Got any pics of the problem plants?Starting to get some deficiencies fml been mixing at 2.3EC dunno if I gotta raise it or what some plants chugging along fine some got way too much yellow I'd expect at that EC there's enough of everything View attachment 5042258
Got any pics of the problem plants?
I'm just a stooge but might be some knowledgeable growers venture in and give some advice
I'll check run off and get some pics tonight.Runoff EC of affected plants creeping up?
Most are going ok. I have really hard water so I started to get some clogging. So now I hand water the pots I know to have slacking emitters. There's something like 12 pots out 50 that need hand watering. I just ordered a 55lb bag of PEKacid which is like a powder form PH down and "fertilizer" supposed to help clear the drippers of mineral build up. Also will be more convenient than the liquid phosphoric acid I've been using.How are all those individual drip irrigation setups doing?
I've heard of the PEDacid. There was a thread (probably here) where someone was questioning whether it was the same thing as drip clean, or trying to diy drip clean.Most are going ok. I have really hard water so I started to get some clogging. So now I hand water the pots I know to have slacking emitters. There's something like 12 pots out 50 that need hand watering. I just ordered a 55lb bag of PEKacid which is like a powder form PH down and "fertilizer" supposed to help clear the drippers of mineral build up. Also will be more convenient than the liquid phosphoric acid I've been using.
There's like a membrane that gets pushed when the pump applies pressure, salts build up there and stop it opening as much or at all. The tubing doesn't really get clogged it's like 1/4. At least I haven't found any clogged tubing and I checked by blowing them all out. Also when I take the tubing off the drip emitter you can visibly see that some are at way lower output than others.I've heard of the PEDacid. There was a thread (probably here) where someone was questioning whether it was the same thing as drip clean, or trying to diy drip clean.
Do you think 55lbs will be enough though?...
It'd be interesting to take one of those drip emitters apart and see what's going on inside. Can you see visible clogging/salt buildup on the end of the length of tubing coming from the drip emitter (where it connects to the drip stake, I guess)? The dripper shouldn't clog, unless it's the "last thing in the line", ie: if there's a length of tubing after the dripper, and that goes to the plant/stake.
That's what I thought.
Oh. Well, that's fucked.There's like a membrane that gets pushed when the pump applies pressure, salts build up there and stop it opening as much or at all. The tubing doesn't really get clogged it's like 1/4. At least I haven't found any clogged tubing and I checked by blowing them all out. Also when I take the tubing off the drip emitter you can visibly see that some are at way lower output than others.
That's good then. Working right I'd think.No the water doesn't drain back.
Any thoughts on what, specifically, it might be? Calcium from your hardwater? Some other salt that's precipitating out? You're using floraflex now (on this run)? Were the pots drain holes surrounded with dry salt 'crust'? Had you been using that PEKacid?
I believe it's precipitated calcium carbonate. Similar to what comes out of your kettle if you have hard water like me. When I fill my reservoirs the water is cold as fuck. As the water warms up to the room temp it's ability to dissolve calcium carbonate actually goes down not up. So then calcium carbonate sediments into the reservoir and the lines.Any thoughts on what, specifically, it might be? Calcium from your hardwater? Some other salt that's precipitating out? You're using floraflex now (on this run)? Were the pots drain holes surrounded with dry salt 'crust'? Had you been using that PEKacid?
I'm just curious.
That's interesting about the solubility.I believe it's precipitated calcium carbonate. Similar to what comes out of your kettle if you have hard water like me. When I fill my reservoirs the water is cold as fuck. As the water warms up to the room temp it's ability to dissolve calcium carbonate actually goes down not up. So then calcium carbonate sediments into the reservoir and the lines.
View attachment 5058095View attachment 5058096
ive started using PEK acid as Ph down. And maybe will implement a weekly or monthly acid flush where I run low Ph stuff through to help clear out any mineral build up. In the mean time I just did an acid soak for all the emitters and seems to have unclogged all of them.
the white powder around the emitters in the PEKacid I added left like this for about 24H View attachment 5058090View attachment 5058091View attachment 5058092
here's the solubility curve of calcium carbonate