tokensmoke
Well-Known Member
Easy to do, its just THC off any tree that you choose turned into a syrupy form. This can be added to a bowl, to curing bud, or ate out of a spoon.
~Step 1~
Take a PVC pipe about 6 inches long. Make sure it isnt too big in diameter or else you will have to use a lot of tree. Now take two end caps (one for each end) and drill one small hole in one cap and drill seven small holes in the other cap. Attach the seven holed cap to the pipe. This is the bottom of the pipe. Fill the pipe with tree not exactly to the top but fill it up. Place the one holed cap on the open end of the pipe.
~Step 2~
Now, take one of those cans of butane that you fill butane lighters with(I will explain why the use of butane is needed) And place the nozzle in the hole of the TOP cap. Make sure you have a jar or something under the pipe end. Push it in dispersing the butane into the pipe, hold this for about ten minutes.
There will be a clear sometimes golden colored liquid draining from the seven holes into the container.
~Step 3~ IMPORTANT
Take your cantainer full of liquid, trash the tree, it isnt smokeable anymore. Anyways, take the container and run EXTREMELY HOT WATER around the sides of the container for about 5-10 minutes to evaporate the butane, making the liquid like a syrup and tadaa!
EXPLANATION ON BUTANE
Butane is used because unlike water, it does not dissolve the plant tissue or "eat" the THC, now I know it doesn't sound safe but if you do the hot water thing and your smart you will know that butane evaporates easily when exposed to heat. If you want to test this, then leave a butane lighter "crack lighter" in the sun, whatch what happens.
Have fun.
TNS
~Step 1~
Take a PVC pipe about 6 inches long. Make sure it isnt too big in diameter or else you will have to use a lot of tree. Now take two end caps (one for each end) and drill one small hole in one cap and drill seven small holes in the other cap. Attach the seven holed cap to the pipe. This is the bottom of the pipe. Fill the pipe with tree not exactly to the top but fill it up. Place the one holed cap on the open end of the pipe.
~Step 2~
Now, take one of those cans of butane that you fill butane lighters with(I will explain why the use of butane is needed) And place the nozzle in the hole of the TOP cap. Make sure you have a jar or something under the pipe end. Push it in dispersing the butane into the pipe, hold this for about ten minutes.
There will be a clear sometimes golden colored liquid draining from the seven holes into the container.
~Step 3~ IMPORTANT
Take your cantainer full of liquid, trash the tree, it isnt smokeable anymore. Anyways, take the container and run EXTREMELY HOT WATER around the sides of the container for about 5-10 minutes to evaporate the butane, making the liquid like a syrup and tadaa!
EXPLANATION ON BUTANE
Butane is used because unlike water, it does not dissolve the plant tissue or "eat" the THC, now I know it doesn't sound safe but if you do the hot water thing and your smart you will know that butane evaporates easily when exposed to heat. If you want to test this, then leave a butane lighter "crack lighter" in the sun, whatch what happens.
Have fun.
TNS