Super Thrive for Cloning??? ANY tips for cloning?*********+REP+************
- Thread starter Dirt Bikin Buds
- Start date
junglejim3
Member
Exactly How do you use it? How much and when? and is that all you use?
Fangule
Well-Known Member
I put drop in the rainwater I use to pre soak the pellets. Then I use remaining rainwater to moisten the tray.^^^^^^^ That clone was a freak of nature rooted @ 8 days and was looking like that 2 days later. Here she is now
burgertime2010
Well-Known Member
I start by spraying off the mother plant with plain water a few times. This cleans out the stomata as well as promoting cleanliness. Also, dark green nitrogen heavy mothers will root slower. Take cuts from the older growth, it has more stored hormones that cuts need. Keep everything very clean and humid with a 10 degree difference between roots and leaves. Leave them alone! Ph 5.5 in sterile water. Day 5 start removing dome to let them harden off, do not over soak, and start letting cubes get less and less wet. This promotes root development as they look for more h20.
tyke1973
Well-Known Member
Leave out the super thrive it causes burns,you are far better mixing a flowering nutes up very low dose though couple drops of a/b
been doing this for some time now its well known that clones like phos and pattas,
Has soon has you cut the clones put them into water for a hour or so this will help with wilting soak the cubes for a few hour in the light nute mix.clone x small amount on the cut tip and into the medium then under a propagator for 4/5 days mist 2 times a day for first 4 days then misting down to about 3 times a week.
Also don't let the cubes dry out keep them damp not sodden wet through.
leave the vents closed for first two days then open them or put a plastic bag sealer bag over them for two days then just make some holes in the bag after this if ya dont have a propagator.
next step don't rush them they may wilt but i found by soaking the stem in water for a hour or two this stops that ,but if they do they will bounce back.be patient they will root but may take two week,
After 7 days cut the misting out full stop make them work for the moisture this will make the stem,in the medium root faster.it aint rocket science i would advice if its your first time try and get the full stem under the medium right up to a set of nodes ,gage the size with a cock tail stick and make sure the stem is around 5 mm from the bottom of the medium eg rock wool or soil jiffy pellets.
been doing this for some time now its well known that clones like phos and pattas,
Has soon has you cut the clones put them into water for a hour or so this will help with wilting soak the cubes for a few hour in the light nute mix.clone x small amount on the cut tip and into the medium then under a propagator for 4/5 days mist 2 times a day for first 4 days then misting down to about 3 times a week.
Also don't let the cubes dry out keep them damp not sodden wet through.
leave the vents closed for first two days then open them or put a plastic bag sealer bag over them for two days then just make some holes in the bag after this if ya dont have a propagator.
next step don't rush them they may wilt but i found by soaking the stem in water for a hour or two this stops that ,but if they do they will bounce back.be patient they will root but may take two week,
After 7 days cut the misting out full stop make them work for the moisture this will make the stem,in the medium root faster.it aint rocket science i would advice if its your first time try and get the full stem under the medium right up to a set of nodes ,gage the size with a cock tail stick and make sure the stem is around 5 mm from the bottom of the medium eg rock wool or soil jiffy pellets.
Last edited:
shiftnopistons
Active Member
Hey fellow! This is an old thread and post, I know. To make your endeavors easier, I wanted to share with you that I actually dont pH the water, don't cut at a 45 degree angle, or put any nutrients to achieve a nearly a 100 percent rate. Yes, I know this sounds crazy, especially the 45 degree cut, but just try it as an experiment and you will see::: Take cuttings as you described and place them all in a cup of regular, un pH'd RO water. Leave on the new node with it's closest fan leaves, and two more fan leaves below that (Total 2 nodes).
Grab all the cuttings from the water and line em up so you can give em a nice hair cut with one swipe from a pair of scissors. Then cut them all the same length on the chopping block with your razor. Place your clones into pre-soaked (20 mins or so) rapid rooters and put them in your tray. Mist the shit out of them, put on the dome. I put a little water in the bottom of the tray and place it on a heating pad that automatically turns off after 2 hours and turn it on high twice, daily (morning and whenever i get home). I also mist them daily, heavily.
