suspending net pots over a ebb and flow flood trey?

Has anyone ever done this, i have only seen 1 picture of this type of setup, it kinda like dwc except the it floods and drains on a cycle,,

my only concern is that the roots will dry out to quick after they leave the net pots.

I'm planning this for my next setup - 4 3x3 trays covered by Netwell Inserts.

Since the inserts are fairly tight on there, the humidity in the rootzone will be almost 100%, which should preclude the roots from drying out much if at all.

I grow in hydroton and flood every two hours, so roots drying out would not be a concern for me.

But as far as the concept goes, I'm in love with it and can't wait to get it setup - the only issue that I can think of is algae/mold growing on the underside of the insert, but some 35% H2O2 should handle that pretty well.

http://www.kalyx.com/store/proddetail.cfm/ItemID/896060/CategoryID/12000/SubCatID/2360/file.htm

EDIT: check out Tat2ues (sp.?) grow, he made a custom holder out of plywood or something, and he's running pretty good.

check it this is my setup... hmmm i didnt even think about the fact that when the plants plug up the netpot it will close off the flood trey pretty good? my trey is flush with the board holding my netpots

That looks like it should work okay, but you're gonna wanna make that tray opaque - that's gonna be algae central with clear plastic surrounding it.

Other then that it looks all right.