers are increasing..Ive taken on 2 patients, and my inhouse girl ,shes my caregiver..but i wanna keeep it simple really. It may allow for more of a perpetual end result. I can say this much, a cheap non air cooled 1000hps , is wut will prob go in the bud room along with the existing 400 and 600. the 2 existing lights are air cooled, but i figure i could run the 1000 in a big reflector and with a/c not worry so much about venting the bulb.
The room is bout 7x7x 10high. right now lignts are hung over a 7x3.5 space. theres room to hang a 1000w over a 4x4 shaded area..and still give me space to walk. Id say the 9 girls I have in there right now are pushing my spacing out pretty thin.. so I run prob just 12 but spaced out more effeciently.
cant wait for u , how bigs the room...big dimensions i bet
ah yes i can't wait till JUNE. i get my bedroom back and i get to make a new flower room.[/quote]
Okay so finished electrical..all wired up.. think im ready for a/c. tommorrow will install a/c and more pics 2 come..heres wut ive got so far..
The room is bout 7x7x 10high. right now lignts are hung over a 7x3.5 space. theres room to hang a 1000w over a 4x4 shaded area..and still give me space to walk. Id say the 9 girls I have in there right now are pushing my spacing out pretty thin.. so I run prob just 12 but spaced out more effeciently.
cant wait for u , how bigs the room...big dimensions i bet
ah yes i can't wait till JUNE. i get my bedroom back and i get to make a new flower room.
[/quote]Okay so finished electrical..all wired up.. think im ready for a/c. tommorrow will install a/c and more pics 2 come..heres wut ive got so far..
Attachments
mygirls
Medical Marijuana (MOD)
ya ya..me 2..hmmm plants not sure yet.. i got the certain perameters to work with, this is a legal op. my numbers are increasing..Ive taken on 2 patients, and my inhouse girl ,shes my caregiver..but i wanna keeep it simple really. It may allow for more of a perpetual end result. I can say this much, a cheap non air cooled 1000hps , is wut will prob go in the bud room along with the existing 400 and 600. the 2 existing lights are air cooled, but i figure i could run the 1000 in a big reflector and with a/c not worry so much about venting the bulb.
The room is bout 7x7x 10high. right now lignts are hung over a 7x3.5 space. theres room to hang a 1000w over a 4x4 shaded area..and still give me space to walk. Id say the 9 girls I have in there right now are pushing my spacing out pretty thin.. so I run prob just 12 but spaced out more effeciently.
cant wait for u , how bigs the room...big dimensions i bet
ah yes i can't wait till JUNE. i get my bedroom back and i get to make a new flower room.
Okay so finished electrical..all wired up.. think im ready for a/c. tommorrow will install a/c and more pics 2 come..heres wut ive got so far..[/quote]
i see your running out of room,have to expand. LOLmy new roomwill be 8ft by 10ft at 7ft high.
just right for 6 little monsters
tilemaster
Well-Known Member
I like Monsterssss!!
just right for 6 little monsters [/quote]
i see your running out of room,have to expand. LOLmy new roomwill be 8ft by 10ft at 7ft high.