Here is what I see: No mold, guaranteed rooting, and less hassle. The 45 degree thing is considered a myth as noted by "The Grow Book." Cool, he's right and I feel silly for doing the cuts so meticulously before. I feed the standard low ppm fertilizer after I see root formation (bout a week)---- and that's when I pH. Until then, the bottom nodes ever so slightly turns yellow as it provides the clone with the nutrients it needs while roots develop.
smokingreenroom
Member
Clone X dipped in great white water solution at 5.5 ph........ Watch them take off
Superthrive can also throw some strains into morphs be careful with that stuff I use urine fresh cold urine once your urine hit the air into a bottle it becomes your best choice free and best nitrogen you can’t buy… put a drop or two in your water and you’ll be amazed at how healthy your clones will root and it’s my litterally third time trying to clone w/o nutrients and I’ve used my fresh urine and the clones are loving it…. One
/2 drops will help your water out and make your clones love any environment… and it’s all you really need for your grow too 1:20 parts 
with sand and silt from a great water creeks and rivers that are never the kind the dry up only use fresh year round streams,creeks & rivers with lots of minerals etc.,gold,silver,copper,magnesium etc., ETC., etc., year and thousands of years of fossilized fuel’$!!!!!!!!!!!!!! A-1 or AAA+++!!!!!!!!!!!!! Pinch pinch pinch pinching your plants three clones down which is usually only three-4 inches down your branches … pop’em not break’em off… pinch pop not breaking them off Leave’em on pinch pop’em!!!!!!!!!!!! They’ll got nut ’$!!!!!!!!!!!!!& sand and silt from out the fresh water will give your best ph balance you can’t buy “.Superthrive can also throw some strains into morphs be careful with that stuff I use urine fresh cold urine once your urine hit the air into a bottle it becomes your best choice free and best nitrogen you can’t buy… put a drop or two in your water and you’ll be amazed at how healthy your clones will root and it’s my litterally third time trying to clone w/o nutrients and I’ve used my fresh urine and the clones are loving it…. One
.”
Herb & Suds
Well-Known Member
Welcome to RIUSuperthrive can also throw some strains into morphs be careful with that stuff I use urine fresh cold urine once your urine hit the air into a bottle it becomes your best choice free and best nitrogen you can’t buy… put a drop or two in your water and you’ll be amazed at how healthy your clones will root and it’s my litterally third time trying to clone w/o nutrients and I’ve used my fresh urine and the clones are loving it…. One
I think you advice maybe a bit late since this thread died in 2014
As far as your advice it was a bit long for an old thread
bk78
Well-Known Member
Fresh urine thoWelcome to RIU
I think you advice maybe a bit late since this thread died in 2014
As far as your advice it was a bit long for an old thread
Herb & Suds
Well-Known Member
I saw it and decided it was sarcasm
Budzbuddha
Well-Known Member
What in the holy flying bag of jesus crispy cheese fucks is this psychotic krockidile / ketamine rant about ???Superthrive can also throw some strains into morphs be careful with that stuff I use urine fresh cold urine once your urine hit the air into a bottle it becomes your best choice free and best nitrogen you can’t buy… put a drop or two in your water and you’ll be amazed at how healthy your clones will root and it’s my litterally third time trying to clone w/o nutrients and I’ve used my fresh urine and the clones are loving it…. One
Do you soak your freshly urinated skivees in an air pump container to make “ feminized tea “ ?
Or do you squeeze your diaper over plant nodes ?
Maybe less blow - if you know what I’m sayin.
Budzbuddha
Well-Known Member
Better than urine - auxin rich canned cocaine.
No diaper soak myco tea …. No waving your pecker over your garden …. No more squeezing out the rubber bed sheets from the basement bedroom …
Brawndo’s evil twin
No diaper soak myco tea …. No waving your pecker over your garden …. No more squeezing out the rubber bed sheets from the basement bedroom …
Brawndo’s evil twin
PadawanWarrior
Well-Known Member
tyke1973
Well-Known Member
clone x is best for cloning superthrive once they have roots but just a drop it can burn clones easy superthrive.I have started using nothing other than taking clones in water for a hour stop any air getting caught up in stem.They may wilt for first day but don't worry I put them into pucks after that.Under a small.light I use a house lamp,should take about 7/14 days to root.Good luck