props to the tin knocker above! I am a builder for to looong now, my 60 thousand btu furnace is in the attic, it's pretty hot up there all winter long so imaging is not a concern unless they have other concerns get my drift, like telling your friends whom tell their friends ect, keep it between you and the tree and its all good, seperate grow rooom trash from household and destroy it or take it to the dump yourself, do not leave it for some pickers perousal. they find out first your growing then they image to gather evidence, if they have 75% on you allready they wont bother imaging they will knock most likly kick in the door, fun fun you gotta love um because i sure dont. there are so many units for heating and cooling which are installed indoors now, mainly to fit in confined spaces without ripping out walls and changing rooms, its quite impossible to say yup thats a grow room unless your over 2000 w coupled with contained heat. My view on insulation, I dont care how much you got , it eventually equalls out at least closely, outside heat and inside heat say for a month straight whats the inside temp now of the insulation the core temp, it eventually becomes the same as both the outside and inside equalls out, acclimates. unless its two foot thick and the temps never reach the core, if you wrapped ice in insulation put it in the hot sun , how long will it take for the ice to melt, a day possibly and its gone.
Invest in air cooled lights and a real good fan, if you have lenses on the lights you wont get aroma and you can use this exaust in the winter as heat, summer, vent it outside, 3- 400 watters air cooled run at 2 degrees above outside room temp. and only 82 f at the lens, tops resting on the lenses , plants likey like.
it would be great if all would leave one more bone behind each time, I.E. worst fuck up, best fix, cheap digs, we like um cheap and easy, we are all students the plant is the master.
Best new thang, drill a hole 1/8 inch a few inches above your pump rod, pipe, hose, when pump kicks on, the hole jets a small stream which recirculates your tank water, does nothing to interfear with delivery of ample water above and keeps things stirred up at the bottom where the airstones might not be pushing enough. I do this on sump pumps also , keeps the customers pumps from getting mucky on the bottom.
Worst so far, ive fucked them all up before!
root rot, added 32oz h202 to 25 gallons, ran for 24 hour, removed all roots sticking outa net pots , tore off ALL yellowing roots, squeazed excess
water from pots, soaked in a pan of 30% h202 for a min or two each, replaced to tray, , 12 hours later i flushed each tray with clean water, 3x the amount of medium, raised ph to 6, added super thrive and clone solution/new nutes , to tank, foliar sprayed with clean water 3 times a day for two days to mitigate the root loss. This has worked fine for me, maybe for you as well. I thought it was a bit rough also, but removing all the bad and going bad roots while killing the bacteria with h2o2 seems to have saved some very large plants which are thriving again after a three day down period.