just right for 6 little monsters [/quote]
tilemaster
Well-Known Member
Okay so im ready to install A.C going in , in the am. support is hung and power supply is ready. a.c unit is 9 amps ...1020watts. says to only plug into grounded recepticle, never plug into an extension cord, or power strip, this is noted on the a.c units power cord. i have the new heavy duty 20amp recepticle and breaker for this very reason. Only question I still have is can I use a Hydrofarm Timer with this setup, to say 15 on 15 off while lights are on...anybody got any ideas whether using timer is safe? Hit me up with ideas for rep+
tilemaster
Well-Known Member
shit i know some of you guys run window a/c units right. by priciple the hot air vent in2 the cooler garage...and the a/c blows in2 the sealed grow. its mounted up higher and out of the way..but by my calculations...cool air will drift down anywayss. my main unanswered quiesitons...brewing...are: wut does this unit do to my RH levels..ie do i need a de humidifier now...can i plug this a.c unit in2 a hydrofarm timer rated past the a/c aperage and wattage(a/c cord says not to plug into anything) and finally....what does this unit do to my co2 levels..since im not runnin any co2........bumppp help me on my way to iccey
Lennard
Well-Known Member
I have window unit sir, my rooms humidity is higher this grow than last with these new tents Im building, its around 50-56 solid. It did NOT change when I added unit. I have mine running off a like twenty foot ext cord, three way splitter to the mini fridge haha. Everything stays cold brother, no cords warm up. I do run CO2 for 3 mins a hour but it will really start making a difference in flowering hopefully. If your setup is straight air tight it wont be after you put the a/c in so it will probably help you exchange the air a little better in there which is a good thing in your case id say since you arent running co2 routinly I like to leave my tent door off and let the garage air come in for all the hours im up actually. HTH
simpsonsampson420
Well-Known Member
the a/c unit i have also acts as a de-humidifier.. i dont know if its just the model i got or it they all do that... i run mine all the time right now and hover around 30% to at max 40% humidity.. it works well... you might have a slight raise in your RH, but it should be minimal!!.. i used co2 enrichment, so im not sure what itll do to your co2 levels.. i wouldnt think it would affect them at all... pretty much keep them where they are at id imagine...
mygirls
Medical Marijuana (MOD)
ya im the lucky one, just a 20" box fan in the window for exhaust or intake pending on how hot my room gets., and one 20" box fan to push the heat away from the plants over to the exhaust fan and out. works great. no dehumidifier or any thing else, co2.
now i can see all that changing when i get myother room as im adding one more 1000wtt hps.
tilemaster
Well-Known Member
NICE...Ya i feel u..i jsut wanted to do my electrical by the book..im runnin 1 k of light plus 200w sidlighting..plus 1020w 10000btu a/c..plus fans/exhaust..didnt wanna overload nothing..good lookn Lennard!
Mr. Blaze thanks for scribing my grow...nice 2 have a Guru..good lookn out..ill be checkn on ur monsters!
Simpsonsampson..my boy..thanks for the advice..so hookn a/c to a timer shouldnt be a big deal right? my RH levels w/o anything, is like 0%..dry up here..have to play the RH values by ear..good lookn
tilemaster
Well-Known Member
Ya for sure when u bump up to 2k of light i bet you'll least want a 6'' can fan , or a.c. ..but the cheaper u can rig, really the more effecient and smart you are. youve ran those box fans for how long now, and they cost what (20BUCKS?), and youve grown XXXamount of bud, good job brother
ya im the lucky one, just a 20" box fan in the window for exhaust or intake pending on how hot my room gets., and one 20" box fan to push the heat away from the plants over to the exhaust fan and out. works great. no dehumidifier or any thing else, co2.
mygirls
Medical Marijuana (MOD)
im going to run a couple cool tubes with my 4ft reflector hoods. that will do the trick.
tilemaster
Well-Known Member
okay update...
a.C is in..still gott a find a timer to regulate it..gonna run it something like 15 on 15off..for 12 hrs of lighting time.
White widow plants are showing a few and their first red hairs today. nothing else showing tho. Pics for u thirsty fuckers...
a.C is in..still gott a find a timer to regulate it..gonna run it something like 15 on 15off..for 12 hrs of lighting time.
White widow plants are showing a few and their first red hairs today. nothing else showing tho. Pics for u thirsty fuckers...
Attachments
M Blaze
Well-Known Member
No worries bro but im no Guru. I am basically just a very simple grower that has a simple and basic setup which we have managed to get dialed in due to experimenting and trialing different methods until we were happy with the results. There is always room for improvement and I am still always trying to improve my set up and methods just like everyone else.
Keep up the good work
